# Screw axis

A **screw axis** (**helical axis** or **twist axis**) is a line that is simultaneously the axis of rotation and the line along which translation of a body occurs. Chasles' theorem shows that each Euclidean displacement in three-dimensional space has a screw axis, and the displacement can be decomposed into a rotation about and a slide along this screw axis.^{[1]}^{[2]}

Plücker coordinates are used to locate a screw axis in space, and consist of a pair of three-dimensional vectors. The first vector identifies the direction of the axis, and the second locates its position. The special case when the first vector is zero is interpreted as a pure translation in the direction of the second vector. A screw axis is associated with each pair of vectors in the algebra of screws, also known as screw theory.^{[3]}

The spatial movement of a body can be represented by a continuous set of displacements. Because each of these displacements has a screw axis, the movement has an associated ruled surface known as a *screw surface*. This surface is not the same as the *axode*, which is traced by the instantaneous screw axes of the movement of a body. The instantaneous screw axis, or 'instantaneous helical axis' (IHA), is the axis of the helicoidal field generated by the velocities of every point in a moving body.

When a spatial displacement specializes to a planar displacement, the screw axis becomes the *displacement pole*, and the instantaneous screw axis becomes the *velocity pole*, or instantaneous center of rotation, also called an *instant center*. The term *centro* is also used for a velocity pole, and the locus of these points for a planar movement is called a centrode.^{[4]}

## HistoryEdit

The proof that a spatial displacement can be decomposed into a rotation and slide around and along a line in space is attributed to Michel Chasles in 1830.^{[5]} Recently the work of Gulio Mozzi has been identified as presenting a similar result in 1763.^{[6]}^{[7]}

## Screw axis symmetryEdit

A **screw displacement** (also **screw operation** or **rotary translation**) is the composition of a rotation by an angle *φ* about an axis (called the **screw axis**) with a translation by a distance *d* along this axis. A positive rotation direction usually means one that corresponds to the translation direction by the right-hand rule. Except for *φ* = 180°, we have to distinguish a screw displacement from its mirror image. Unlike for rotations, a righthand and lefthand screw operation generate different groups.

The combination of a rotation about an axis and a translation in a perpendicular direction is a rotation about a parallel axis. However, a screw operation with a nonzero translation vector along the axis cannot be reduced like that. Thus the effect of a rotation combined with *any* translation is a screw operation in the general sense, with as special cases a pure translation, a pure rotation and the identity. Together these are all the direct isometries in 3D.

In crystallography, a **screw axis symmetry** is a combination of rotation about an axis and a translation parallel to that axis which leaves a crystal unchanged. If *φ* = 360°/*n* for some positive integer *n*, then screw axis symmetry implies translational symmetry with a translation vector which is *n* times that of the screw disubscript. So, 6_{3} is a rotation of 60° combined with a translation of 1/2 of the lattice vector, implying that there is also 3-fold rotational symmetry about this axis. The possibilities are 2_{1}, 3_{1}, 4_{1}, 4_{2}, 6_{1}, 6_{2}, and 6_{3}, and the enantiomorphous 3_{2}, 4_{3}, 6_{4}, and 6_{5}.^{[8]}

A non-discrete screw axis isometry group contains all combinations of a rotation about some axis and a proportional translation along the axis (in rifling, the constant of proportionality is called the twist rate); in general this is combined with *k*-fold rotational isometries about the same axis (*k* ≥ 1); the set of images of a point under the isometries is a *k*-fold helix; in addition there may be a 2-fold rotation about a perpendicularly intersecting axis, and hence a *k*-fold helix of such axes.

## Screw axis of a spatial displacementEdit

### Geometric argumentEdit

Let *D* : **R**^{3} → **R**^{3} be an orientation-preserving rigid motion of **R**^{3}. The set of these transformations is a subgroup of Euclidean motions known as the special Euclidean group SE(3). These rigid motions are defined by transformations of **x** in **R**^{3} given by

consisting of a three-dimensional rotation *A* followed by a translation by the vector **d**.

A three-dimensional rotation *A* has a unique axis that defines a line *L*. Let the unit vector along this line be **S** so that the translation vector **d** can be resolved into a sum of two vectors, one parallel and one perpendicular to the axis *L*, that is,

In this case, the rigid motion takes the form

Now, the orientation preserving rigid motion *D** = *A*(**x**) + **d**_{⊥} transforms all the points of **R**^{3} so that they remain in planes perpendicular to *L*. For a rigid motion of this type there is a unique point **c** in the plane *P* perpendicular to *L* through **0**, such that

The point **C** can be calculated as

because **d**_{⊥} does not have a component in the direction of the axis of *A*.

A rigid motion *D** with a fixed point must be a rotation of around the axis *L*_{c} through the point **c**. Therefore, the rigid motion

consists of a rotation about the line *L*_{c} followed by a translation by the vector **d**_{L} in the direction of the line *L*_{c}.

Conclusion: every rigid motion of **R**^{3} is the result of a rotation of **R**^{3} about a line *L*_{c} followed by a translation in the direction of the line. The combination of a rotation about a line and translation along the line is called a screw motion.

### Computing a point on the screw axisEdit

A point **C** on the screw axis satisfies the equation:^{[9]}

Solve this equation for **C** using Cayley's formula for a rotation matrix

where [B] is the skew-symmetric matrix constructed from Rodrigues' vector

such that

Use this form of the rotation *A* to obtain

which becomes

This equation can be solved for **C** on the screw axis **P**(t) to obtain,

The screw axis **P**(t) = **C** + t**S** of this spatial displacement has the Plücker coordinates *S* = (**S**, **C** × **S**).^{[9]}

## Dual quaternionEdit

The screw axis appears in the dual quaternion formulation of a spatial displacement D = ([A], **d**). The dual quaternion is constructed from the dual vector S = (**S**, **V**) defining the screw axis and the dual angle (*φ*, *d*), where *φ* is the rotation about and *d* the slide along this axis, which defines the displacement D to obtain,

A spatial displacement of points **q** represented as a vector quaternion can be defined using quaternions as the mapping

where **d** is translation vector quaternion and *S* is a unit quaternion, also called a versor, given by

that defines a rotation by 2*θ* around an axis **S**.

In the proper Euclidean group E^{+}(3) a rotation may be conjugated with a translation to move it to a parallel rotation axis. Such a conjugation, using quaternion homographies, produces the appropriate screw axis to express the given spatial displacement as a screw displacement, in accord with Chasles’ theorem.

## MechanicsEdit

The motion of a rigid body may be the combination of rotation about an axis (the screw axis) and a translation along that axis. This screw move is characterized by the velocity vector for the translation and the angular velocity vector in the same or opposite direction. If these two vectors are constant and along one of the principal axes of the body, no external forces are needed for this motion (moving and spinning). As an example, if gravity and drag are ignored, this is the motion of a bullet fired from a rifled gun.

### BiomechanicsEdit

This parameter is often used in biomechanics, when describing the motion of joints of the body. For any period of time, joint motion can be seen as the movement of a single point on one articulating surface with respect to the adjacent surface (usually distal with respect to proximal). The total translation and rotations along the path of motion can be defined as the time integrals of the instantaneous translation and rotation velocities at the IHA for a given reference time.^{[10]}

In any single plane, the path formed by the locations of the moving instantaneous axis of rotation (IAR) is known as the 'centroid', and is used in the description of joint motion.

## See alsoEdit

- Corkscrew (roller coaster element)
- Euler's rotation theorem – rotations without translation
- Glide reflection
- Helical symmetry
- Line group
- Screw theory
- Space group

## ReferencesEdit

**^**Bottema, O, and B. Roth,*Theoretical Kinematics,*Dover Publications (September 1990), link to Google books**^**Hunt, K. H.,*Kinematic Geometry of Mechanism,*Oxford University Press, 1990**^**R.S. Ball, A Treatise on the Theory of Screws, Hodges, Dublin, 1876, Appendix 1, University Press, Cambridge, 1900, p. 510**^**Homer D. Eckhardt,*Kinematic Design of Machines and Mechanisms*, McGraw-Hill (1998) p. 63 ISBN 0-07-018953-6 on-line at Google books**^**M. Chasles, Note sur les Proprietes Generales du Systeme de Deux Corps Semblables entr'eux, Bullettin de Sciences Mathematiques, Astronomiques Physiques et Chimiques, Baron de Ferussac, Paris, 1830, pp. 321±326**^**G. Mozzi, Discorso matematico sopra il rotamento momentaneo dei corpi, Stamperia di Donato Campo, Napoli, 1763**^**M. Ceccarelli, Screw axis defined by Giulio Mozzi in 1763 and early studies on helicoidal motion, Mechanism and Machine Theory 35 (2000) 761-770**^**Walter Borchardt-Ott (1995).*Crystallography*. Springer-Verlag. ISBN 3-540-59478-7.- ^
^{a}^{b}J. M. McCarthy and G. S. Soh,*Geometric Design of Linkages*, 2nd Edition, Springer 2010 **^**Woltring HJ, de Lange A, Kauer JMG, Huiskes R. 1987 Instantaneous helical axes estimation via natural, cross-validated splines. In: Bergmann G, Kölbel R, Rohlmann A (Editors). Biomechanics: Basic and Applied Research. Springer, pp 121-128. full text