Monotyping is a type of printmaking made by drawing or painting on a smooth, non-absorbent surface. The surface, or matrix, was historically a copper etching plate, but in contemporary work it can vary from zinc or glass to acrylic glass. The image is then transferred onto a sheet of paper by pressing the two together, usually using a printing-press. Monotypes can also be created by inking an entire surface and then, using brushes or rags, removing ink to create a subtractive image, e.g. creating lights from a field of opaque colour. The inks used may be oil based or water based. With oil based inks, the paper may be dry, in which case the image has more contrast, or the paper may be damp, in which case the image has a 10 percent greater range of tones.
Monotyping produces a unique print, or monotype; most of the ink is removed during the initial pressing. Although subsequent reprintings are sometimes possible, they differ greatly from the first print and are generally considered inferior. These prints from the original plate are called "ghost prints." A print made by pressing a new print onto another surface, effectively making the print into a plate, is called a "cognate". Stencils, watercolor, solvents, brushes, and other tools are often used to embellish a monotype print. Monotypes can be spontaneously executed and with no previous sketch.
There is still no certainty as to who was the inventor of the monotype process. The Italian artist Giovanni Benedetto Castiglione (1609–64) is often credited as being the first artist to produce monotypes. He made brushed sketches intended as finished and final works of art. He began to make monotypes in the mid 1640s, normally working from black to white, and produced over twenty surviving ones, over half of which are set at night. It is believed that the Flemish artist Antoon Sallaert created his first monotypes in the early 1640s and is therefore to be regarded as the inventor of this printing process. Both artists used the new technique in different ways. Castiglione created most of his monotypes as black-field images by wiping away ink on a prepared plate thus producing white and grey lines. Sallaert, on the other hand, brushed bold, tapering lines onto the printing surface with meticulous precision. It is likely that Sallaert's monotype style was influenced by the chiaroscuro woodcuts of the Dutch engraver Hendrik Goltzius. Sallaert found in the monotype a technique which was the closest to drawing and oil sketching. His monotypes and drawings are characterised by swelling lines and tapering ends. He often added by hand white highlights to his monotypes. Sallaert clearly appreciated in the monotype technique the freedom to design on a plate before printing it on paper.
William Blake developed a different technique, painting on millboard in egg tempera to produce both new works and coloured impressions of his prints and book illustrations, including his Pity. Each impression was usually then worked over by hand, using ink and watercolour. Few other artists used the technique until Degas, who made several, often working on them further after printing (Beside the Sea, 1876-7); Pissarro also made several. Paul Gauguin used a variant technique involving tracing, later taken up by Paul Klee. In the twentieth century the technique became more popular, such as the extraordinary colorful monotypes created by Marc Chagall in the 1960s.
Comparing monotypes to monoprintsEdit
Historically, the terms monotype and monoprint were often used interchangeably. More recently, however, they have come to refer to two different, though similar, types of printmaking. Both involve the transfer of ink from a plate to the paper, canvas, or other surface that will ultimately hold the work of art. In the case of monotypes, the plate is a featureless plate. It contains no features that will impart any definition to successive prints. The most common feature would be the etched or engraved line on a metal plate. In the absence of any permanent features on the surface of the plate, all articulation of imagery is dependent on one unique inking, resulting in one unique print. Additionally, the term monotype is often used for an image made by inking a non-absorbent surface with a solid colour, laying over it a piece of paper and drawing onto the back of the paper. When the paper is pulled off the resulting print consists of the line surrounded by ink picked up from the inked plate. The result has a chance element, often random and irregular which gives the print a certain charm, a technique famously used by British artist Tracey Emin, a graduate of the Royal College of Art, where the practice of monoprinting in general was regarded as "fake painting".
Monoprints, on the other hand, now refers to the results of plates that have permanent features on them. Monoprints can be thought of as variations on a theme, with the theme resulting from some permanent features being found on the plate—lines, textures—that persist from print to print. Variations are confined to those resulting from how the plate is inked prior to each print. The variations are endless, but certain permanent features on the plate will tend to persist from one print to the next.
- Prints and Printmaking, Antony Griffiths, British Museum Press (in UK), 2nd ed., 1996 ISBN 0-7141-2608-X
- Todd D. Weyman, Two Early Monotypes by Sallaert, in: Print Quarterly Vol. 12, No. 2 (JUNE 1995), p. 164-169
- M. Royalton Kisch, A Monotype by Sallaert, in: Print Quarterly, 1988, V, n. 1, p. 60-61
- Kelley Notaro, An Exhibition of the Finest Monotypes from the Cleveland Museum of Art's Collection at The Cleveland Museum of Art site
- Marc Chagall Monotypes, Gerald Cramer, Editor, Geneva 1966
- Singular impressions: the monotype in America. Joann Moser. Smithsonian Institution Press, 1997.
- Media related to Monotypes at Wikimedia Commons
- Video explaining the monotype process
- Prints & People: A Social History of Printed Pictures, an exhibition catalog from The Metropolitan Museum of Art (fully available online as PDF), which contains material on monotyping