Iron(III) oxide or ferric oxide is the inorganic compound with the formula Fe2O3. It is one of the three main oxides of iron, the other two being iron(II) oxide (FeO), which is rare; and iron(II,III) oxide (Fe3O4), which also occurs naturally as the mineral magnetite. As the mineral known as hematite, Fe2O3 is the main source of iron for the steel industry. Fe2O3 is readily attacked by acids. Iron(III) oxide is often called rust, and to some extent this label is useful, because rust shares several properties and has a similar composition. To a chemist, rust is considered an ill-defined material, described as hydrated ferric oxide.
3D model (JSmol)
|E number||E172(ii) (colours)|
CompTox Dashboard (EPA)
|Molar mass||159.687 g·mol−1|
|Melting point|| 1,539 °C (2,802 °F; 1,812 K)|
105 °C (221 °F; 378 K)
150 °C (302 °F; 423 K)
50 °C (122 °F; 323 K)
92 °C (198 °F; 365 K)
|Solubility||Soluble in diluted acids, sugar solution|
Trihydrate slightly soluble in aq. tartaric acid, citric acid, CH3COOH
Refractive index (nD)
|n1=2.91, n2=3.19 (α, hematite)|
|Rhombohedral, hR30 (α-form)|
Cubic bixbyite, cI80 (β-form)
Cubic spinel (γ-form)
|R3c, No. 161 (α-form)|
Ia3, No. 206 (β-form)
Pna21, No. 33 (ε-form)
2/m 3 (β-form)
|Octahedral (Fe3+, α-form, β-form)|
Heat capacity (C)
Std enthalpy of
Gibbs free energy (ΔfG˚)
|GHS Signal word||Warning|
|H315, H319, H335|
|NFPA 704 (fire diamond)|
Threshold limit value (TLV)
|5 mg/m3 (TWA)|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
|10 g/kg (rats, oral)|
|NIOSH (US health exposure limits):|
|TWA 10 mg/m3|
|TWA 5 mg/m3|
IDLH (Immediate danger)
Related iron oxides
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
α-Fe2O3 has the rhombohedral, corundum (α-Al2O3) structure and is the most common form. It occurs naturally as the mineral hematite which is mined as the main ore of iron. It is antiferromagnetic below ~260 K (Morin transition temperature), and exhibits weak ferromagnetism between 260 K and the Néel temperature, 950 K. It is easy to prepare using both thermal decomposition and precipitation in the liquid phase. Its magnetic properties are dependent on many factors, e.g. pressure, particle size, and magnetic field intensity.
γ-Fe2O3 has a cubic structure. It is metastable and converted from the alpha phase at high temperatures. It occurs naturally as the mineral maghemite. It is ferromagnetic and finds application in recording tapes, although ultrafine particles smaller than 10 nanometers are superparamagnetic. It can be prepared by thermal dehydratation of gamma iron(III) oxide-hydroxide. Another method involves the careful oxidation of iron(II,III) oxide (Fe3O4). The ultrafine particles can be prepared by thermal decomposition of iron(III) oxalate.
Several other phases have been identified or claimed. The β-phase is cubic body-centered (space group Ia3), metastable, and at temperatures above 500 °C (930 °F) converts to alpha phase. It can be prepared by reduction of hematite by carbon, pyrolysis of iron(III) chloride solution, or thermal decomposition of iron(III) sulfate. The epsilon phase is rhombic, and shows properties intermediate between alpha and gamma, and may have useful magnetic properties. Preparation of the pure epsilon phase has proven very challenging due to contamination with alpha and gamma phases. Material with a high proportion of epsilon phase can be prepared by thermal transformation of the gamma phase. This phase is also metastable, transforming to the alpha phase at between 500 and 750 °C (930 and 1,380 °F). Can also be prepared by oxidation of iron in an electric arc or by sol-gel precipitation from iron(III) nitrate. Additionally at high pressure an amorphous form is claimed. Recent research has revealed epsilon iron(III) oxide in ancient Chinese Jian ceramic glazes, which may provide insight into ways to produce that form in the lab.
Hydrated iron(III) oxidesEdit
Several hydrates of Iron(III) oxide exists. When alkali is added to solutions of soluble Fe(III) salts, a red-brown gelatinous precipitate forms. This is not Fe(OH)3, but Fe2O3·H2O (also written as Fe(O)OH). Several forms of the hydrated oxide of Fe(III) exist as well. The red lepidocrocite γ-Fe(O)OH, occurs on the outside of rusticles, and the orange goethite, which occurs internally in rusticles. When Fe2O3·H2O is heated, it loses its water of hydration. Further heating at 1670 K converts Fe2O3 to black Fe3O4 (FeIIFeIII2O4), which is known as the mineral magnetite. Fe(O)OH is soluble in acids, giving [Fe(H2O)6]3+. In concentrated aqueous alkali, Fe2O3 gives [Fe(OH)6]3−.
The most important reaction is its carbothermal reduction, which gives iron used in steel-making:
- Fe2O3 + 3 CO → 2 Fe + 3 CO2
- 2 Al + Fe2O3 → 2 Fe + Al2O3
This process is used to weld thick metals such as rails of train tracks by using a ceramic container to funnel the molten iron in between two sections of rail. Thermite is also used in weapons and making small-scale cast-iron sculptures and tools.
Partial reduction with hydrogen at about 400 °C produces magnetite, a black magnetic material that contains both Fe(III) and Fe(II):
- 3 Fe2O3 + H2 → 2 Fe3O4 + H2O
- ZnO + Fe2O3 → Zn(FeO2)2
Iron(III) oxide is a product of the oxidation of iron. It can be prepared in the laboratory by electrolyzing a solution of sodium bicarbonate, an inert electrolyte, with an iron anode:
- 4 Fe + 3 O2 + 2 H2O → 4 FeO(OH)
- 2 FeO(OH) → Fe2O3 + H2O
The overwhelming application of iron(III) oxide is as the feedstock of the steel and iron industries, e.g. the production of iron, steel, and many alloys.
A very fine powder of ferric oxide is known as "jeweler's rouge", "red rouge", or simply rouge. It is used to put the final polish on metallic jewelry and lenses, and historically as a cosmetic. Rouge cuts more slowly than some modern polishes, such as cerium(IV) oxide, but is still used in optics fabrication and by jewelers for the superior finish it can produce. When polishing gold, the rouge slightly stains the gold, which contributes to the appearance of the finished piece. Rouge is sold as a powder, paste, laced on polishing cloths, or solid bar (with a wax or grease binder). Other polishing compounds are also often called "rouge", even when they do not contain iron oxide. Jewelers remove the residual rouge on jewelry by use of ultrasonic cleaning. Products sold as "stropping compound" are often applied to a leather strop to assist in getting a razor edge on knives, straight razors, or any other edged tool.
Iron(III) oxide is also used as a pigment, under names "Pigment Brown 6", "Pigment Brown 7", and "Pigment Red 101". Some of them, e.g. Pigment Red 101 and Pigment Brown 6, are approved by the US Food and Drug Administration (FDA) for use in cosmetics. Iron oxides are used as pigments in dental composites alongside titanium oxides.
Hematite is the characteristic component of the Swedish paint color Falu red.
Iron(III) oxide was the most common magnetic particle used in all types of magnetic storage and recording media, including magnetic disks (for data storage) and magnetic tape (used in audio and video recording as well as data storage). Its use in computer disks was superseded by cobalt alloy, enabling thinner magnetic films with higher storage density.
α-Fe2O3 has been studied as a photoanode for solar water oxidation. However, its efficacy is limited by a short diffusion length (2-4 nm) of photo-excited charge carriers and subsequent fast recombination, requiring a large overpotential to drive the reaction. Research has been focused on improving the water oxidation performance of Fe2O3 using nanostructuring, surface functionalization, or by employing alternate crystal phases such as β-Fe2O3.
Calamine lotion, used to treat mild itchiness, is chiefly composed of a combination of zinc oxide, acting as astringent, and about 0.5% iron(III) oxide, the product's active ingredient, acting as antipruritic. The red color of iron(III) oxide is also mainly responsible for the lotion's widely familiar pink color.
- Haynes, p. 4.69
- Comey, Arthur Messinger; Hahn, Dorothy A. (February 1921). A Dictionary of Chemical Solubilities: Inorganic (2nd ed.). New York: The MacMillan Company. p. 433.
- Haynes, p. 4.141
- Ling, Yichuan; Wheeler, Damon A.; Zhang, Jin Zhong; Li, Yat (2013). Zhai, Tianyou; Yao, Jiannian (eds.). One-Dimensional Nanostructures: Principles and Applications. John Wiley & Sons, Inc. Hoboken, New Jersey: John Wiley & Sons, Inc. p. 167. ISBN 978-1-118-07191-5.
- Vujtek, Milan; Zboril, Radek; Kubinek, Roman; Mashlan, Miroslav. "Ultrafine Particles of Iron(III) Oxides by View of AFM – Novel Route for Study of Polymorphism in Nano-world" (PDF). Univerzity Palackého. Czech. Retrieved 12 July 2014.
- Haynes, p. 5.12
- Sigma-Aldrich Co., Iron(III) oxide. Retrieved on 2014-07-12.
- NIOSH Pocket Guide to Chemical Hazards. "#0344". National Institute for Occupational Safety and Health (NIOSH).
- "SDS of Iron(III) oxide" (PDF). KJLC. England: Kurt J Lesker Company Ltd. 5 January 2012. Retrieved 12 July 2014.
- Greedan, J. E. (1994). "Magnetic oxides". In King, R. Bruce (ed.). Encyclopedia of Inorganic chemistry. New York: John Wiley & Sons. ISBN 978-0-471-93620-6.
- Housecroft, Catherine E.; Sharpe, Alan G. (2008). "Chapter 22: d-block metal chemistry: the first row elements". Inorganic Chemistry (3rd ed.). Pearson. p. 716. ISBN 978-0-13-175553-6.
- Dejoie, Catherine; Sciau, Philippe; Li, Weidong; Noé, Laure; Mehta, Apurva; Chen, Kai; Luo, Hongjie; Kunz, Martin; Tamura, Nobumichi; Liu, Zhi (2015). "Learning from the past: Rare ε-Fe2O3 in the ancient black-glazed Jian (Tenmoku) wares". Scientific Reports. 4: 4941. doi:10.1038/srep04941. PMC 4018809. PMID 24820819.
- Adlam; Price (1945). Higher School Certificate Inorganic Chemistry. Leslie Slater Price.
- Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 1661.
- Greenwood, N. N.; Earnshaw, A. (1997). Chemistry of the Element (2nd ed.). Oxford: Butterworth-Heinemann. ISBN 978-0-7506-3365-9.
- Paint and Surface Coatings: Theory and Practice. William Andrew Inc. 1999. ISBN 978-1-884207-73-0.
- Banerjee, Avijit (2011). Pickard's Manual of Operative Dentistry. United States: Oxford University Press Inc., New York. p. 89. ISBN 978-0-19-957915-0.
- Piramanayagam, S. N. (2007). "Perpendicular recording media for hard disk drives". Journal of Applied Physics. 102 (1): 011301–011301–22. Bibcode:2007JAP...102a1301P. doi:10.1063/1.2750414.
- Kay, A., Cesar, I. and Grätzel, M. (2006). "New Benchmark for Water Photooxidation by Nanostructured α-Fe2O3 Films". Journal of the American Chemical Society. 128 (49): 15714–15721. doi:10.1021/ja064380l. PMID 17147381.CS1 maint: multiple names: authors list (link)
- Kennedy, J.H. and Frese, K.W. (1978). "Photooxidation of Water at α-Fe2O3 Electrodes". Journal of the Electrochemical Society. 125 (5): 709. doi:10.1149/1.2131532.CS1 maint: multiple names: authors list (link)
- Le Formal, F. (2014). "Back Electron–Hole Recombination in Hematite Photoanodes for Water Splitting". Journal of the American Chemical Society. 136 (6): 2564–2574. doi:10.1021/ja412058x. PMID 24437340.
- Zhong, D.K. and Gamelin, D.R. (2010). "Photoelectrochemical Water Oxidation by Cobalt Catalyst ("Co−Pi")/α-Fe2O3 Composite Photoanodes: Oxygen Evolution and Resolution of a Kinetic Bottleneck". Journal of the American Chemical Society. 132 (12): 4202–4207. doi:10.1021/ja908730h. PMID 20201513.CS1 maint: multiple names: authors list (link)
- Emery, J.D. (2014). "Atomic Layer Deposition of Metastable β-Fe2O3 via Isomorphic Epitaxy for Photoassisted Water Oxidation". ACS Applied Materials & Interfaces. 6 (24): 21894–21900. doi:10.1021/am507065y. PMID 25490778.
|Wikimedia Commons has media related to Iron(III) oxide.|