# Haar wavelet

In mathematics, the **Haar wavelet** is a sequence of rescaled "square-shaped" functions which together form a wavelet family or basis. Wavelet analysis is similar to Fourier analysis in that it allows a target function over an interval to be represented in terms of an orthonormal basis. The Haar sequence is now recognised as the first known wavelet basis and extensively used as a teaching example.

The **Haar sequence** was proposed in 1909 by Alfréd Haar.^{[1]}
Haar used these functions to give an example of an orthonormal system for the space of square-integrable functions on the unit interval [0, 1]. The study of wavelets, and even the term "wavelet", did not come until much later. As a special case of the Daubechies wavelet, the Haar wavelet is also known as **Db1**.

The Haar wavelet is also the simplest possible wavelet. The technical disadvantage of the Haar wavelet is that it is not continuous, and therefore not differentiable. This property can, however, be an advantage for the analysis of signals with sudden transitions, such as monitoring of tool failure in machines.^{[2]}

The Haar wavelet's mother wavelet function can be described as

Its scaling function can be described as

## Contents

## Haar functions and Haar systemEdit

For every pair *n*, *k* of integers in **Z**, the **Haar function** *ψ*_{n, k} is defined on the real line **R** by the formula

This function is supported on the right-open interval *I*_{n, k} = [ *k* 2^{−n}, (*k*+1) 2^{−n }), *i.e.*, it vanishes outside that interval. It has integral 0 and norm 1 in the Hilbert space *L*^{2}(**R**),

The Haar functions are pairwise orthogonal,

where *δ*_{i,j} represents the Kronecker delta. Here is the reason for orthogonality: when the two supporting intervals and are not equal, then they are either disjoint, or else, the smaller of the two supports, say , is contained in the lower or in the upper half of the other interval, on which the function remains constant. It follows in this case that the product of these two Haar functions is a multiple of the first Haar function, hence the product has integral 0.

The **Haar system** on the real line is the set of functions

It is complete in *L*^{2}(**R**): *The Haar system on the line is an orthonormal basis in* *L*^{2}(**R**).

## Haar wavelet propertiesEdit

The Haar wavelet has several notable properties:

- Any continuous real function with compact support can be approximated uniformly by linear combinations of and their shifted functions. This extends to those function spaces where any function therein can be approximated by continuous functions.
- Any continuous real function on [0, 1] can be approximated uniformly on [0, 1] by linear combinations of the constant function
**1**, and their shifted functions.^{[3]} - Orthogonality in the form

Here *δ*_{i,j} represents the Kronecker delta. The dual function of ψ(*t*) is ψ(*t*) itself.

- Wavelet/scaling functions with different scale
*n*have a functional relationship:^{[4]}since

- it follows that coefficients of scale
*n*can be calculated by coefficients of scale*n+1*: - If
- and
- then

## Edit

In this section, the discussion is restricted to the unit interval [0, 1] and to the Haar functions that are supported on [0, 1]. The system of functions considered by Haar in 1910,^{[5]}
called the **Haar system on [0, 1]** in this article, consists of the subset of Haar wavelets defined as

with the addition of the constant function **1** on [0, 1].

In Hilbert space terms, this Haar system on [0, 1] is a complete orthonormal system, *i.e.*, an orthonormal basis, for the space *L*^{2}([0, 1]) of square integrable functions on the unit interval.

The Haar system on [0, 1] —with the constant function **1** as first element, followed with the Haar functions ordered according to the lexicographic ordering of couples (*n*, *k*)— is further a monotone Schauder basis for the space *L*^{p}([0, 1]) when 1 ≤ *p* < ∞.^{[6]}
This basis is unconditional when 1 < *p* < ∞.^{[7]}

There is a related Rademacher system consisting of sums of Haar functions,

Notice that |*r*_{n}(*t*)| = 1 on [0, 1). This is an orthonormal system but it is not complete.^{[8]}^{[9]}
In the language of probability theory, the Rademacher sequence is an instance of a sequence of independent Bernoulli random variables with mean 0. The Khintchine inequality expresses the fact that in all the spaces *L*^{p}([0, 1]), 1 ≤ *p* < ∞, the Rademacher sequence is equivalent to the unit vector basis in ℓ^{2}.^{[10]} In particular, the closed linear span of the Rademacher sequence in *L*^{p}([0, 1]), 1 ≤ *p* < ∞, is isomorphic to ℓ^{2}.

### The Faber–Schauder systemEdit

The **Faber–Schauder system**^{[11]}^{[12]}^{[13]}
is the family of continuous functions on [0, 1] consisting of the constant function **1**, and of multiples of indefinite integrals of the functions in the Haar system on [0, 1], chosen to have norm 1 in the maximum norm. This system begins with *s*_{0} = **1**, then *s*_{1}(*t*) = *t* is the indefinite integral vanishing at 0 of the function **1**, first element of the Haar system on [0, 1]. Next, for every integer *n* ≥ 0, functions *s*_{n, k} are defined by the formula

These functions *s*_{n, k} are continuous, piecewise linear, supported by the interval *I*_{n, k} that also supports ψ_{n, k}. The function *s*_{n, k} is equal to 1 at the midpoint *x*_{n, k} of the interval *I*_{n, k}, linear on both halves of that interval. It takes values between 0 and 1 everywhere.

The Faber–Schauder system is a Schauder basis for the space *C*([0, 1]) of continuous functions on [0, 1].^{[6]}
For every *f* in *C*([0, 1]), the partial sum

of the series expansion of *f* in the Faber–Schauder system is the continuous piecewise linear function that agrees with *f* at the 2^{n} + 1 points *k* 2^{−n}, where 0 ≤ *k* ≤ 2^{n}. Next, the formula

gives a way to compute the expansion of *f* step by step. Since *f* is uniformly continuous, the sequence {*f*_{n}} converges uniformly to *f*. It follows that the Faber–Schauder series expansion of *f* converges in *C*([0, 1]), and the sum of this series is equal to *f*.

### The Franklin systemEdit

The **Franklin system** is obtained from the Faber–Schauder system by the Gram–Schmidt orthonormalization procedure.^{[14]}^{[15]}
Since the Franklin system has the same linear span as that of the Faber–Schauder system, this span is dense in *C*([0, 1]), hence in *L*^{2}([0, 1]). The Franklin system is therefore an orthonormal basis for *L*^{2}([0, 1]), consisting of continuous piecewise linear functions. P. Franklin proved in 1928 that this system is a Schauder basis for *C*([0, 1]).^{[16]}
The Franklin system is also an unconditional basis for the space *L*^{p}([0, 1]) when 1 < *p* < ∞.^{[17]}
The Franklin system provides a Schauder basis in the disk algebra *A*(*D*).^{[17]}
This was proved in 1974 by Bočkarev, after the existence of a basis for the disk algebra had remained open for more than forty years.^{[18]}

Bočkarev's construction of a Schauder basis in *A*(*D*) goes as follows: let *f* be a complex valued Lipschitz function on [0, π]; then *f* is the sum of a cosine series with absolutely summable coefficients. Let *T*(*f*) be the element of *A*(*D*) defined by the complex power series with the same coefficients,

Bočkarev's basis for *A*(*D*) is formed by the images under *T* of the functions in the Franklin system on [0, π]. Bočkarev's equivalent description for the mapping *T* starts by extending *f* to an even Lipschitz function *g*_{1} on [−π, π], identified with a Lipschitz function on the unit circle **T**. Next, let *g*_{2} be the conjugate function of *g*_{1}, and define *T*(*f*) to be the function in *A*(*D*) whose value on the boundary **T** of *D* is equal to *g*_{1} + i *g*_{2}.

When dealing with 1-periodic continuous functions, or rather with continuous functions *f* on [0, 1] such that *f*(0) = *f*(1), one removes the function *s*_{1}(*t*) = *t* from the Faber–Schauder system, in order to obtain the **periodic Faber–Schauder system**. The **periodic Franklin system** is obtained by orthonormalization from the periodic Faber–-Schauder system.^{[19]}
One can prove Bočkarev's result on *A*(*D*) by proving that the periodic Franklin system on [0, 2π] is a basis for a Banach space *A*_{r} isomorphic to *A*(*D*).^{[19]}
The space *A*_{r} consists of complex continuous functions on the unit circle **T** whose conjugate function is also continuous.

## Haar matrixEdit

The 2×2 Haar matrix that is associated with the Haar wavelet is

Using the discrete wavelet transform, one can transform any sequence of even length into a sequence of two-component-vectors . If one right-multiplies each vector with the matrix , one gets the result of one stage of the fast Haar-wavelet transform. Usually one separates the sequences *s* and *d* and continues with transforming the sequence *s*. Sequence *s* is often referred to as the *averages* part, whereas *d* is known as the *details* part.^{[20]}

If one has a sequence of length a multiple of four, one can build blocks of 4 elements and transform them in a similar manner with the 4×4 Haar matrix

which combines two stages of the fast Haar-wavelet transform.

Compare with a Walsh matrix, which is a non-localized 1/–1 matrix.

Generally, the 2N×2N Haar matrix can be derived by the following equation.

- where and is the Kronecker product.

The Kronecker product of , where is an m×n matrix and is a p×q matrix, is expressed as

An un-normalized 8-point Haar matrix is shown below

Note that, the above matrix is an un-normalized Haar matrix. The Haar matrix required by the Haar transform should be normalized.

From the definition of the Haar matrix , one can observe that, unlike the Fourier transform, has only real elements (i.e., 1, -1 or 0) and is non-symmetric.

Take the 8-point Haar matrix as an example. The first row of measures the average value, and the second row of measures a low frequency component of the input vector. The next two rows are sensitive to the first and second half of the input vector respectively, which corresponds to moderate frequency components. The remaining four rows are sensitive to the four section of the input vector, which corresponds to high frequency components.^{[21]}

## Haar transformEdit

The **Haar transform** is the simplest of the wavelet transforms. This transform cross-multiplies a function against the Haar wavelet with various shifts and stretches, like the Fourier transform cross-multiplies a function against a sine wave with two phases and many stretches.^{[22]}^{[clarification needed]}

### IntroductionEdit

The **Haar transform** is one of the oldest transform functions, proposed in 1910 by the Hungarian mathematician Alfréd Haar. It is found effective in applications such as signal and image compression in electrical and computer engineering as it provides a simple and computationally efficient approach for analysing the local aspects of a signal.

The Haar transform is derived from the Haar matrix. An example of a 4x4 Haar transformation matrix is shown below.

The Haar transform can be thought of as a sampling process in which rows of the transformation matrix act as samples of finer and finer resolution.

Compare with the Walsh transform, which is also 1/–1, but is non-localized.

### PropertyEdit

The Haar transform has the following properties

- 1. No need for multiplications. It requires only additions and there are many elements with zero value in the Haar matrix, so the computation time is short. It is faster than Walsh transform, whose matrix is composed of +1 and −1.
- 2. Input and output length are the same. However, the length should be a power of 2, i.e. .
- 3. It can be used to analyse the localized feature of signals. Due to the orthogonal property of the Haar function, the frequency components of input signal can be analyzed.

### Haar transform and Inverse Haar transformEdit

The Haar transform *y*_{n} of an n-input function *x*_{n} is

The Haar transform matrix is real and orthogonal. Thus, the inverse Haar transform can be derived by the following equations.

- where is the identity matrix. For example, when n = 4

Thus, the inverse Haar transform is

### ExampleEdit

The Haar transform coefficients of a n=4-point signal can be found as

The input signal can then be perfectly reconstructed by the inverse Haar transform

### ApplicationEdit

Modern cameras are capable of producing images with resolutions in the range of tens of megapixels. These images need to be compressed before storage and transfer. The Haar transform can be used for image compression. The basic idea is to transfer the image into a matrix in which each element of the matrix represents a pixel in the image. For example, a 256×256 matrix is saved for a 256×256 image. JPEG image compression involves cutting the original image into 8×8 sub-images. Each sub-image is an 8×8 matrix.

The 2-D Haar transform is required. The equation of the Haar transform is , where is a *n* × *n* matrix and is n-point Haar transform. The inverse Haar transform is

## See alsoEdit

## NotesEdit

**^**see p. 361 in Haar (1910).**^**Lee, B.; Tarng, Y. S. (1999). "Application of the discrete wavelet transform to the monitoring of tool failure in end milling using the spindle motor current".*International Journal of Advanced Manufacturing Technology*.**15**(4): 238–243. doi:10.1007/s001700050062.**^**As opposed to the preceding statement, this fact is not obvious: see p. 363 in Haar (1910).**^**Vidakovic, Brani (2010).*Statistical Modeling by Wavelets*(2 ed.). pp. 60, 63. doi:10.1002/9780470317020.**^**p. 361 in Haar (1910)- ^
^{a}^{b}see p. 3 in J. Lindenstrauss, L. Tzafriri, (1977), "Classical Banach Spaces I, Sequence Spaces", Ergebnisse der Mathematik und ihrer Grenzgebiete**92**, Berlin: Springer-Verlag, ISBN 3-540-08072-4. **^**The result is due to R. E. Paley,*A remarkable series of orthogonal functions (I)*, Proc. London Math. Soc.**34**(1931) pp. 241-264. See also p. 155 in J. Lindenstrauss, L. Tzafriri, (1979), "Classical Banach spaces II, Function spaces". Ergebnisse der Mathematik und ihrer Grenzgebiete**97**, Berlin: Springer-Verlag, ISBN 3-540-08888-1.**^**"Orthogonal system".*Encyclopaedia of Mathematics*.**^**Walter, Gilbert G.; Shen, Xiaoping (2001).*Wavelets and Other Orthogonal Systems*. Boca Raton: Chapman. ISBN 1-58488-227-1.**^**see for example p. 66 in J. Lindenstrauss, L. Tzafriri, (1977), "Classical Banach Spaces I, Sequence Spaces", Ergebnisse der Mathematik und ihrer Grenzgebiete**92**, Berlin: Springer-Verlag, ISBN 3-540-08072-4.**^**Faber, Georg (1910), "Über die Orthogonalfunktionen des Herrn Haar",*Deutsche Math.-Ver*(in German)**19**: 104–112. ISSN 0012-0456; http://www-gdz.sub.uni-goettingen.de/cgi-bin/digbib.cgi?PPN37721857X ; http://resolver.sub.uni-goettingen.de/purl?GDZPPN002122553**^**Schauder, Juliusz (1928), "Eine Eigenschaft des Haarschen Orthogonalsystems",*Mathematische Zeitschrift***28**: 317–320.**^**Golubov, B.I. (2001) [1994], "Faber–Schauder system", in Hazewinkel, Michiel (ed.),*Encyclopedia of Mathematics*, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 978-1-55608-010-4**^**see Z. Ciesielski,*Properties of the orthonormal Franklin system*. Studia Math. 23 1963 141–157.**^**Franklin system. B.I. Golubov (originator), Encyclopedia of Mathematics. URL: http://www.encyclopediaofmath.org/index.php?title=Franklin_system&oldid=16655**^**Philip Franklin,*A set of continuous orthogonal functions*, Math. Ann. 100 (1928), 522-529.- ^
^{a}^{b}S. V. Bočkarev,*Existence of a basis in the space of functions analytic in the disc, and some properties of Franklin's system*. Mat. Sb.**95**(1974), 3–18 (Russian). Translated in Math. USSR-Sb.**24**(1974), 1–16. **^**The question appears p. 238, §3 in Banach's book, Banach, Stefan (1932),*Théorie des opérations linéaires*, Monografie Matematyczne,**1**, Warszawa: Subwencji Funduszu Kultury Narodowej, Zbl 0005.20901. The disk algebra*A*(*D*) appears as Example 10, p. 12 in Banach's book.- ^
^{a}^{b}See p. 161, III.D.20 and p. 192, III.E.17 in Wojtaszczyk, Przemysław (1991),*Banach spaces for analysts*, Cambridge Studies in Advanced Mathematics,**25**, Cambridge: Cambridge University Press, pp. xiv+382, ISBN 0-521-35618-0 **^**Ruch, David K.; Van Fleet, Patrick J. (2009).*Wavelet Theory: An Elementary Approach with Applications*. John Wiley & Sons. ISBN 978-0-470-38840-2.**^**"haar". Fourier.eng.hmc.edu. 30 October 2013. Retrieved 23 November 2013.**^**The Haar Transform

## ReferencesEdit

- Haar, Alfréd (1910), "Zur Theorie der orthogonalen Funktionensysteme",
*Mathematische Annalen*,**69**(3): 331–371, doi:10.1007/BF01456326 - Charles K. Chui,
*An Introduction to Wavelets*, (1992), Academic Press, San Diego, ISBN 0-585-47090-1 - English Translation of Haar's seminal article: https://www.uni-hohenheim.de/~gzim/Publications/haar.pdf

## External linksEdit

Wikimedia Commons has media related to .Haar wavelet |

- Hazewinkel, Michiel, ed. (2001) [1994], "Haar system",
*Encyclopedia of Mathematics*, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 978-1-55608-010-4 - Free Haar wavelet filtering implementation and interactive demo
- Free Haar wavelet denoising and lossy signal compression