Perturbation theory (quantum mechanics)
This article needs additional citations for verification. (February 2020) (Learn how and when to remove this template message) 
In quantum mechanics, perturbation theory is a set of approximation schemes directly related to mathematical perturbation for describing a complicated quantum system in terms of a simpler one. The idea is to start with a simple system for which a mathematical solution is known, and add an additional "perturbing" Hamiltonian representing a weak disturbance to the system. If the disturbance is not too large, the various physical quantities associated with the perturbed system (e.g. its energy levels and eigenstates) can be expressed as "corrections" to those of the simple system. These corrections, being small compared to the size of the quantities themselves, can be calculated using approximate methods such as asymptotic series. The complicated system can therefore be studied based on knowledge of the simpler one. In effect, it is describing a complicated unsolved system using a simple, solved system.
Approximate HamiltoniansEdit
Perturbation theory is an important tool for describing real quantum systems, as it turns out to be very difficult to find exact solutions to the Schrödinger equation for Hamiltonians of even moderate complexity. The Hamiltonians to which we know exact solutions, such as the hydrogen atom, the quantum harmonic oscillator and the particle in a box, are too idealized to adequately describe most systems. Using perturbation theory, we can use the known solutions of these simple Hamiltonians to generate solutions for a range of more complicated systems.
Applying perturbation theoryEdit
Perturbation theory is applicable if the problem at hand cannot be solved exactly, but can be formulated by adding a "small" term to the mathematical description of the exactly solvable problem.
For example, by adding a perturbative electric potential to the quantum mechanical model of the hydrogen atom, tiny shifts in the spectral lines of hydrogen caused by the presence of an electric field (the Stark effect) can be calculated. This is only approximate because the sum of a Coulomb potential with a linear potential is unstable (has no true bound states) although the tunneling time (decay rate) is very long. This instability shows up as a broadening of the energy spectrum lines, which perturbation theory fails to reproduce entirely.
The expressions produced by perturbation theory are not exact, but they can lead to accurate results as long as the expansion parameter, say α, is very small. Typically, the results are expressed in terms of finite power series in α that seem to converge to the exact values when summed to higher order. After a certain order n ~ 1/α however, the results become increasingly worse since the series are usually divergent (being asymptotic series). There exist ways to convert them into convergent series, which can be evaluated for largeexpansion parameters, most efficiently by the variational method.
In the theory of quantum electrodynamics (QED), in which the electron–photon interaction is treated perturbatively, the calculation of the electron's magnetic moment has been found to agree with experiment to eleven decimal places.^{[1]} In QED and other quantum field theories, special calculation techniques known as Feynman diagrams are used to systematically sum the power series terms.
LimitationsEdit
Large perturbationsEdit
Under some circumstances, perturbation theory is an invalid approach to take. This happens when the system we wish to describe cannot be described by a small perturbation imposed on some simple system. In quantum chromodynamics, for instance, the interaction of quarks with the gluon field cannot be treated perturbatively at low energies because the coupling constant (the expansion parameter) becomes too large.^{[clarification needed]}
Nonadiabatic statesEdit
Perturbation theory also fails to describe states that are not generated adiabatically from the "free model", including bound states and various collective phenomena such as solitons.^{[citation needed]} Imagine, for example, that we have a system of free (i.e. noninteracting) particles, to which an attractive interaction is introduced. Depending on the form of the interaction, this may create an entirely new set of eigenstates corresponding to groups of particles bound to one another. An example of this phenomenon may be found in conventional superconductivity, in which the phononmediated attraction between conduction electrons leads to the formation of correlated electron pairs known as Cooper pairs. When faced with such systems, one usually turns to other approximation schemes, such as the variational method and the WKB approximation. This is because there is no analogue of a bound particle in the unperturbed model and the energy of a soliton typically goes as the inverse of the expansion parameter. However, if we "integrate" over the solitonic phenomena, the nonperturbative corrections in this case will be tiny; of the order of exp(−1/g) or exp(−1/g^{2}) in the perturbation parameter g. Perturbation theory can only detect solutions "close" to the unperturbed solution, even if there are other solutions for which the perturbative expansion is not valid.^{[citation needed]}
Difficult computationsEdit
The problem of nonperturbative systems has been somewhat alleviated by the advent of modern computers. It has become practical to obtain numerical nonperturbative solutions for certain problems, using methods such as density functional theory. These advances have been of particular benefit to the field of quantum chemistry.^{[2]} Computers have also been used to carry out perturbation theory calculations to extraordinarily high levels of precision, which has proven important in particle physics for generating theoretical results that can be compared with experiment.
Timeindependent perturbation theoryEdit
Timeindependent perturbation theory is one of two categories of perturbation theory, the other being timedependent perturbation (see next section). In timeindependent perturbation theory, the perturbation Hamiltonian is static (i.e., possesses no time dependence). Timeindependent perturbation theory was presented by Erwin Schrödinger in a 1926 paper,^{[3]} shortly after he produced his theories in wave mechanics. In this paper Schrödinger referred to earlier work of Lord Rayleigh,^{[4]} who investigated harmonic vibrations of a string perturbed by small inhomogeneities. This is why this perturbation theory is often referred to as Rayleigh–Schrödinger perturbation theory.^{[5]}
First order correctionsEdit
We begin^{[6]} with an unperturbed Hamiltonian H_{0}, which is also assumed to have no time dependence. It has known energy levels and eigenstates, arising from the timeindependent Schrödinger equation:
For simplicity, we have assumed that the energies are discrete. The (0) superscripts denote that these quantities are associated with the unperturbed system. Note the use of bra–ket notation.
We now introduce a perturbation to the Hamiltonian. Let V be a Hamiltonian representing a weak physical disturbance, such as a potential energy produced by an external field. (Thus, V is formally a Hermitian operator.) Let λ be a dimensionless parameter that can take on values ranging continuously from 0 (no perturbation) to 1 (the full perturbation). The perturbed Hamiltonian is
The energy levels and eigenstates of the perturbed Hamiltonian are again given by the Schrödinger equation,
Our goal is to express E_{n} and in terms of the energy levels and eigenstates of the old Hamiltonian. If the perturbation is sufficiently weak, we can write them as a (Maclaurin) power series in λ,
where
When k = 0, these reduce to the unperturbed values, which are the first term in each series. Since the perturbation is weak, the energy levels and eigenstates should not deviate too much from their unperturbed values, and the terms should rapidly become smaller as we go to higher order.
Substituting the power series expansion into the Schrödinger equation, we obtain
Expanding this equation and comparing coefficients of each power of λ results in an infinite series of simultaneous equations. The zerothorder equation is simply the Schrödinger equation for the unperturbed system.
The firstorder equation is
Operating through by , the first term on the lefthand side cancels the first term on the righthand side. (Recall, the unperturbed Hamiltonian is Hermitian). This leads to the firstorder energy shift,
This is simply the expectation value of the perturbation Hamiltonian while the system is in the unperturbed state.
This result can be interpreted in the following way: suppose the perturbation is applied, but we keep the system in the quantum state , which is a valid quantum state though no longer an energy eigenstate. The perturbation causes the average energy of this state to increase by . However, the true energy shift is slightly different, because the perturbed eigenstate is not exactly the same as . These further shifts are given by the second and higher order corrections to the energy.
Before we compute the corrections to the energy eigenstate, we need to address the issue of normalization. We may suppose
but perturbation theory assumes we also have .
It follows that at first order in λ, we must have
Since the overall phase is not determined in quantum mechanics, without loss of generality, in time independent theory we may assume is purely real. Therefore,
leading to
To obtain the firstorder correction to the energy eigenstate, we insert our expression for the firstorder energy correction back into the result shown above equating the firstorder coefficients of λ. We then make use of the resolution of the identity,
where the are in the orthogonal complement of .
The firstorder equation may thus be expressed as
For the moment, suppose that the zerothorder energy level is not degenerate, i.e. there is no eigenstate of H_{0} in the orthogonal complement of with the energy . After renaming the summation dummy index above as , we can pick any , and multiply through by giving
We see that the above also gives us the component of the firstorder correction along .
Thus, in total, we get,
The firstorder change in the nth energy eigenket has a contribution from each of the energy eigenstates k ≠ n. Each term is proportional to the matrix element , which is a measure of how much the perturbation mixes eigenstate n with eigenstate k; it is also inversely proportional to the energy difference between eigenstates k and n, which means that the perturbation deforms the eigenstate to a greater extent if there are more eigenstates at nearby energies. We see also that the expression is singular if any of these states have the same energy as state n, which is why we assumed that there is no degeneracy.
Secondorder and higher correctionsEdit
We can find the higherorder deviations by a similar procedure, though the calculations become quite tedious with our current formulation. Our normalization prescription gives that
Up to second order, the expressions for the energies and (normalized) eigenstates are:
Extending the process further, the thirdorder energy correction can be shown to be ^{[7]}
If we introduce the notation,
 ,
 ,
then the energy corrections to fifth order can be written
and the states to fourth order can be written
All terms involved k_{j} should be summed over k_{j} such that the denominator does not vanish.
Effects of degeneracyEdit
Suppose that two or more energy eigenstates are degenerate. The firstorder energy shift is not well defined, since there is no unique way to choose a basis of eigenstates for the unperturbed system. The various eigenstates for a given energy will perturb with different energies, or may well possess no continuous family of perturbations at all.
This is manifested in the calculation of the perturbed eigenstate via the fact that the operator
does not have a welldefined inverse.
Let D denote the subspace spanned by these degenerate eigenstates. No matter how small the perturbation is, in the degenerate subspace D the energy differences between the eigenstates of H are nonzero, so complete mixing of at least some of these states is assured. Typically, the eigenvalues will split, and the eigenspaces will become simple (onedimensional), or at least of smaller dimension than D.
The successful perturbations will not be "small" relative to a poorly chosen basis of D. Instead, we consider the perturbation "small" if the new eigenstate is close to the subspace D. The new Hamiltonian must be diagonalized in D, or a slight variation of D, so to speak. These perturbed eigenstates in D are now the basis for the perturbation expansion,
For the firstorder perturbation, we need solve the perturbed Hamiltonian restricted to the degenerate subspace D,
simultaneously for all the degenerate eigenstates, where are firstorder corrections to the degenerate energy levels, and "small" is a vector of orthogonal to D. This amounts to diagonalizing the matrix
This procedure is approximate, since we neglected states outside the D subspace ("small"). The splitting of degenerate energies is generally observed. Although the splitting may be small, , compared to the range of energies found in the system, it is crucial in understanding certain details, such as spectral lines in Electron Spin Resonance experiments.
Higherorder corrections due to other eigenstates outside D can be found in the same way as for the nondegenerate case,
The operator on the lefthand side is not singular when applied to eigenstates outside D, so we can write
but the effect on the degenerate states is of .
Neardegenerate states should also be treated similarly, when the original Hamiltonian splits aren't larger than the perturbation in the neardegenerate subspace. An application is found in the nearly free electron model, where neardegeneracy, treated properly, gives rise to an energy gap even for small perturbations. Other eigenstates will only shift the absolute energy of all neardegenerate states simultaneously.
Generalization to multiparameter caseEdit
The generalization of the timeindependent perturbation theory to the case where there are multiple small parameters in place of λ can be formulated more systematically using the language of differential geometry, which basically defines the derivatives of the quantum states and calculates the perturbative corrections by taking derivatives iteratively at the unperturbed point.
Hamiltonian and force operatorEdit
From the differential geometric point of view, a parameterized Hamiltonian is considered as a function defined on the parameter manifold that maps each particular set of parameters to an Hermitian operator H(x^{ μ}) that acts on the Hilbert space. The parameters here can be external field, interaction strength, or driving parameters in the quantum phase transition. Let E_{n}(x^{ μ}) and be the nth eigenenergy and eigenstate of H(x^{ μ}) respectively. In the language of differential geometry, the states form a vector bundle over the parameter manifold, on which derivatives of these states can be defined. The perturbation theory is to answer the following question: given and at an unperturbed reference point , how to estimate the E_{n}(x^{ μ}) and at x^{ μ} close to that reference point.
Without loss of generality, the coordinate system can be shifted, such that the reference point is set to be the origin. The following linearly parameterized Hamiltonian is frequently used
If the parameters x^{ μ} are considered as generalized coordinates, then F_{μ} should be identified as the generalized force operators related to those coordinates. Different indices μ label the different forces along different directions in the parameter manifold. For example, if x^{ μ} denotes the external magnetic field in the μdirection, then F_{μ} should be the magnetization in the same direction.
Perturbation theory as power series expansionEdit
The validity of the perturbation theory lies on the adiabatic assumption, which assumes the eigenenergies and eigenstates of the Hamiltonian are smooth functions of parameters such that their values in the vicinity region can be calculated in power series (like Taylor expansion) of the parameters:
Here ∂_{μ} denotes the derivative with respect to x^{ μ}. When applying to the state , it should be understood as the covariant derivative if the vector bundle is equipped with nonvanishing connection. All the terms on the righthandside of the series are evaluated at x^{ μ} = 0, e.g. E_{n} ≡ E_{n}(0) and . This convention will be adopted throughout this subsection, that all functions without the parameter dependence explicitly stated are assumed to be evaluated at the origin. The power series may converge slowly or even not converge when the energy levels are close to each other. The adiabatic assumption breaks down when there is energy level degeneracy, and hence the perturbation theory is not applicable in that case.
Hellmann–Feynman theoremsEdit
The above power series expansion can be readily evaluated if there is a systematic approach to calculate the derivates to any order. Using the chain rule, the derivatives can be broken down to the single derivative on either the energy or the state. The Hellmann–Feynman theorems are used to calculate these single derivatives. The first Hellmann–Feynman theorem gives the derivative of the energy,
The second Hellmann–Feynman theorem gives the derivative of the state (resolved by the complete basis with m ≠ n),
For the linearly parameterized Hamiltonian, ∂_{μ}H simply stands for the generalized force operator F_{μ}.
The theorems can be simply derived by applying the differential operator ∂_{μ} to both sides of the Schrödinger equation which reads
Then overlap with the state from left and make use of the Schrödinger equation again,
Given that the eigenstates of the Hamiltonian always form an orthonormal basis , the cases of m = n and m ≠ n can be discussed separately. The first case will lead to the first theorem and the second case to the second theorem, which can be shown immediately by rearranging the terms. With the differential rules given by the Hellmann–Feynman theorems, the perturbative correction to the energies and states can be calculated systematically.
Correction of energy and stateEdit
To the second order, the energy correction reads
where denotes the real part function. The first order derivative ∂_{μ}E_{n} is given by the first Hellmann–Feynman theorem directly. To obtain the second order derivative ∂_{μ}∂_{ν}E_{n}, simply applying the differential operator ∂_{μ} to the result of the first order derivative , which reads
Note that for linearly parameterized Hamiltonian, there is no second derivative ∂_{μ}∂_{ν}H = 0 on the operator level. Resolve the derivative of state by inserting the complete set of basis,
then all parts can be calculated using the Hellmann–Feynman theorems. In terms of Lie derivatives, according to the definition of the connection for the vector bundle. Therefore, the case m = n can be excluded from the summation, which avoids the singularity of the energy denominator. The same procedure can be carried on for higher order derivatives, from which higher order corrections are obtained.
The same computational scheme is applicable for the correction of states. The result to the second order is as follows
Both energy derivatives and state derivatives will be involved in deduction. Whenever a state derivative is encountered, resolve it by inserting the complete set of basis, then the HellmannFeynman theorem is applicable. Because differentiation can be calculated systematically, the series expansion approach to the perturbative corrections can be coded on computers with symbolic processing software like Mathematica.
Effective HamiltonianEdit
Let H(0) be the Hamiltonian completely restricted either in the lowenergy subspace or in the highenergy subspace , such that there is no matrix element in H(0) connecting the low and the highenergy subspaces, i.e. if . Let F_{μ} = ∂_{μ}H be the coupling terms connecting the subspaces. Then when the high energy degrees of freedoms are integrated out, the effective Hamiltonian in the low energy subspace reads^{[8]}
Here are restricted in the low energy subspace. The above result can be derived by power series expansion of .
In a formal way it is possible to define an effective Hamiltonian that gives exactly the lowlying energy states and wavefunctions.^{[9]} In practice, some kind of approximation (perturbation theory) is generally required.
Timedependent perturbation theoryEdit
Method of variation of constantsEdit
Timedependent perturbation theory, developed by Paul Dirac, studies the effect of a timedependent perturbation V(t) applied to a timeindependent Hamiltonian H_{0}.^{[10]}
Since the perturbed Hamiltonian is timedependent, so are its energy levels and eigenstates. Thus, the goals of timedependent perturbation theory are slightly different from timeindependent perturbation theory. One is interested in the following quantities:
 The timedependent expectation value of some observable A, for a given initial state.
 The timedependent amplitudes^{[clarification needed]} of those quantum states that are energy eigenkets (eigenvectors) in the unperturbed system.
The first quantity is important because it gives rise to the classical result of an A measurement performed on a macroscopic number of copies of the perturbed system. For example, we could take A to be the displacement in the xdirection of the electron in a hydrogen atom, in which case the expected value, when multiplied by an appropriate coefficient, gives the timedependent dielectric polarization of a hydrogen gas. With an appropriate choice of perturbation (i.e. an oscillating electric potential), this allows one to calculate the AC permittivity of the gas.
The second quantity looks at the timedependent probability of occupation for each eigenstate. This is particularly useful in laser physics, where one is interested in the populations of different atomic states in a gas when a timedependent electric field is applied. These probabilities are also useful for calculating the "quantum broadening" of spectral lines (see line broadening) and particle decay in particle physics and nuclear physics.
We will briefly examine the method behind Dirac's formulation of timedependent perturbation theory. Choose an energy basis for the unperturbed system. (We drop the (0) superscripts for the eigenstates, because it is not useful to speak of energy levels and eigenstates for the perturbed system.)
If the unperturbed system is an eigenstate (of the Hamiltonian) at time t = 0, its state at subsequent times varies only by a phase (in the Schrödinger picture, where state vectors evolve in time and operators are constant),
Now, introduce a timedependent perturbing Hamiltonian V(t). The Hamiltonian of the perturbed system is
Let denote the quantum state of the perturbed system at time t. It obeys the timedependent Schrödinger equation,
The quantum state at each instant can be expressed as a linear combination of the complete eigenbasis of :

(1)
where the c_{n}(t)s are to be determined complex functions of t which we will refer to as amplitudes (strictly speaking, they are the amplitudes in the Dirac picture).
We have explicitly extracted the exponential phase factors on the right hand side. This is only a matter of convention, and may be done without loss of generality. The reason we go to this trouble is that when the system starts in the state and no perturbation is present, the amplitudes have the convenient property that, for all t, c_{j}(t) = 1 and c_{n}(t) = 0 if n ≠ j.
The square of the absolute amplitude c_{n}(t) is the probability that the system is in state n at time t, since
Plugging into the Schrödinger equation and using the fact that ∂/∂t acts by a product rule, one obtains
By resolving the identity in front of V and multiplying through by the bra on the left, this can be reduced to a set of coupled differential equations for the amplitudes,
where we have used equation (1) to evaluate the sum on n in the second term, then used the fact that .
The matrix elements of V play a similar role as in timeindependent perturbation theory, being proportional to the rate at which amplitudes are shifted between states. Note, however, that the direction of the shift is modified by the exponential phase factor. Over times much longer than the energy difference E_{k} − E_{n}, the phase winds around 0 several times. If the timedependence of V is sufficiently slow, this may cause the state amplitudes to oscillate. ( E.g., such oscillations are useful for managing radiative transitions in a laser.)
Up to this point, we have made no approximations, so this set of differential equations is exact. By supplying appropriate initial values c_{n}(t), we could in principle find an exact (i.e., nonperturbative) solution. This is easily done when there are only two energy levels (n = 1, 2), and this solution is useful for modelling systems like the ammonia molecule.
However, exact solutions are difficult to find when there are many energy levels, and one instead looks for perturbative solutions. These may be obtained by expressing the equations in an integral form,
Repeatedly substituting this expression for c_{n} back into right hand side, yields an iterative solution,
where, for example, the firstorder term is
Several further results follow from this, such as Fermi's golden rule, which relates the rate of transitions between quantum states to the density of states at particular energies; or the Dyson series, obtained by applying the iterative method to the time evolution operator, which is one of the starting points for the method of Feynman diagrams.
Method of Dyson seriesEdit
Timedependent perturbations can be reorganized through the technique of the Dyson series. The Schrödinger equation
has the formal solution
where T is the time ordering operator,
Thus, the exponential represents the following Dyson series,
Note that in the second term, the 1/2! factor exactly cancels the double contribution due to the timeordering operator, etc.
Consider the following perturbation problem
assuming that the parameter λ is small and that the problem has been solved.
Perform the following unitary transformation to the interaction picture (or Dirac picture),
Consequently, the Schrödinger equation simplifies to
so it is solved through the above Dyson series,
as a perturbation series with small λ.
Using the solution of the unperturbed problem and (for the sake of simplicity assume a pure discrete spectrum), yields, to first order,
Thus, the system, initially in the unperturbed state , by dint of the perturbation can go into the state . The corresponding transition probability amplitude to first order is
as detailed in the previous section——while the corresponding transition probability to a continuum is furnished by Fermi's golden rule.
As an aside, note that timeindependent perturbation theory is also organized inside this timedependent perturbation theory Dyson series. To see this, write the unitary evolution operator, obtained from the above Dyson series, as
and take the perturbation V to be timeindependent.
Using the identity resolution
with for a pure discrete spectrum, write
It is evident that, at second order, one must sum on all the intermediate states. Assume and the asymptotic limit of larger times. This means that, at each contribution of the perturbation series, one has to add a multiplicative factor in the integrands for ε arbitrarily small. Thus the limit t → ∞ gives back the final state of the system by eliminating all oscillating terms, but keeping the secular ones. The integrals are thus computable, and, separating the diagonal terms from the others yields
where the time secular series yields the eigenvalues of the perturbed problem specified above, recursively; whereas the remaining timeconstant part yields the corrections to the stationary eigenfunctions also given above ( .)
The unitary evolution operator is applicable to arbitrary eigenstates of the unperturbed problem and, in this case, yields a secular series that holds at small times.
Strong perturbation theoryEdit
In a similar way as for small perturbations, it is possible to develop a strong perturbation theory. Consider as usual the Schrödinger equation
and we consider the question if a dual Dyson series exists that applies in the limit of a perturbation increasingly large. This question can be answered in an affirmative way ^{[11]} and the series is the wellknown adiabatic series.^{[12]} This approach is quite general and can be shown in the following way. Consider the perturbation problem
being λ→ ∞. Our aim is to find a solution in the form
but a direct substitution into the above equation fails to produce useful results. This situation can be adjusted making a rescaling of the time variable as producing the following meaningful equations
that can be solved once we know the solution of the leading order equation. But we know that in this case we can use the adiabatic approximation. When does not depend on time one gets the WignerKirkwood series that is often used in statistical mechanics. Indeed, in this case we introduce the unitary transformation
that defines a free picture as we are trying to eliminate the interaction term. Now, in dual way with respect to the small perturbations, we have to solve the Schrödinger equation
and we see that the expansion parameter λ appears only into the exponential and so, the corresponding Dyson series, a dual Dyson series, is meaningful at large λs and is
After the rescaling in time we can see that this is indeed a series in justifying in this way the name of dual Dyson series. The reason is that we have obtained this series simply interchanging H_{0} and V and we can go from one to another applying this exchange. This is called duality principle in perturbation theory. The choice yields, as already said, a WignerKirkwood series that is a gradient expansion. The WignerKirkwood series is a semiclassical series with eigenvalues given exactly as for WKB approximation.^{[13]}
ExamplesEdit
Example of first order perturbation theory – ground state energy of the quartic oscillatorEdit
Consider the quantum harmonic oscillator with the quartic potential perturbation and the Hamiltonian
The ground state of the harmonic oscillator is
( ) and the energy of unperturbed ground state is
Using the first order correction formula we get
or
Example of first and second order perturbation theory – quantum pendulumEdit
Consider the quantum mathematical pendulum with the Hamiltonian
with the potential energy taken as the perturbation i.e.
The unperturbed normalized quantum wave functions are those of the rigid rotor and are given by
and the energies
The first order energy correction to the rotor due to the potential energy is
Using the formula for the second order correction one gets
or
or
ApplicationsEdit
ReferencesEdit
 ^ Aoyama, Tatsumi; Hayakawa, Masashi; Kinoshita, Toichiro; Nio, Makiko (2012). "Tenthorder QED lepton anomalous magnetic moment: Eighthorder vertices containing a secondorder vacuum polarization". Physical Review D. 85 (3): 033007. arXiv:1110.2826. Bibcode:2012PhRvD..85c3007A. doi:10.1103/PhysRevD.85.033007.
 ^ van Mourik, T.; Buhl, M.; Gaigeot, M.P. (10 February 2014). "Density functional theory across chemistry, physics and biology". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 372 (2011): 20120488. doi:10.1098/rsta.2012.0488. PMC 3928866. PMID 24516181.
 ^ Schrödinger, E. (1926). "Quantisierung als Eigenwertproblem" [Quantification of the eigen value problem]. Annalen der Physik (in German). 80 (13): 437–490. Bibcode:1926AnP...385..437S. doi:10.1002/andp.19263851302.
 ^ Rayleigh, J. W. S. (1894). Theory of Sound. I (2nd ed.). London: Macmillan. pp. 115–118. ISBN 9781152060234.
 ^ Sulejmanpasic, Tin; Ünsal, Mithat (20180701). "Aspects of perturbation theory in quantum mechanics: The BenderWuMathematica® package". Computer Physics Communications. 228: 273–289. doi:10.1016/j.cpc.2017.11.018. ISSN 00104655.
 ^ Sakurai, J.J., and Napolitano, J. (1964,2011). Modern quantum mechanics (2nd ed.), Addison Wesley ISBN 9780805382914. Chapter 5
 ^ Landau, L. D.; Lifschitz, E. M. (1977). Quantum Mechanics: Nonrelativistic Theory (3rd ed.). ISBN 9780080190129.
 ^ Bir, Gennadiĭ Levikovich; Pikus, Grigoriĭ Ezekielevich (1974). "Chapter 15: Perturbation theory for the degenerate case". Symmetry and Straininduced Effects in Semiconductors. ISBN 9780470073216.
 ^ Soliverez, Carlos E. (1981). "General Theory of Effective Hamiltonians". Physical Review A. 24 (1): 4–9. Bibcode:1981PhRvA..24....4S. doi:10.1103/PhysRevA.24.4 – via Academia.Edu.
 ^ Albert Messiah (1966). Quantum Mechanics, North Holland, John Wiley & Sons. ISBN 0486409244; J. J. Sakurai (1994). Modern Quantum Mechanics (AddisonWesley) ISBN 9780201539295.
 ^ Frasca, M. (1998). "Duality in Perturbation Theory and the Quantum Adiabatic Approximation". Physical Review A. 58 (5): 3439–3442. arXiv:hepth/9801069. Bibcode:1998PhRvA..58.3439F. doi:10.1103/PhysRevA.58.3439.
 ^ Mostafazadeh, A. (1997). "Quantum adiabatic approximation and the geometric phase". Physical Review A. 55 (3): 1653–1664. arXiv:hepth/9606053. Bibcode:1997PhRvA..55.1653M. doi:10.1103/PhysRevA.55.1653.
 ^ Frasca, Marco (2007). "A strongly perturbed quantum system is a semiclassical system". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 463 (2085): 2195–2200. arXiv:hepth/0603182. Bibcode:2007RSPSA.463.2195F. doi:10.1098/rspa.2007.1879.
External linksEdit
Wikiquote has quotations related to: Perturbation theory (quantum mechanics) 
 "L1.1 General problem. Nondegenerate perturbation theory". YouTube. MIT OpenCourseWare. 14 February 2019. (lecture by Barton Zwiebach)
 "L1.2 Setting up the perturbative equations". YouTube. MIT OpenCourseWare. 14 February 2019.