Parkerizing is a method of protecting a steel surface from corrosion and increasing its resistance to wear through the application of a chemical phosphate conversion coating. Parkerizing is usually considered to be an improved zinc or manganese phosphating process, and not to be an improved iron phosphating process, although some use the term parkerizing as a generic term for applying phosphating (or phosphatizing) coatings that does include the iron phosphating process. Bonderizing, phosphating, and phosphatizing are other terms associated with the Parkerizing process.
Parkerizing is commonly used on firearms as a more effective alternative to bluing, which is an earlier-developed chemical conversion coating. It is also used extensively on automobiles to protect unfinished metal parts from corrosion.
The Parkerizing process cannot be used on non-ferrous metals such as aluminium, brass, or copper. It similarly cannot be applied to steels containing a large amount of nickel, or on stainless steel. Passivation can be used for protecting other metals.
The process involves submerging the metal part into a phosphoric acid solution whose key ingredient is often zinc or manganese, with varying additional amounts of nitrates, chlorates, and copper. In one of the many processes that have been developed, the solution is heated to a temperature of 88–99 °C (190–210 °F) for a period ranging between 5 and 45 minutes. A stream of small hydrogen bubbles is emitted from the metal part as the process takes place; when the bubbling stops, the process is complete. In addition to this particular processing temperature, there have also been various similar Parkerizing processes developed and patented that permit using either lower temperatures (for energy efficiency) or higher temperatures (for faster processing).
The Parkerizing reaction equation in a metal-phosphate-solution is as follows:
Appearance and useEdit
Zinc phosphating results in a non-reflective, light- to medium-gray finish. Manganese phosphating produces a medium- to dark-gray or black finish. Iron phosphating produces a black or dark gray finish similar to manganese phosphating. The grain size of the zinc phosphating is usually the smallest among the three processes, providing a more appealing cosmetic appearance in many applications. Some Parkerized guns, particularly of WWII vintage, have almost olive drab green color. This was caused by contaminants in the acid solution and not cosmoline as is commonly believed.
Manganese and iron phosphate coatings are usually the thickest chemical conversion coatings, being thicker than other chemical conversion coatings such as zinc phosphate and bluing.
As for other chemical conversion coatings, the Parkerized surface must be completely covered with a light coating of oil to maximize corrosion and wear resistance, primarily through reducing wetting action and galvanic action. A heavy oil coating is unnecessary and undesirable for achieving a positive grip on Parkerized metal parts.
Development of the process was started in England and continued by the Parker family in the United States. The terms Parkerizing, Parkerize, and Parkerized are all technically registered U.S. trademarks of Henkel Adhesives Technologies, although the terminology has largely passed into generic use for many years. The process was first used on a large scale in the manufacture of firearms for the United States military during World War II.
The earliest work on phosphating processes was developed by British inventors William Alexander Ross, British patent 3119, in 1869, and by Thomas Watts Coslett, British patent 8667, in 1906. Coslett, of Birmingham, England, subsequently filed a patent based on this same process in America in 1907, which was granted U.S. Patent 870,937 in 1907. It essentially provided an iron phosphating process, using phosphoric acid.
An improved patent application for manganese phosphating based in large part on this early British iron phosphating process was filed in the US in 1912, and issued in 1913 to Frank Rupert Granville Richards as U.S. Patent 1,069,903.
Clark W. Parker acquired the rights to Coslett's and Richards' U.S. patents, and experimented in the family kitchen with these and other rust-resisting formulations. The ultimate result was that Clark W. Parker, along with his son Wyman C. Parker, working together, set up the Parker Rust-Proof Phosphating Company of America in 1915.
R. D. Colquhoun of the Parker Rust-Proof Phosphating Company of America then filed another improved phosphating patent application in 1919. This patent was issued in 1919 as U.S. Patent 1,311,319, for an improved manganese phosphating (Parkerizing) technique.
Similarly, Baker and Dingman of the Parker Rust-Proof Company filed an improved manganese phosphating (Parkerizing) process patent in 1928 that reduced the processing time to 1⁄3 of the original time that had been required through heating the solution to a temperature in the precisely controlled range of 500 to 550 °F (260 to 288 °C). This patent was issued as U.S. Patent 1,761,186 in 1930.
Manganese phosphating, even with these process improvements, still required the use of expensive and difficult-to-obtain manganese compounds. Subsequently, an alternative technique was developed by the Parker Company to use easier-to-obtain compounds at less expense through using zinc phosphating in place of manganese phosphating. The patent for this zinc phosphating process (using strategic compounds that would remain available in America during a war) was granted to inventor Romig of the American Chemical Paint Company in 1938 as U.S. Patent 2,132,883, just prior to the loss of easy access to manganese compounds that occurred during World War II.
Somewhat analogous to the improved manganese phosphating process improvements discovered by Baker and Dingman, a similarly improved method was found for an improved zinc phosphating process as well. This improvement was discovered by Darsey of the Parker Rust Proof Company, who filed a patent in February 1941, which was granted in August 1942, U.S. Patent 2,293,716, that improved upon the zinc phosphatizing (Parkerizing) process further. He discovered that adding copper reduced the acidity requirement over what had been required, and that also adding a chlorate to the nitrates that were already used would additionally permit running the process at a much lower temperature in the range of 115 to 130 °F (46 to 54 °C), reducing the cost of running the process further. With these process improvements, the end result was that a low-temperature (energy-efficient) zinc phosphating (Parkerizing) process, using strategic materials to which the United States had ready access, became the most common phosphating process used during World War II to protect American war materials such as firearms and planes from rust and corrosion.
Glock Ges.m.b.H., an Austrian firearms manufacturer, uses a black Parkerizing process as a topcoat to a Tenifer process to protect the slides of the pistols they manufacture. After applying the Tenifer process, a black Parkerized finish is applied and the slide is protected even if the Parkerized finish were to wear off. Used this way, Parkerizing is thus becoming a protective and decorative finishing technique that is used over other underlying improved techniques of metal protection.
Traditional iron phosphate, zinc phosphate, and manganese phosphate chemical conversion coatings, including Parkerizing variations, have all been criticized in recent years for introducing phosphates into surface water systems, encouraging the rapid growth of algae (eutrophication). As a result, in recent years, new, emerging technology alternatives to traditional phosphate coatings have started to see limited use, for replacing all phosphating coatings, including Parkerizing. The majority of these newer conversion coatings are fluorozirconium-based. The most popular of these fluorozirconium-based conversion coatings, introduced in 2005, incorporates the transition metal vanadium. This new, more environmentally friendly coating is referred to as a vanadate conversion coating. Besides vanadate coatings, arsenate coatings may theoretically provide similar protection, at the risk of being a health hazard to humans and animals. It remains to be seen if these, or other new chemical conversion coatings, will ultimately replace traditional phosphating and Parkerizing.
Various of similar recipes for stovetop kitchen Parkerizing circulate in gun publications at times, and Parkerizing kits are sold by major gun-parts distributors such as Brownells.
- "Just The Facts". Calvan.com. Retrieved April 12, 2014.
- U.S. Environmental Protection Agency Recommendations
- MIL-HDBK-205, Phosphate & Black Oxide Coating of Ferrous Metals: a standard overview on phosphate and black oxide (bluing) coatings
- Budinski, Kenneth G. (1988), Surface Engineering for Wear Resistance, Englewood Cliffs, New Jersey: Prentice Hall, p. 48
- Brimi, Marjorie A. (1965), Electrofinishing, New York, New York: American Elsevier Publishing Company, Inc., pp. 62–63.
- Henkel Surface Technologies—Current owner of Parco-Lubrite (a manganese phosphating process) and other Parkerizing rust-prevention coatings. (Parco is a registered trademark of Henkel Surface Technologies.)
- Coral Chemical Company—Current owner of Coral Eco Treat (vanadium conversion coating process)
- Parker Rust-Proof of Cleveland—Last remaining of the four original job shop licensees of Parker Chemical, currently offers phosphating services