A set-top box (STB) or set-top unit (STU) (one type also colloquially known as a cable box) is an information appliance device that generally contains a TV-tuner input and displays output to a television set and an external source of signal, turning the source signal into content in a form that can then be displayed on the television screen or other display device. They are used in cable television, satellite television, and over-the-air television systems, as well as other uses.
According to the Los Angeles Times, the cost to a cable provider for a set-top box is between $150 for a basic box to $250 for a more sophisticated box in the United States. In 2016, the average pay-TV subscriber paid $231 per year to lease their set-top box from a cable service provider.
TV signal sourcesEdit
The signal source might be an Ethernet cable, a satellite dish, a coaxial cable (see cable television), a telephone line (including DSL connections), broadband over power lines (BPL), or even an ordinary VHF or UHF antenna. Content, in this context, could mean any or all of video, audio, Internet web pages, interactive video games, or other possibilities. Satellite and microwave-based services also require specific external receiver hardware, so the use of set-top boxes of various formats has never completely disappeared. Set-top boxes can also enhance source signal quality.
Before the All-Channel Receiver Act of 1962 required US television receivers to be able to tune the entire VHF and UHF range (which in North America was NTSC-M channels 2 through 83 on 54 to 890 MHz), a set-top box known as a UHF converter would be installed at the receiver to shift a portion of the UHF-TV spectrum onto low-VHF channels for viewing. As some 1960s-era 12-channel TV sets remained in use for many years, and Canada and Mexico were slower than the US to require UHF tuners to be factory-installed in new TVs, a market for these converters continued to exist for much of the 1970s.
Cable television represented a possible alternative to deployment of UHF converters as broadcasts could be frequency-shifted to VHF channels at the cable head-end instead of the final viewing location. However, most cable systems could not accommodate the full 54-890 MHz VHF/UHF frequency range and the twelve channels of VHF space were quickly exhausted on most systems. Adding any additional channels therefore needed to be done by inserting the extra signals into cable systems on nonstandard frequencies, typically either below VHF channel 7 (midband) or directly above VHF channel 13 (superband).
These frequencies corresponded to non-television services (such as two-way radio) over-the-air and were therefore not on standard TV receivers. Before cable-ready TV sets became common in the late 1980s, an electronic tuning device called a cable converter box was needed to receive the additional analog cable TV channels and transpose or convert the selected channel to analog radio frequency (RF) for viewing on a regular TV set on a single channel, usually VHF channel 3 or 4. The box allowed an analog non-cable-ready television set to receive analog encrypted cable channels and was a prototype topology for later date digital encryption devices. Newer televisions were then converted to be analog cypher cable-ready, with the standard converter built-in for selling premium television (aka pay per view). Several years later and slowly marketed, the advent of digital cable continued and increased the need for various forms of these devices. Block conversion of the entire affected frequency band onto UHF, while less common, was used by some models to provide full VCR compatibility and the ability to drive multiple TV sets, albeit with a somewhat nonstandard channel numbering scheme.
Newer television receivers greatly reduced the need for external set-top boxes, although cable converter boxes continue to be used to descramble premium cable channels according to carrier-controlled access restrictions, and to receive digital cable channels, along with using interactive services like video on demand, pay per view, and home shopping through television.
Set-top boxes were also made to enable closed captioning on older sets in North America, before this became a mandated inclusion in new TV sets. Some have also been produced to mute the audio (or replace it with noise) when profanity is detected in the captioning, where the offensive word is also blocked. Some also include a V-chip that allows only programs of some television content ratings. A function that limits children's time watching TV or playing video games may also be built in, though some of these work on main electricity rather than the video signal.
Digital television adapterEdit
The transition to digital terrestrial television after the turn of the millennium left many existing television receivers unable to tune and display the new signal directly. In the United States, where analog shutdown was completed in 2009 for full-service broadcasters, a federal subsidy was offered for coupon-eligible converter boxes with deliberately limited capability which would restore signals lost to digital transition.
Professional set-top boxEdit
Professional set-top boxes are referred to as IRDs or integrated receiver/decoders in the professional broadcast audio/video industry. They are designed for more robust field handling and rack mounting environments. IRDs are capable of outputting uncompressed serial digital interface signals, unlike consumer STBs which usually don't, mostly because of copyright reasons.
Hybrid set-top boxes, such as those used for Smart TV programming, enable viewers to access multiple TV delivery methods (including terrestrial, cable, internet, and satellite); like IPTV boxes, they include video on demand, time-shifting TV, Internet applications, video telephony, surveillance, gaming, shopping, TV-centric electronic program guides, and e-government. By integrating varying delivery streams, hybrids (sometimes known as "TV-centric") enable pay-TV operators more flexible application deployment, which decreases the cost of launching new services, increases speed to market, and limits disruption for consumers.
As examples, Hybrid Broadcast Broadband TV (HbbTV) set-top boxes allow traditional TV broadcasts, whether from terrestrial (DTT), satellite, or cable providers, to be brought together with video delivered over the Internet and personal multimedia content. Advanced Digital Broadcast (ADB) launched its first hybrid DTT/IPTV set-top box in 2005, which provided Telefónica with the digital TV platform for its Movistar TV service by the end of that year. In 2009, ADB provided Europe's first three-way hybrid digital TV platform to Polish digital satellite operator n, which enables subscribers to view integrated content whether delivered via satellite, terrestrial, or internet.
In IPTV networks, the set-top box is a small computer providing two-way communications on an IP network and decoding the video streaming media. IP set-top boxes have a built-in home network interface that can be Ethernet, Wireless (802.11 g,n,ac), or one of the existing wire home networking technologies such as HomePNA or the ITU-T G.hn standard, which provides a way to create a high-speed (up to 1Gbit/s) local area network using existing home wiring (power lines, phone lines, and coaxial cables).
This type of service is distinct from Internet television, which involves third-party content over the public Internet not controlled by the local system operator.
Electronic program guideEdit
Electronic program guides and interactive program guides provide users of television, radio, and other media applications with continuously updated menus displaying broadcast programming or scheduling information for current and upcoming programming. Some guides, such as ITV, also feature backward scrolling to promote their catch-up content.
This feature allows the user to choose preferred channels, making them easier and quicker to access; this is handy with the wide range of digital channels on offer. The concept of favourite channels is superficially similar to that of the "bookmark" function offered in many Web browsers.
The timer allows the user to program and enable the box to switch between channels at certain times: this is handy to record from more than one channel while the user is out. The user still needs to program the VCR or DVD recorder.
Controls on the boxEdit
Some models have controls on the box, as well as on the remote control. This is useful should the user lose the remote or if the batteries age.
Remote controls that work with other TVsEdit
Some remote controls can also control some basic functions of various brands of TVs. This allows the user to use just one remote to turn the TV on and off, adjust volume, or switch between digital and analog TV channels or between terrestrial and internet channels.
The parental lock or content filters allow users over 18 years old to block access to channels that are not appropriate for children, using a personal identification number. Some boxes simply block all channels, while others allow the user to restrict access to chosen channels not suitable for children below certain ages.
As complexity and potential programming faults of the set-top box increase, software such as MythTV, Select-TV and Microsoft's Media Center have developed features comparable to those of set-top boxes, ranging from basic DVR-like functionality to DVD copying, home automation, and housewide music or video playback.
Firmware update featuresEdit
Almost all modern set-top boxes feature automatic firmware update processes. The firmware update is typically provided by the service provider.
Ambiguities in the definitionEdit
With the advent of flat-panel televisions, set-top boxes are now deeper in profile than the tops of most modern TV sets. Because of this, set-top boxes are often placed beneath televisions, and the term set-top box has become something of a misnomer, possibly helping the adoption of the term digibox. Additionally, newer set-top boxes that sit at the edge of IP-based distribution networks are often called net-top boxes or NTBs, to differentiate between IP and RF inputs. The Roku LT is around the size of a pack of cards and delivers Smart TV to conventional sets.
The distinction between external tuner or demodulator boxes (traditionally considered to be "set-top boxes") and storage devices (such as VCR, DVD, or disc-based PVR units) is also blurred by the increasing deployment of satellite and cable tuner boxes with hard disk, network or USB interfaces built-in.
In Europe, a set-top box does not necessarily contain a tuner of its own. A box connected to a television (or VCR) SCART connector is fed with the baseband television signal from the set's tuner, and can have the television display the returned processed signal instead.
This SCART feature had been used for connection to analogue decoding equipment by pay TV operators in Europe, and in the past was used for connection to teletext equipment before the decoders became built-in. The outgoing signal could be of the same nature as the incoming signal, or RGB component video, or even an "insert" over the original signal, due to the "fast switching" feature of SCART.
In case of analogue pay-TV, this approach avoided the need for a second remote control. The use of digital television signals in more modern pay-TV schemes requires that decoding take place before the digital-to-analogue conversion step, rendering the video outputs of an analogue SCART connector no longer suitable for interconnection to decryption hardware. Standards such as DVB's Common Interface and ATSC's CableCARD therefore use a PCMCIA-like card inserted as part of the digital signal path as their alternative to a tuner-equipped set-top box.
In June 2011 a report from the American National Resources Defense Council brought attention to the energy efficiency of set-top boxes, and the US Department of Energy announced plans to consider the adoption of energy efficiency standards for set-top boxes. In November 2011, the National Cable & Telecommunications Association announced a new energy efficiency initiative that commits the largest American cable operators to the purchase of set-top boxes that meet Energy Star standards and the development of sleep modes that will use less energy when the set-top box is not being used to watch or record video.
|Wikimedia Commons has media related to Set-top boxes.|
- Lazarus, David (2018-10-30). "How much does a cable box really cost? The industry would prefer you don't ask". Los Angeles Times. Retrieved 2018-11-01.
- "Welcome to Inview". Inview Technology. 2013-07-26. Archived from the original on 2013-08-01.
- "Archived copy". Archived from the original on 2010-04-05. Retrieved 2010-06-02.CS1 maint: Archived copy as title (link)
- "About - DVB". www.dvb.org. Archived from the original on 6 June 2013. Retrieved 28 April 2018.
- "Archived copy". Archived from the original on 2012-02-27. Retrieved 2013-06-15.CS1 maint: Archived copy as title (link)
- "ADB takes 'n' hybrid". broadbandtvnews.com. 12 September 2009. Archived from the original on 4 July 2017. Retrieved 28 April 2018.
- New global standard for fully networked home Archived 2009-02-21 at the Wayback Machine, ITU-T Press Release
- "Today - TV Guide". itv.com. Archived from the original on 1 December 2017. Retrieved 28 April 2018.
- "The Chimera of Software Quality". Archived from the original on 2018-04-28. 080322 computer.org
- Which? Consumer's Guide; October 2012; page 41
- "Archived copy" (PDF). Archived (PDF) from the original on 2012-02-25. Retrieved 2012-02-25.CS1 maint: Archived copy as title (link) Natural Resources Defense Council.
- "Archived copy". Archived from the original on 2012-01-29. Retrieved 2012-02-25.CS1 maint: Archived copy as title (link) Environmental and Energy Study Institute
- "Archived copy". Archived from the original on 2012-05-12. Retrieved 2012-04-20.CS1 maint: Archived copy as title (link)