Window function
In signal processing and statistics, a window function (also known as an apodization function or tapering function^{[1]}) is a mathematical function that is zerovalued outside of some chosen interval, normally symmetric around the middle of the interval, usually near a maximum in the middle, and usually tapering away from the middle. Mathematically, when another function or waveform/datasequence is "multiplied" by a window function, the product is also zerovalued outside the interval: all that is left is the part where they overlap, the "view through the window". Equivalently, and in actual practice, the segment of data within the window is first isolated, and then only that data is multiplied by the window function values. Thus, tapering, not segmentation, is the main purpose of window functions.
The reasons for examining segments of a longer function include detection of transient events and timeaveraging of frequency spectra. The duration of the segments is determined in each application by requirements like time and frequency resolution. But that method also changes the frequency content of the signal by an effect called spectral leakage. Window functions allow us to distribute the leakage spectrally in different ways, according to the needs of the particular application. There are many choices detailed in this article, but many of the differences are so subtle as to be insignificant in practice.
In typical applications, the window functions used are nonnegative, smooth, "bellshaped" curves.^{[2]} Rectangle, triangle, and other functions can also be used. A rectangular window does not modify the data segment at all. It's only for modelling purposes that we say it multiplies by 1 inside the window and by 0 outside. A more general definition of window functions does not require them to be identically zero outside an interval, as long as the product of the window multiplied by its argument is square integrable, and, more specifically, that the function goes sufficiently rapidly toward zero.^{[3]}
Contents
ApplicationsEdit
Window functions are used in spectral analysis/modification/resynthesis,^{[4]} the design of finite impulse response filters, as well as beamforming and antenna design.
Spectral analysisEdit
The Fourier transform of the function cos ωt is zero, except at frequency ±ω. However, many other functions and waveforms do not have convenient closedform transforms. Alternatively, one might be interested in their spectral content only during a certain time period.
In either case, the Fourier transform (or a similar transform) can be applied on one or more finite intervals of the waveform. In general, the transform is applied to the product of the waveform and a window function. Any window (including rectangular) affects the spectral estimate computed by this method.
WindowingEdit
Windowing of a simple waveform like cos ωt causes its Fourier transform to develop nonzero values (commonly called spectral leakage) at frequencies other than ω. The leakage tends to be worst (highest) near ω and least at frequencies farthest from ω.
If the waveform under analysis comprises two sinusoids of different frequencies, leakage can interfere with the ability to distinguish them spectrally. If their frequencies are dissimilar and one component is weaker, then leakage from the stronger component can obscure the weaker one's presence. But if the frequencies are similar, leakage can render them unresolvable even when the sinusoids are of equal strength. The rectangular window has excellent resolution characteristics for sinusoids of comparable strength, but it is a poor choice for sinusoids of disparate amplitudes. This characteristic is sometimes described as low dynamic range.
At the other extreme of dynamic range are the windows with the poorest resolution and sensitivity, which is the ability to reveal relatively weak sinusoids in the presence of additive random noise. That is because the noise produces a stronger response with highdynamicrange windows than with highresolution windows. Therefore, highdynamicrange windows are most often justified in wideband applications, where the spectrum being analyzed is expected to contain many different components of various amplitudes.
In between the extremes are moderate windows, such as Hamming and Hann. They are commonly used in narrowband applications, such as the spectrum of a telephone channel. In summary, spectral analysis involves a tradeoff between resolving comparable strength components with similar frequencies and resolving disparate strength components with dissimilar frequencies. That tradeoff occurs when the window function is chosen.
Discretetime signalsEdit
When the input waveform is timesampled, instead of continuous, the analysis is usually done by applying a window function and then a discrete Fourier transform (DFT). But the DFT provides only a sparse sampling of the actual discretetime Fourier transform (DTFT) spectrum. Figure 2, row 3 shows a DTFT for a rectangularlywindowed sinusoid. The actual frequency of the sinusoid is indicated as "13" on the horizontal axis. Everything else is leakage, exaggerated by the use of a logarithmic presentation. The unit of frequency is "DFT bins"; that is, the integer values on the frequency axis correspond to the frequencies sampled by the DFT. So the figure depicts a case where the actual frequency of the sinusoid coincides with a DFT sample, and the maximum value of the spectrum is accurately measured by that sample. In row 4, it misses the maximum value by ½ bin, and the resultant measurement error is referred to as scalloping loss (inspired by the shape of the peak). For a known frequency, such as a musical note or a sinusoidal test signal, matching the frequency to a DFT bin can be prearranged by choices of a sampling rate and a window length that results in an integer number of cycles within the window.
Noise bandwidthEdit
The concepts of resolution and dynamic range tend to be somewhat subjective, depending on what the user is actually trying to do. But they also tend to be highly correlated with the total leakage, which is quantifiable. It is usually expressed as an equivalent bandwidth, B. It can be thought of as redistributing the DTFT into a rectangular shape with height equal to the spectral maximum and width B.^{[note 1]}^{[5]} The more the leakage, the greater the bandwidth. It is sometimes called noise equivalent bandwidth or equivalent noise bandwidth, because it is proportional to the average power that will be registered by each DFT bin when the input signal contains a random noise component (or is just random noise). A graph of the power spectrum, averaged over time, typically reveals a flat noise floor, caused by this effect. The height of the noise floor is proportional to B. So two different window functions can produce different noise floors.
Processing gain and lossesEdit
In signal processing, operations are chosen to improve some aspect of quality of a signal by exploiting the differences between the signal and the corrupting influences. When the signal is a sinusoid corrupted by additive random noise, spectral analysis distributes the signal and noise components differently, often making it easier to detect the signal's presence or measure certain characteristics, such as amplitude and frequency. Effectively, the signal to noise ratio (SNR) is improved by distributing the noise uniformly, while concentrating most of the sinusoid's energy around one frequency. Processing gain is a term often used to describe an SNR improvement. The processing gain of spectral analysis depends on the window function, both its noise bandwidth (B) and its potential scalloping loss. These effects partially offset, because windows with the least scalloping naturally have the most leakage.
Figure 3 depicts the effects of three different window functions on the same data set, comprising two equal strength sinusoids in additive noise. The frequencies of the sinusoids are chosen such that one encounters no scalloping and the other encounters maximum scalloping. Both sinusoids suffer less SNR loss under the Hann window than under the Blackman–Harris window. In general (as mentioned earlier), this is a deterrent to using highdynamicrange windows in lowdynamicrange applications.
Filter designEdit
Windows are sometimes used in the design of digital filters, in particular to convert an "ideal" impulse response of infinite duration, such as a sinc function, to a finite impulse response (FIR) filter design. That is called the window method.^{[6]}^{[7]}
Statistics and curve fittingEdit
Window functions are sometimes used in the field of statistical analysis to restrict the set of data being analyzed to a range near a given point, with a weighting factor that diminishes the effect of points farther away from the portion of the curve being fit. In the field of Bayesian analysis and curve fitting , this is often referred to as the kernel.
Rectangular window applicationsEdit
Analysis of transientsEdit
When analyzing a transient signal in modal analysis, such as an impulse, a shock response, a sine burst, a chirp burst, or noise burst, where the energy vs time distribution is extremely uneven, the rectangular window may be most appropriate. For instance, when most of the energy is located at the beginning of the recording, a nonrectangular window attenuates most of the energy, degrading the signaltonoise ratio.^{[8]}
Harmonic analysisEdit
One might wish to measure the harmonic content of a musical note from a particular instrument or the harmonic distortion of an amplifier at a given frequency. Referring again to Figure 2, we can observe that there is no leakage at a discrete set of harmonicallyrelated frequencies sampled by the DFT. (The spectral nulls are actually zerocrossings, which cannot be shown on a logarithmic scale such as this.) This property is unique to the rectangular window, and it must be appropriately configured for the signal frequency, as described above.
SymmetryEdit
The formulas provided in this article produce symmetrical sequences of variable length, N. Evennumbered values of N, which produce two equal center points, are uncommon in practice. More often, evenlength sequences, especially integer powers of 2 (for FFT usage), are obtained by generating only N1 values of an oddlength symmetrical sequence. The asymmetric result is known as periodic,^{[9]}^{[note 2]} or DFTeven.^{[10]} (see Sampling the DTFT, Case L = N+1) Such a window is generated by the MATLAB function hann(512,'periodic')
for instance. The version with two equal center points is generated by hann(512,'symmetric')
.
For a window function with zerovalued endpoints, deleting one or both endpoints has no effect on its DTFT (spectral leakage). But the function designed for N+1 samples, in anticipation of deleting an end point, typically has a slightly narrower main lobe, slightly higher sidelobes, and a slightly lower noise bandwidth. Similarly, deleting both zeros from a function designed for N+2 samples further magnifies those effects.
Referring again to Figure 2, there is also a cosmetic result of truncating an N+1 sample symmetric window. It happens when we sample the DTFT only at intervals of cycles/sample, which is the effect of an Npoint DFT. Another example is DFTeven Hann window, which shows that the Npoint DFT of the sequence generated by hann(N,'periodic') has only 3 nonzero values. All the other samples coincide with zerocrossings of the DTFT, which creates an illusion of little or no spectral leakage. Such a sparse sampling only reveals the leakage into the DFT bins from a sinusoid whose frequency is also an integer DFT bin. The unseen sidelobes reveal the leakage to expect from sinusoids at other frequencies.^{[11]} That is why it's important to sample the DTFT more densely (as we do in the subsequent sections) and choose a window that suppresses the sidelobes to an acceptable level.
A list of window functionsEdit
Terminology:
 represents the width, in samples, of a discretetime, symmetrical window function When N is an odd number, the windows have a single centerpoint. When N is even, they have two equal center points.
 It is sometimes useful to express as a sequence of samples of the lagged version of a zerophase function: ^{[12]}
 For odd values of N, the Nlength symmetric sequence of samples is known as the finite Fourier transform data window.^{[13]} And the (N1)length sequence is DFTeven, as described above.
 Each figure label includes the corresponding noise equivalent bandwidth metric (B),^{[note 1]} in units of DFT bins.
Rectangular windowEdit
The rectangular window (sometimes known as the boxcar or Dirichlet window) is the simplest window, equivalent to replacing all but N values of a data sequence by zeros, making it appear as though the waveform suddenly turns on and off:
Other windows are designed to moderate these sudden changes, which reduces scalloping loss and improves dynamic range, as described above (Window function#Spectral analysis).
The rectangular window is the 1st order Bspline window as well as the 0th power Powerofsine window.
Bspline windowsEdit
Bspline windows can be obtained as kfold convolutions of the rectangular window. They include the rectangular window itself (k = 1), the triangular window (k = 2) and the Parzen window (k = 4).^{[15]} Alternative definitions sample the appropriate normalized Bspline basis functions instead of convolving discretetime windows. A kth order Bspline basis function is a piecewise polynomial function of degree k−1 that is obtained by kfold selfconvolution of the rectangular function.
Triangular windowEdit
Triangular windows are given by:
where L can be N,^{[10]}^{[16]} N+1,^{[17]} or N1.^{[18]} The last one is also known as Bartlett window or Fejér window. All three definitions converge at large N.
The triangular window is the 2nd order Bspline window and can be seen as the convolution of two N/2 width rectangular windows. The Fourier transform of the result is the squared values of the transform of the halfwidth rectangular window.
Parzen windowEdit
The Parzen window, also known as the de la Vallée Poussin window,^{[10]} is the 4th order Bspline window given by:
Other polynomial windowsEdit
Welch windowEdit
The Welch window consists of a single parabolic section:
 .^{[17]}
The defining quadratic polynomial reaches a value of zero at the samples just outside the span of the window.
Sine windowEdit
The corresponding function is a cosine without the π/2 phase offset. So the sine window^{[19]} is sometimes also called cosine window.^{[10]}
The autocorrelation of a sine window produces a function known as the Bohman window.
Powerofsine/cosine windowsEdit
These window functions have the form:^{[20]}
The rectangular window (α = 0), the sine window (α = 1), and the Hann window (α = 2) are members of this family.
Cosinesum windowsEdit
This family is also known as generalized cosine windows. The symmetric and DFTeven (periodic) versions have the following forms, respectively:

(Eq.1)
 (N evenvalued)^{[21]}
In most cases, including the examples below, all coefficients a_{k} ≥ 0. The popular periodic form has only 2K + 1 nonzero Npoint DFT coefficients, and they are all realvalued (see Symmetry).^{[note 3]} These properties make periodic cosinesum windows a natural choice for realtime applications that require both windowed and nonwindowed (rectangularly windowed) transforms, because the windowed transforms can be efficiently derived from the nonwindowed transforms by convolution.^{[22]} The formulas below are symmetric. As discussed earlier, choosing an odd value of N and dropping the last coefficient also produces a periodic (DFTeven) window.
Hann and Hamming windowsEdit
The customary cosinesum windows for case K=1 have the form:
which is easily (and often) confused with its zerophase version:
Setting produces a Hann window:
 ^{[23]}
named after Julius von Hann, and sometimes referred to as Hanning, presumably due to its linguistic and formulaic similarities to the Hamming window. It is also known as raised cosine, because the zerophase version, is one lobe of an elevated cosine function.
This function is a member of both the cosinesum and powerofsine families. Unlike the Hamming window, the end points of the Hann window just touch zero. The resulting sidelobes roll off at about 18 dB per octave.^{[24]}
Setting to approximately 0.54, or more precisely 25/46, produces the Hamming window, proposed by Richard W. Hamming. That choice places a zerocrossing at frequency 5π/(N − 1), which cancels the first sidelobe of the Hann window, giving it a height of about onefifth that of the Hann window.^{[10]}^{[25]}^{[26]}
Approximation of the coefficients to two decimal places substantially lowers the level of sidelobes,^{[10]} to a nearly equiripple condition.^{[26]} In the equiripple sense, the optimal values for the coefficients are a_{0} = 0.53836 and a_{1} = 0.46164.^{[26]}^{[27]}
Blackman windowEdit
Blackman windows are defined as:
By common convention, the unqualified term Blackman window refers to Blackman's "not very serious proposal" of α = 0.16 (a_{0} = 0.42, a_{1} = 0.5, a_{2} = 0.08), which closely approximates the "exact Blackman",^{[28]} with a_{0} = 7938/18608 ≈ 0.42659, a_{1} = 9240/18608 ≈ 0.49656, and a_{2} = 1430/18608 ≈ 0.076849.^{[29]} These exact values place zeros at the third and fourth sidelobes,^{[10]} but result in a discontinuity at the edges and a 6 dB/oct falloff. The truncated coefficients do not null the sidelobes as well, but have an improved 18 dB/oct falloff.^{[10]}^{[30]}
Nuttall window, continuous first derivativeEdit
Considering n as a real number, the Nuttall window function and its first derivative are continuous everywhere, like in Hann. That is, the function goes to 0 at n = 0, unlike the Blackman–Nuttall and Blackman–Harris windows, which have a small positive value at zero (a "step" from the zero outside the window), like the Hamming window. The Blackman window defined via α is also continuous with continuous derivative at the edge, but the described "exact Blackman window" is not.
Blackman–Nuttall windowEdit
Blackman–Harris windowEdit
A generalization of the Hamming family, produced by adding more shifted sinc functions, meant to minimize sidelobe levels^{[31]}^{[32]}
Flat top windowEdit
A flat top window is a partially negativevalued window that has minimal scalloping loss in the frequency domain. That property is desirable for the measurement of amplitudes of sinusoidal frequency components.^{[14]}^{[33]} Drawbacks of the broad bandwidth are poor frequency resolution and high noise bandwidth.
Flat top windows can be designed using lowpass filter design methods,^{[33]} or they may be of the usual cosinesum variety:
The Matlab variant has these coefficients:
Other variations are available, such as sidelobes that roll off at the cost of higher values near the main lobe.^{[14]}
Rife–Vincent windowsEdit
RifeVincent windows^{[34]} are customarily scaled for unity average value, instead of unity peak value. The coefficient values below, applied to Eq.1, reflect that custom.
Class I, Order 1 (K=1): Functionally equivalent to the Hann window.
Class I, Order 2 (K=2):
Class I is defined by minimizing the highorder sidelobe amplitude. Coefficients for orders up to K=4 are tabulated.^{[35]}
Class II minimizes the mainlobe width for a given maximum sidelobe.
Class III is a compromise for which order K=2 resembles the Blackman window.^{[35]}^{[36]}
Adjustable windowsEdit
Gaussian windowEdit
The Fourier transform of a Gaussian is also a Gaussian (it is an eigenfunction of the Fourier transform). Since the Gaussian function extends to infinity, it must either be truncated at the ends of the window, or itself windowed with another zeroended window.^{[37]}
Since the log of a Gaussian produces a parabola, this can be used for nearly exact quadratic interpolation in frequency estimation.^{[37]}^{[38]}^{[39]}
The standard deviation of the Gaussian function is σ(N−1)/2 sampling periods.
Confined Gaussian windowEdit
The confined Gaussian window yields the smallest possible root mean square frequency width σ_{ω} for a given temporal width Nσ_{t}.^{[40]} These windows optimize the RMS timefrequency bandwidth products. They are computed as the minimum eigenvectors of a parameterdependent matrix. The confined Gaussian window family contains the sine window and the Gaussian window in the limiting cases of large and small σ_{t}, respectively.
Approximate confined Gaussian windowEdit
A confined Gaussian window of temporal width Nσ_{t} is well approximated by:^{[40]}
with the Gaussian:
The standard deviation of the approximate window is asymptotically equal (i.e. large values of N) to Nσ_{t} for σ_{t} < 0.14.^{[40]}
Generalized normal windowEdit
A more generalized version of the Gaussian window is the generalized normal window.^{[41]} Retaining the notation from the Gaussian window above, we can represent this window as
for any even . At , this is a Gaussian window and as approaches , this approximates to a rectangular window. The Fourier transform of this window does not exist in a closed form for a general . However, it demonstrates the other benefits of being smooth, adjustable bandwidth. Like the Tukey window discussed later, this window naturally offers a "flat top" to control the amplitude attenuation of a timeseries (on which we don't have a control with Gaussian window). In essence, it offers a good (controllable) compromise, in terms of spectral leakage, frequency resolution and amplitude attenuation, between the Gaussian window and the rectangular window. See also ^{[42]} for a study on timefrequency representation of this window (or function).
Tukey windowEdit
The Tukey window,^{[10]}^{[43]} also known as the tapered cosine window, can be regarded as a cosine lobe of width αN/2 that is convolved with a rectangular window of width (1 − α/2)N.
 ^{[note 4]}
At α = 0 it becomes rectangular, and at α = 1 it becomes a Hann window.
Plancktaper windowEdit
The socalled "Plancktaper" window is a bump function that has been widely used^{[44]} in the theory of partitions of unity in manifolds. It is smooth (a function) everywhere, but is exactly zero outside of a compact region, exactly one over an interval within that region, and varies smoothly and monotonically between those limits. Its use as a window function in signal processing was first suggested in the context of gravitationalwave astronomy, inspired by the Planck distribution.^{[45]} It is defined as a piecewise function:
where
The amount of tapering (the region over which the function is exactly 1) is controlled by the parameter ε, with smaller values giving sharper transitions.
DPSS or Slepian windowEdit
The DPSS (discrete prolate spheroidal sequence) or Slepian window maximizes the energy concentration in the main lobe,^{[46]} and is used in multitaper spectral analysis, which averages out noise in the spectrum and reduces information loss at the edges of the window.
The main lobe ends at a frequency bin given by the parameter α.^{[47]}
Kaiser windowEdit
The Kaiser, or KaiserBessel, window is a simple approximation of the DPSS window using Bessel functions, discovered by James Kaiser.^{[47]}^{[48]}^{[49]}^{[50]}
where I_{0} is the zeroth order modified Bessel function of the first kind. Variable parameter α determines the tradeoff between main lobe width and side lobe levels of the spectral leakage pattern. The main lobe width, in between the nulls, is given by in units of DFT bins,^{[51]} and a typical value of α is 3.
 Sometimes the formula for w(n) is written in terms of a parameter ^{[50]}
 zerophase version:
Dolph–Chebyshev windowEdit
Minimizes the Chebyshev norm of the sidelobes for a given main lobe width.^{[52]}
The zerophase Dolph–Chebyshev window function w_{0}(n) is usually defined in terms of its realvalued discrete Fourier transform, W_{0}(k):^{[53]}
which is Nperiodic. T_{n}(x) is the nth Chebyshev polynomial of the first kind evaluated in x, which can be computed using
and
is the unique positive real solution to , where the parameter α sets the Chebyshev norm of the sidelobes to −20α decibels.^{[52]}
The window function can be calculated from W_{0}(k) by an inverse discrete Fourier transform (DFT):^{[52]}
The lagged version of the window, with 0 ≤ n ≤ N−1, can be obtained by:
which for even values of N must be computed as follows:
which is an inverse DFT of
Variations:
 Due to the equiripple condition, the timedomain window has discontinuities at the edges. An approximation that avoids them, by allowing the equiripples to drop off at the edges, is a Taylor window.
 An alternative to the inverse DFT definition is also available.[2].
Ultraspherical windowEdit
The Ultraspherical window was introduced in 1984 by Roy Streit^{[54]} and has application in antenna array design,^{[55]} nonrecursive filter design,^{[54]} and spectrum analysis.^{[56]}
Like other adjustable windows, the Ultraspherical window has parameters that can be used to control its Fourier transform mainlobe width and relative sidelobe amplitude. Uncommon to other windows, it has an additional parameter which can be used to set the rate at which sidelobes decrease (or increase) in amplitude.^{[56]}^{[57]}
The window can be expressed in the timedomain as follows:^{[56]}
where is the Ultraspherical polynomial of degree N, and and control the sidelobe patterns.^{[56]}
Certain specific values of yield other wellknown windows: and give the Dolph–Chebyshev and Saramäki windows respectively.^{[54]} See here for illustration of Ultraspherical windows with varied parametrization.
Exponential or Poisson windowEdit
The Poisson window, or more generically the exponential window increases exponentially towards the center of the window and decreases exponentially in the second half. Since the exponential function never reaches zero, the values of the window at its limits are nonzero (it can be seen as the multiplication of an exponential function by a rectangular window ^{[58]}). It is defined by
where τ is the time constant of the function. The exponential function decays as e ≃ 2.71828 or approximately 8.69 dB per time constant.^{[59]} This means that for a targeted decay of D dB over half of the window length, the time constant τ is given by
Hybrid windowsEdit
Window functions have also been constructed as multiplicative or additive combinations of other windows.
Bartlett–Hann windowEdit
Planck–Bessel windowEdit
A Plancktaper window multiplied by a Kaiser window which is defined in terms of a modified Bessel function. This hybrid window function was introduced to decrease the peak sidelobe level of the Plancktaper window while still exploiting its good asymptotic decay.^{[60]} It has two tunable parameters, ε from the Plancktaper and α from the Kaiser window, so it can be adjusted to fit the requirements of a given signal.
Hann–Poisson windowEdit
A Hann window multiplied by a Poisson window, which has no sidelobes, in the sense that its Fourier transform drops off forever away from the main lobe. It can thus be used in hill climbing algorithms like Newton's method.^{[61]} The Hann–Poisson window is defined by:
where α is a parameter that controls the slope of the exponential.
Other windowsEdit
Lanczos windowEdit
 used in Lanczos resampling
 for the Lanczos window, is defined as
 also known as a sinc window, because:
 is the main lobe of a normalized sinc function
Comparison of windowsEdit
When selecting an appropriate window function for an application, this comparison graph may be useful. The frequency axis has units of FFT "bins" when the window of length N is applied to data and a transform of length N is computed. For instance, the value at frequency ½ "bin" (third tick mark) is the response that would be measured in bins k and k+1 to a sinusoidal signal at frequency k+½. It is relative to the maximum possible response, which occurs when the signal frequency is an integer number of bins. The value at frequency ½ is referred to as the maximum scalloping loss of the window, which is one metric used to compare windows. The rectangular window is noticeably worse than the others in terms of that metric.
Other metrics that can be seen are the width of the main lobe and the peak level of the sidelobes, which respectively determine the ability to resolve comparable strength signals and disparate strength signals. The rectangular window (for instance) is the best choice for the former and the worst choice for the latter. What cannot be seen from the graphs is that the rectangular window has the best noise bandwidth, which makes it a good candidate for detecting lowlevel sinusoids in an otherwise white noise environment. Interpolation techniques, such as zeropadding and frequencyshifting, are available to mitigate its potential scalloping loss.
Overlapping windowsEdit
When the length of a data set to be transformed is larger than necessary to provide the desired frequency resolution, a common practice is to subdivide it into smaller sets and window them individually. To mitigate the "loss" at the edges of the window, the individual sets may overlap in time. See Welch method of power spectral analysis and the modified discrete cosine transform.
Twodimensional windowsEdit
Twodimensional windows are used in, e.g., image processing. They can be constructed from onedimensional windows in either of two forms.^{[62]}
The separable form, is trivial to compute. The radial form, , which involves the radius , is isotropic, independent on the orientation of the coordinate axes. Only the Gaussian function is both separable and isotropic.^{[63]} The separable forms of all other window functions have corners that depend on the choice of the coordinate axes. The isotropy/anisotropy of a twodimensional window function is shared by its twodimensional Fourier transform. The difference between the separable and radial forms is akin to the result of diffraction from rectangular vs. circular appertures, which can be visualized in terms of the product of two sinc functions vs. an Airy function, respectively.
See alsoEdit
Wikimedia Commons has media related to Window function. 
NotesEdit
 ^ ^{a} ^{b} Mathematically, the noise equivalent bandwidth of transfer function H is the bandwidth of an ideal rectangular filter with the same peak gain as H that would pass the same power with white noise input. In the units of frequency f (e.g. hertz), it is given by:
 ^ Periodic is an oblique reference to the fact that symmetry is restored when the sequence is viewed as one cycle of a periodic sequence.
 ^ The Npoint DFT of an Nsample DFTeven Hann or Hamming window, for example, has only 3 DTFT samples that do not coincide with zerocrossings. An illustration, for N=16, can be viewed at DFTeven Hann window.
 ^ Also see havercosine (hvc) function.
ReferencesEdit
 ^ Weisstein, Eric W. (2003). CRC Concise Encyclopedia of Mathematics. CRC Press. ISBN 9781584883470.
 ^ Roads, Curtis (2002). Microsound. MIT Press. ISBN 9780262182157.
 ^ Cattani, Carlo; Rushchitsky, Jeremiah (2007). Wavelet and Wave Analysis As Applied to Materials With Micro Or Nanostructure. World Scientific. ISBN 9789812707840.
 ^ "OverlapAdd (OLA) STFT Processing  Spectral Audio Signal Processing". www.dsprelated.com. Retrieved 20160807.
The window is applied twice: once before the FFT (the "analysis window") and secondly after the inverse FFT prior to reconstruction by overlapadd (the socalled "synthesis window"). ... More generally, any positive COLA window can be split into an analysis and synthesis window pair by taking its square root.
 ^ Carlson, A. Bruce (1986). Communication Systems: An Introduction to Signals and Noise in Electrical Communication. McGrawHill. ISBN 9780070099609.
 ^ "FIR Filters by Windowing  The Lab Book Pages". www.labbookpages.co.uk. Retrieved 20160413.
 ^ Mastering Windows: Improving Reconstruction
 ^ "The Fundamentals of Signal Analysis Application Note 243" (PDF). hpmemoryproject.org. Retrieved 10 April 2018.
 ^ "Hann (Hanning) window  MATLAB hann". www.mathworks.com. Retrieved 20160413.
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} ^{g} ^{h} ^{i} ^{j} ^{k} ^{l} ^{m} ^{n} ^{o} Harris, Fredric J. (Jan 1978). "On the use of Windows for Harmonic Analysis with the Discrete Fourier Transform" (PDF). Proceedings of the IEEE. 66 (1): 51–83. CiteSeerX 10.1.1.649.9880. doi:10.1109/PROC.1978.10837. The fundamental 1978 paper on FFT windows by Harris, which specified many windows and introduced key metrics used to compare them.
 ^ Harris, Fredric J. (Jan 1978), fig 10, p 178.
 ^ Rorabaugh, C. Britton (October 1998). DSP Primer. Primer series. McGrawHill Professional. p. 196. ISBN 9780070540040.
 ^ Harris, Fredric J. (Jan 1978), sect V.E., p 63. Where we note that parameter N is our N1. That is because the author is ultimately only interested in evenlength asymmetric sequences.
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} ^{g} ^{h} ^{i} ^{j} Heinzel, G.; Rüdiger, A.; Schilling, R. (2002). Spectrum and spectral density estimation by the Discrete Fourier transform (DFT), including a comprehensive list of window functions and some new flattop windows (Technical report). Max Planck Institute (MPI) für Gravitationsphysik / Laser Interferometry & Gravitational Wave Astronomy. 395068.0. Retrieved 20130210.
 ^ Toraichi, K.; Kamada, M.; Itahashi, S.; Mori, R. (1989). "Window functions represented by Bspline functions". IEEE Transactions on Acoustics, Speech, and Signal Processing. 37: 145–147. doi:10.1109/29.17517.
 ^ "Triangular window  MATLAB triang". www.mathworks.com. Retrieved 20160413.
 ^ ^{a} ^{b} Welch, P. (1967). "The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms". IEEE Transactions on Audio and Electroacoustics. 15 (2): 70–73. doi:10.1109/TAU.1967.1161901.
 ^ "Bartlett Window". ccrma.stanford.edu. Retrieved 20160413.
 ^ Bosi, Marina; Goldberg, Richard E. (2003). "Time to Frequency Mapping Part II: The MDCT". Introduction to Digital Audio Coding and Standards. The Springer International Series in Engineering and Computer Science. 721. Boston, MA: Springer US. p. 106. doi:10.1007/9781461503279. ISBN 9781461503279.
 ^ "PowerofCosine Window Family". ccrma.stanford.edu. Retrieved 10 April 2018.
 ^ Harris, Fredric J. (Jan 1978), sect V.E., eq 31b, p 63.
 ^ US patent 6898235, Carlin, Joe; Terry Collins & Peter Hays et al., "Wideband communication intercept and direction finding device using hyperchannelization", issued 2005
 ^ "Hann (Hanning) window  MATLAB hann". www.mathworks.com. Retrieved 20160413.
 ^ "Hann or Hanning or Raised Cosine". ccrma.stanford.edu. Retrieved 20160413.
 ^ Enochson, Loren D.; Otnes, Robert K. (1968). Programming and Analysis for Digital Time Series Data. U.S. Dept. of Defense, Shock and Vibration Info. Center. p. 142.
 ^ ^{a} ^{b} ^{c} "Hamming Window". ccrma.stanford.edu. Retrieved 20160413.
 ^ Nuttall, A. H. (February 1981). "Some windows with very good sidelobe behavior". IEEE Transactions on Acoustics, Speech, and Signal Processing. ASSP29: 84–91.
 ^ W., Weisstein, Eric. "Blackman Function". mathworld.wolfram.com. Retrieved 20160413.
 ^ "Characteristics of Different Smoothing Windows  NI LabVIEW 8.6 Help". zone.ni.com. Retrieved 20160413.
 ^ Blackman, R. B.; Tukey, J. W. (19590101). The Measurement of Power Spectra from the Point of View of Communications Engineering. Dover Publications. p. 99. ISBN 9780486605074.
 ^ "BlackmanHarris Window Family". ccrma.stanford.edu. Retrieved 20160413.
 ^ "ThreeTerm BlackmanHarris Window". ccrma.stanford.edu. Retrieved 20160413.
 ^ ^{a} ^{b} Smith, Steven W. (2011). The Scientist and Engineer's Guide to Digital Signal Processing. San Diego, California, USA: California Technical Publishing. Retrieved 20130214.
 ^ Rife, David C.; Vincent, G. A. (1970), "Use of the discrete Fourier transform in the measurement of frequencies and levels of tones", Bell Syst. Tech. J., 49 (2): 197–228, doi:10.1002/j.15387305.1970.tb01766.x
 ^ ^{a} ^{b} Andria, Gregorio; Savino, Mario; Trotta, Amerigo (1989), "Windows and interpolation algorithms to improve electrical measurement accuracy", Instrumentation and Measurement, IEEE Transactions on, 38 (4): 856–863, doi:10.1109/19.31004
 ^ Schoukens, Joannes; Pintelon, Rik; Van Hamme, Hugo (1992), "The interpolated fast Fourier transform: a comparative study", Instrumentation and Measurement, IEEE Transactions on, 41 (2): 226–232, doi:10.1109/19.137352
 ^ ^{a} ^{b} "Gaussian Window and Transform". ccrma.stanford.edu. Retrieved 20160413.
 ^ "Matlab for the Gaussian Window". ccrma.stanford.edu. Retrieved 20160413.
Note that, on a dB scale, Gaussians are quadratic. This means that parabolic interpolation of a sampled Gaussian transform is exact. ... quadratic interpolation of spectral peaks may be more accurate on a logmagnitude scale (e.g., dB) than on a linear magnitude scale
 ^ "Quadratic Interpolation of Spectral Peaks". ccrma.stanford.edu. Retrieved 20160413.
 ^ ^{a} ^{b} ^{c} Starosielec, S.; Hägele, D. (2014). "Discretetime windows with minimal RMS bandwidth for given RMS temporal width". Signal Processing. 102: 240–246. doi:10.1016/j.sigpro.2014.03.033.
 ^ Debejyo Chakraborty and Narayan Kovvali Generalized Normal Window for Digital Signal Processing in IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) 2013 6083  6087 doi:10.1109/ICASSP.2013.6638833
 ^ Diethorn, E.J., "The generalized exponential timefrequency distribution," Signal Processing, IEEE Transactions on , vol.42, no.5, pp.1028,1037, May 1994 doi: 10.1109/78.295214
 ^ Tukey, J.W. (1967). "An introduction to the calculations of numerical spectrum analysis". Spectral Analysis of Time Series: 25–46.
 ^ Tu, Loring W. (2008). "Bump Functions and Partitions of Unity". An Introduction to Manifolds. Universitext. New York: Springer. pp. 127–134. doi:10.1007/9780387481012_13. ISBN 9780387480985.
 ^ McKechan, D. J. A.; Robinson, C.; Sathyaprakash, B. S. (21 April 2010). "A tapering window for timedomain templates and simulated signals in the detection of gravitational waves from coalescing compact binaries". Classical and Quantum Gravity. 27 (8): 084020. arXiv:1003.2939. Bibcode:2010CQGra..27h4020M. doi:10.1088/02649381/27/8/084020.
 ^ "Slepian or DPSS Window". ccrma.stanford.edu. Retrieved 20160413.
 ^ ^{a} ^{b} "Kaiser and DPSS Windows Compared". ccrma.stanford.edu. Retrieved 20160413.
 ^ Kaiser, James F.; Kuo, Franklin F. (1966). System Analysis by Digital Computer. John Wiley and Sons. pp. 232–235.
This family of window functions was "discovered" by Kaiser in 1962 following a discussion with B. F. Logan of the Bell Telephone Laboratories. ... Another valuable property of this family ... is that they also approximate closely the prolate spheroidal wave functions of order zero
 ^ Kaiser, James F. (November 1964). "A family of window functions having nearly ideal properties". Unpublished Memorandum.
 ^ ^{a} ^{b} "Kaiser Window". ccrma.stanford.edu. Retrieved 20160413.
 ^ Kaiser, James F.; Schafer, Ronald W. (1980). "On the use of the I_{0}sinh window for spectrum analysis". IEEE Transactions on Acoustics, Speech, and Signal Processing. 28: 105–107. doi:10.1109/TASSP.1980.1163349.
 ^ ^{a} ^{b} ^{c} "DolphChebyshev Window". ccrma.stanford.edu. Retrieved 20160413.
 ^ "DolphChebyshev Window Definition". ccrma.stanford.edu. Retrieved 20190305.
 ^ ^{a} ^{b} ^{c} Kabal, Peter (2009). "Time Windows for Linear Prediction of Speech" (PDF). Technical Report, Dept. Elec. & Comp. Eng., McGill University (2a): 31. Retrieved 2 February 2014.
 ^ Streit, Roy (1984). "A twoparameter family of weights for nonrecursive digital filters and antennas". Transactions of ASSP. 32: 108–118. doi:10.1109/tassp.1984.1164275.
 ^ ^{a} ^{b} ^{c} ^{d} Deczky, Andrew (2001). Unispherical Windows. IEEE Int. Symp. On Circuits and Systems. II. pp. 85–88. doi:10.1109/iscas.2001.921012. ISBN 9780780366855.
 ^ Bergen, S. W. A.; Antoniou, A. (2004). "Design of Ultraspherical Window Functions with Prescribed Spectral Characteristics". EURASIP Journal on Applied Signal Processing. 2004 (13): 2053–2065. Bibcode:2004EJASP2004...63B. doi:10.1155/S1110865704403114.
 ^ Smith, Julius O. III (April 23, 2011), Spectral Audio Signal Processing, retrieved November 22, 2011
 ^ Gade, Svend; Herlufsen, Henrik (1987). "Technical Review No 31987: Windows to FFT analysis (Part I)" (PDF). Brüel & Kjær. Retrieved November 22, 2011.
 ^ Berry, C. P. L.; Gair, J. R. (12 December 2012). "Observing the Galaxy's massive black hole with gravitational wave bursts". Monthly Notices of the Royal Astronomical Society. 429 (1): 589–612. arXiv:1210.2778. Bibcode:2013MNRAS.429..589B. doi:10.1093/mnras/sts360.
 ^ "HannPoisson Window". ccrma.stanford.edu. Retrieved 20160413.
 ^ Matt A. Bernstein, Kevin Franklin King, Xiaohong Joe Zhou (2007), Handbook of MRI Pulse Sequences, Elsevier; p.495499. [1]
 ^ Awad, A. I.; Baba, K. (2011). "An Application for Singular Point Location in Fingerprint Classification". Digital Information Processing and Communications. Communications in Computer and Information Science. 188. p. 262. doi:10.1007/9783642223891_24. ISBN 9783642223884.
Further readingEdit
 Albrecht, HansHelge (2012). Tailored minimum sidelobe and minimum sidelobe cosinesum windows. Version 1.0. PhysikalischTechnische Bundesanstalt. doi:10.7795/110.20121022aa. ISBN 9783869182810.
 Bergen, S. W. A.; Antoniou, A. (2004). "Design of Ultraspherical Window Functions with Prescribed Spectral Characteristics". EURASIP Journal on Applied Signal Processing. 2004 (13): 2053–2065. Bibcode:2004EJASP2004...63B. doi:10.1155/S1110865704403114.
 Bergen, S. W. A.; Antoniou, A. (2005). "Design of Nonrecursive Digital Filters Using the Ultraspherical Window Function". EURASIP Journal on Applied Signal Processing. 2005 (12): 1910–1922. Bibcode:2005EJASP2005...44B. doi:10.1155/ASP.2005.1910.
 Nuttall, Albert H. (February 1981). "Some Windows with Very Good Sidelobe Behavior". IEEE Transactions on Acoustics, Speech, and Signal Processing. 29 (1): 84–91. doi:10.1109/TASSP.1981.1163506. Extends Harris' paper, covering all the window functions known at the time, along with key metric comparisons.
 Oppenheim, Alan V.; Schafer, Ronald W.; Buck, John A. (1999). Discretetime signal processing. Upper Saddle River, N.J.: Prentice Hall. pp. 468–471. ISBN 9780137549207.
 Prabhu, K. M. M. (2014). Window Functions and Their Applications in Signal Processing. Boca Raton, FL: CRC Press. ISBN 9781466515833.
 US patent 7065150, Park, YoungSeo, "System and method for generating a root raised cosine orthogonal frequency division multiplexing (RRC OFDM) modulation", published 2003, issued 2006
External linksEdit
 LabView Help, Characteristics of Smoothing Filters, http://zone.ni.com/reference/enXX/help/371361B01/lvanlsconcepts/char_smoothing_windows/
 Evaluation of Various Window Function using MultiInstrument, http://www.multiinstrument.com/doc/D1003/Evaluation_of_Various_Window_Functions_using_MultiInstrument_D1003.pdf
 Creation and properties of Cosinesum Window functions, http://electronicsart.weebly.com/fftwindows.html