A glacier (US: // or UK: / /,) is a persistent body of dense ice that is constantly moving under its own weight. A glacier forms where the accumulation of snow exceeds its ablation (melting and sublimation) over many years, often centuries. Glaciers slowly deform and flow due to stresses induced by their weight, creating crevasses, seracs, and other distinguishing features. They also abrade rock and debris from their substrate to create landforms such as cirques and moraines. Glaciers form only on land and are distinct from the much thinner sea ice and lake ice that form on the surface of bodies of water.
On Earth, 99% of glacial ice is contained within vast ice sheets (also known as "continental glaciers") in the polar regions, but glaciers may be found in mountain ranges on every continent including Oceania's high-latitude oceanic island countries such as New Zealand. Between 35°N and 35°S, glaciers occur only in the Himalayas, Andes, Rocky Mountains, a few high mountains in East Africa, Mexico, New Guinea and on Zard Kuh in Iran. Glaciers cover about 10 percent of Earth's land surface. Continental glaciers cover nearly 13 million km2 (5 million sq mi) or about 98 percent of Antarctica's 13.2 million km2 (5.1 million sq mi), with an average thickness of 2,100 m (7,000 ft). Greenland and Patagonia also have huge expanses of continental glaciers. The volume of glaciers, not including the ice sheets of Antarctica and Greenland, has been estimated as 170,000 km3.
Glacial ice is the largest reservoir of freshwater on Earth. Many glaciers from temperate, alpine and seasonal polar climates store water as ice during the colder seasons and release it later in the form of meltwater as warmer summer temperatures cause the glacier to melt, creating a water source that is especially important for plants, animals and human uses when other sources may be scant. Within high-altitude and Antarctic environments, the seasonal temperature difference is often not sufficient to release meltwater.
Since glacial mass is affected by long-term climatic changes, e.g., precipitation, mean temperature, and cloud cover, glacial mass changes are considered among the most sensitive indicators of climate change and are a major source of variations in sea level.
A large piece of compressed ice, or a glacier, appears blue, as large quantities of water appear blue. This is because water molecules absorb other colors more efficiently than blue. The other reason for the blue color of glaciers is the lack of air bubbles. Air bubbles, which give a white color to ice, are squeezed out by pressure increasing the density of the created ice.
- 1 Etymology and related terms
- 2 Types
- 3 Formation
- 4 Structure
- 5 Motion
- 6 Geography
- 7 Glacial geology
- 8 Isostatic rebound
- 9 On Mars
- 10 See also
- 11 Notes
- 12 References
- 13 Further reading
- 14 External links
The word glacier is a loanword from French and goes back, via Franco-Provençal, to the Vulgar Latin glaciārium, derived from the Late Latin glacia, and ultimately Latin glaciēs, meaning "ice". The processes and features caused by or related to glaciers are referred to as glacial. The process of glacier establishment, growth and flow is called glaciation. The corresponding area of study is called glaciology. Glaciers are important components of the global cryosphere.
Classification by size, shape and behaviorEdit
Glaciers are categorized by their morphology, thermal characteristics, and behavior. Alpine glaciers form on the crests and slopes of mountains. A glacier that fills a valley is called a valley glacier, or alternatively an alpine glacier or mountain glacier. A large body of glacial ice astride a mountain, mountain range, or volcano is termed an ice cap or ice field. Ice caps have an area less than 50,000 km2 (19,000 sq mi) by definition.
Glacial bodies larger than 50,000 km2 (19,000 sq mi) are called ice sheets or continental glaciers. Several kilometers deep, they obscure the underlying topography. Only nunataks protrude from their surfaces. The only extant ice sheets are the two that cover most of Antarctica and Greenland. They contain vast quantities of fresh water, enough that if both melted, global sea levels would rise by over 70 m (230 ft). Portions of an ice sheet or cap that extend into water are called ice shelves; they tend to be thin with limited slopes and reduced velocities. Narrow, fast-moving sections of an ice sheet are called ice streams. In Antarctica, many ice streams drain into large ice shelves. Some drain directly into the sea, often with an ice tongue, like Mertz Glacier.
Tidewater glaciers are glaciers that terminate in the sea, including most glaciers flowing from Greenland, Antarctica, Baffin and Ellesmere Islands in Canada, Southeast Alaska, and the Northern and Southern Patagonian Ice Fields. As the ice reaches the sea, pieces break off, or calve, forming icebergs. Most tidewater glaciers calve above sea level, which often results in a tremendous impact as the iceberg strikes the water. Tidewater glaciers undergo centuries-long cycles of advance and retreat that are much less affected by climate change than those of other glaciers.
Sightseeing boat in front of a tidewater glacier, Kenai Fjords National Park, Alaska.
Classification by thermal stateEdit
Thermally, a temperate glacier is at melting point throughout the year, from its surface to its base. The ice of a polar glacier is always below the freezing point from the surface to its base, although the surface snowpack may experience seasonal melting. A subpolar glacier includes both temperate and polar ice, depending on depth beneath the surface and position along the length of the glacier. In a similar way, the thermal regime of a glacier is often described by its basal temperature. A cold-based glacier is below freezing at the ice-ground interface, and is thus frozen to the underlying substrate. A warm-based glacier is above or at freezing at the interface, and is able to slide at this contact. This contrast is thought to a large extent to govern the ability of a glacier to effectively erode its bed, as sliding ice promotes plucking at rock from the surface below. Glaciers which are partly cold-based and partly warm-based are known as polythermal.
Glaciers form where the accumulation of snow and ice exceeds ablation. A glacier usually originates from a landform called 'cirque' (or corrie or cwm) – a typically armchair-shaped geological feature (such as a depression between mountains enclosed by arêtes) – which collects and compresses through gravity the snow that falls into it. This snow collects and is compacted by the weight of the snow falling above it, forming névé. Further crushing of the individual snowflakes and squeezing the air from the snow turns it into "glacial ice". This glacial ice will fill the cirque until it "overflows" through a geological weakness or vacancy, such as the gap between two mountains. When the mass of snow and ice is sufficiently thick, it begins to move due to a combination of surface slope, gravity, and pressure. On steeper slopes, this can occur with as little as 15 m (50 ft) of snow-ice.
In temperate glaciers, snow repeatedly freezes and thaws, changing into granular ice called firn. Under the pressure of the layers of ice and snow above it, this granular ice fuses into denser and denser firn. Over a period of years, layers of firn undergo further compaction and become glacial ice. Glacier ice is slightly less dense than ice formed from frozen water because it contains tiny trapped air bubbles.
Glacial ice has a distinctive blue tint because it absorbs some red light due to an overtone of the infrared OH stretching mode of the water molecule. Liquid water is blue for the same reason. The blue of glacier ice is sometimes misattributed to Rayleigh scattering due to bubbles in the ice.
A glacier originates at a location called its glacier head and terminates at its glacier foot, snout, or terminus.
Glaciers are broken into zones based on surface snowpack and melt conditions. The ablation zone is the region where there is a net loss in glacier mass. The equilibrium line separates the ablation zone and the accumulation zone; it is the altitude where the amount of new snow gained by accumulation is equal to the amount of ice lost through ablation. The upper part of a glacier, where accumulation exceeds ablation, is called the accumulation zone. In general, the accumulation zone accounts for 60–70% of the glacier's surface area, more if the glacier calves icebergs. Ice in the accumulation zone is deep enough to exert a downward force that erodes underlying rock. After a glacier melts, it often leaves behind a bowl- or amphitheater-shaped depression that ranges in size from large basins like the Great Lakes to smaller mountain depressions known as cirques.
The accumulation zone can be subdivided based on its melt conditions.
- The dry snow zone is a region where no melt occurs, even in the summer, and the snowpack remains dry.
- The percolation zone is an area with some surface melt, causing meltwater to percolate into the snowpack. This zone is often marked by refrozen ice lenses, glands, and layers. The snowpack also never reaches melting point.
- Near the equilibrium line on some glaciers, a superimposed ice zone develops. This zone is where meltwater refreezes as a cold layer in the glacier, forming a continuous mass of ice.
- The wet snow zone is the region where all of the snow deposited since the end of the previous summer has been raised to 0 °C.
The health of a glacier is usually assessed by determining the glacier mass balance or observing terminus behavior. Healthy glaciers have large accumulation zones, more than 60% of their area snowcovered at the end of the melt season, and a terminus with vigorous flow.
Following the Little Ice Age's end around 1850, glaciers around the Earth have retreated substantially. A slight cooling led to the advance of many alpine glaciers between 1950 and 1985, but since 1985 glacier retreat and mass loss has become larger and increasingly ubiquitous.
Glaciers move, or flow, downhill due to gravity and the internal deformation of ice. Ice behaves like a brittle solid until its thickness exceeds about 50 m (160 ft). The pressure on ice deeper than 50 m causes plastic flow. At the molecular level, ice consists of stacked layers of molecules with relatively weak bonds between layers. When the stress on the layer above exceeds the inter-layer binding strength, it moves faster than the layer below.
Glaciers also move through basal sliding. In this process, a glacier slides over the terrain on which it sits, lubricated by the presence of liquid water. The water is created from ice that melts under high pressure from frictional heating. Basal sliding is dominant in temperate, or warm-based glaciers.
Although evidence in favour of glacial flow was known by the early 19th century, other theories of glacial motion were advanced, such as the idea that meltwater, refreezing inside glaciers, caused the glacier to dilate and extend its length. As it became clear that glaciers behaved to some degree as if the ice were a viscous fluid, it was argued that "regelation", or the melting and refreezing of ice at a temperature lowered by the pressure on the ice inside the glacier, was what allowed the ice to deform and flow. James Forbes came up with the essentially correct explanation in the 1840s, although it was several decades before it was fully accepted.
Fracture zone and cracksEdit
The top 50 m (160 ft) of a glacier are rigid because they are under low pressure. This upper section is known as the fracture zone and moves mostly as a single unit over the plastically flowing lower section. When a glacier moves through irregular terrain, cracks called crevasses develop in the fracture zone. Crevasses form due to differences in glacier velocity. If two rigid sections of a glacier move at different speeds and directions, shear forces cause them to break apart, opening a crevasse. Crevasses are seldom more than 46 m (150 ft) deep but in some cases can be at least 300 m (1,000 ft). Beneath this point, the plasticity of the ice is too great for cracks to form. Intersecting crevasses can create isolated peaks in the ice, called seracs.
Crevasses can form in several different ways. Transverse crevasses are transverse to flow and form where steeper slopes cause a glacier to accelerate. Longitudinal crevasses form semi-parallel to flow where a glacier expands laterally. Marginal crevasses form from the edge of the glacier, due to the reduction in speed caused by friction of the valley walls. Marginal crevasses are usually largely transverse to flow. Moving glacier ice can sometimes separate from the stagnant ice above, forming a bergschrund. Bergschrunds resemble crevasses but are singular features at a glacier's margins.
Crevasses make travel over glaciers hazardous, especially when they are hidden by fragile snow bridges.
Below the equilibrium line, glacial meltwater is concentrated in stream channels. Meltwater can pool in proglacial lakes on top of a glacier or descend into the depths of a glacier via moulins. Streams within or beneath a glacier flow in englacial or sub-glacial tunnels. These tunnels sometimes reemerge at the glacier's surface.
Ice cracks in the Titlis Glacier.
The speed of glacial displacement is partly determined by friction. Friction makes the ice at the bottom of the glacier move more slowly than ice at the top. In alpine glaciers, friction is also generated at the valley's side walls, which slows the edges relative to the center.
Mean speeds vary greatly, but is typically around 1 m (3 ft) per day. There may be no motion in stagnant areas; for example, in parts of Alaska, trees can establish themselves on surface sediment deposits. In other cases, glaciers can move as fast as 20–30 m (70–100 ft) per day, such as in Greenland's Jakobshavn Isbræ (Greenlandic: Sermeq Kujalleq). Velocity increases with increasing slope, increasing thickness, increasing snowfall, increasing longitudinal confinement, increasing basal temperature, increasing meltwater production and reduced bed hardness.
A few glaciers have periods of very rapid advancement called surges. These glaciers exhibit normal movement until suddenly they accelerate, then return to their previous state. During these surges, the glacier may reach velocities far greater than normal speed. These surges may be caused by failure of the underlying bedrock, the pooling of meltwater at the base of the glacier — perhaps delivered from a supraglacial lake — or the simple accumulation of mass beyond a critical "tipping point". Temporary rates up to 90 m (300 ft) per day have occurred when increased temperature or overlying pressure caused bottom ice to melt and water to accumulate beneath a glacier.
In glaciated areas where the glacier moves faster than one km per year, glacial earthquakes occur. These are large scale earthquakes that have seismic magnitudes as high as 6.1. The number of glacial earthquakes in Greenland peaks every year in July, August and September and increased rapidly in the 1990s and 2000s. In a study using data from January 1993 through October 2005, more events were detected every year since 2002, and twice as many events were recorded in 2005 as there were in any other year.
Ogives (or Forbes bands) are alternating wave crests and valleys that appear as dark and light bands of ice on glacier surfaces. They are linked to seasonal motion of glaciers; the width of one dark and one light band generally equals the annual movement of the glacier. Ogives are formed when ice from an icefall is severely broken up, increasing ablation surface area during summer. This creates a swale and space for snow accumulation in the winter, which in turn creates a ridge. Sometimes ogives consist only of undulations or color bands and are described as wave ogives or band ogives.
Glaciers are present on every continent and approximately fifty countries, excluding those (Australia, South Africa) that have glaciers only on distant subantarctic island territories. Extensive glaciers are found in Antarctica, Argentina, Chile, Canada, Alaska, Greenland and Iceland. Mountain glaciers are widespread, especially in the Andes, the Himalayas, the Rocky Mountains, the Caucasus, Scandinavian mountains, and the Alps. Snezhnika glacier in Pirin Mountain, Bulgaria with a latitude of 41°46′09″ N is the southernmost glacial mass in Europe. Mainland Australia currently contains no glaciers, although a small glacier on Mount Kosciuszko was present in the last glacial period. In New Guinea, small, rapidly diminishing, glaciers are located on its highest summit massif of Puncak Jaya. Africa has glaciers on Mount Kilimanjaro in Tanzania, on Mount Kenya and in the Rwenzori Mountains. Oceanic islands with glaciers include Iceland, several of the islands off the coast of Norway including Svalbard and Jan Mayen to the far North, New Zealand and the subantarctic islands of Marion, Heard, Grande Terre (Kerguelen) and Bouvet. During glacial periods of the Quaternary, Taiwan, Hawaii on Mauna Kea and Tenerife also had large alpine glaciers, while the Faroe and Crozet Islands were completely glaciated.
The permanent snow cover necessary for glacier formation is affected by factors such as the degree of slope on the land, amount of snowfall and the winds. Glaciers can be found in all latitudes except from 20° to 27° north and south of the equator where the presence of the descending limb of the Hadley circulation lowers precipitation so much that with high insolation snow lines reach above 6,500 m (21,330 ft). Between 19˚N and 19˚S, however, precipitation is higher and the mountains above 5,000 m (16,400 ft) usually have permanent snow.
Even at high latitudes, glacier formation is not inevitable. Areas of the Arctic, such as Banks Island, and the McMurdo Dry Valleys in Antarctica are considered polar deserts where glaciers cannot form because they receive little snowfall despite the bitter cold. Cold air, unlike warm air, is unable to transport much water vapor. Even during glacial periods of the Quaternary, Manchuria, lowland Siberia, and central and northern Alaska, though extraordinarily cold, had such light snowfall that glaciers could not form.
In addition to the dry, unglaciated polar regions, some mountains and volcanoes in Bolivia, Chile and Argentina are high (4,500 to 6,900 m or 14,800 to 22,600 ft) and cold, but the relative lack of precipitation prevents snow from accumulating into glaciers. This is because these peaks are located near or in the hyperarid Atacama Desert.
As glaciers flow over bedrock, they soften and lift blocks of rock into the ice. This process, called plucking, is caused by subglacial water that penetrates fractures in the bedrock and subsequently freezes and expands. This expansion causes the ice to act as a lever that loosens the rock by lifting it. Thus, sediments of all sizes become part of the glacier's load. If a retreating glacier gains enough debris, it may become a rock glacier, like the Timpanogos Glacier in Utah.
Abrasion occurs when the ice and its load of rock fragments slide over bedrock and function as sandpaper, smoothing and polishing the bedrock below. The pulverized rock this process produces is called rock flour and is made up of rock grains between 0.002 and 0.00625 mm in size. Abrasion leads to steeper valley walls and mountain slopes in alpine settings, which can cause avalanches and rock slides, which add even more material to the glacier.
Glacial abrasion is commonly characterized by glacial striations. Glaciers produce these when they contain large boulders that carve long scratches in the bedrock. By mapping the direction of the striations, researchers can determine the direction of the glacier's movement. Similar to striations are chatter marks, lines of crescent-shape depressions in the rock underlying a glacier. They are formed by abrasion when boulders in the glacier are repeatedly caught and released as they are dragged along the bedrock.
The rate of glacier erosion varies. Six factors control erosion rate:
- Velocity of glacial movement
- Thickness of the ice
- Shape, abundance and hardness of rock fragments contained in the ice at the bottom of the glacier
- Relative ease of erosion of the surface under the glacier
- Thermal conditions at the glacier base
- Permeability and water pressure at the glacier base
When the bedrock has frequent fractures on the surface, glacial erosion rates tend to increase as plucking is the main erosive force on the surface; when the bedrock has wide gaps between sporadic fractures, however, abrasion tends to be the dominant erosive form and glacial erosion rates become slow.
Glaciers in lower latitudes tend to be much more erosive than glaciers in higher latitudes, because they have more meltwater reaching the glacial base and facilitate sediment production and transport under the same moving speed and amount of ice.
Material that becomes incorporated in a glacier is typically carried as far as the zone of ablation before being deposited. Glacial deposits are of two distinct types:
- Glacial till: material directly deposited from glacial ice. Till includes a mixture of undifferentiated material ranging from clay size to boulders, the usual composition of a moraine.
- Fluvial and outwash sediments: sediments deposited by water. These deposits are stratified by size.
Larger pieces of rock that are encrusted in till or deposited on the surface are called "glacial erratics". They range in size from pebbles to boulders, but as they are often moved great distances, they may be drastically different from the material upon which they are found. Patterns of glacial erratics hint at past glacial motions.
Glacial moraines are formed by the deposition of material from a glacier and are exposed after the glacier has retreated. They usually appear as linear mounds of till, a non-sorted mixture of rock, gravel, and boulders within a matrix of fine powdery material. Terminal or end moraines are formed at the foot or terminal end of a glacier. Lateral moraines are formed on the sides of the glacier. Medial moraines are formed when two different glaciers merge and the lateral moraines of each coalesce to form a moraine in the middle of the combined glacier. Less apparent are ground moraines, also called glacial drift, which often blankets the surface underneath the glacier downslope from the equilibrium line.
The term moraine is of French origin. It was coined by peasants to describe alluvial embankments and rims found near the margins of glaciers in the French Alps. In modern geology, the term is used more broadly, and is applied to a series of formations, all of which are composed of till. Moraines can also create moraine-dammed lakes.
Drumlins are asymmetrical, canoe-shaped hills made mainly of till. Their heights vary from 15 to 50 meters and they can reach a kilometer in length. The steepest side of the hill faces the direction from which the ice advanced (stoss), while a longer slope is left in the ice's direction of movement (lee).
Although the process that forms drumlins is not fully understood, their shape implies that they are products of the plastic deformation zone of ancient glaciers. It is believed that many drumlins were formed when glaciers advanced over and altered the deposits of earlier glaciers.
Glacial valleys, cirques, arêtes, and pyramidal peaksEdit
Before glaciation, mountain valleys have a characteristic "V" shape, produced by eroding water. During glaciation, these valleys are often widened, deepened and smoothed to form a "U"-shaped glacial valley or glacial trough, as it is sometimes called. The erosion that creates glacial valleys truncates any spurs of rock or earth that may have earlier extended across the valley, creating broadly triangular-shaped cliffs called truncated spurs. Within glacial valleys, depressions created by plucking and abrasion can be filled by lakes, called paternoster lakes. If a glacial valley runs into a large body of water, it forms a fjord.
Typically glaciers deepen their valleys more than their smaller tributaries. Therefore, when glaciers recede, the valleys of the tributary glaciers remain above the main glacier's depression and are called hanging valleys.
At the start of a classic valley glacier is a bowl-shaped cirque, which has escarped walls on three sides but is open on the side that descends into the valley. Cirques are where ice begins to accumulate in a glacier. Two glacial cirques may form back to back and erode their backwalls until only a narrow ridge, called an arête is left. This structure may result in a mountain pass. If multiple cirques encircle a single mountain, they create pointed pyramidal peaks; particularly steep examples are called horns.
Passage of glacial ice over an area of bedrock may cause the rock to be sculpted into a knoll called a roche moutonnée, or "sheepback" rock. Roches moutonnées may be elongated, rounded and asymmetrical in shape. They range in length from less than a meter to several hundred meters long. Roches moutonnées have a gentle slope on their up-glacier sides and a steep to vertical face on their down-glacier sides. The glacier abrades the smooth slope on the upstream side as it flows along, but tears rock fragments loose and carries them away from the downstream side via plucking.
As the water that rises from the ablation zone moves away from the glacier, it carries fine eroded sediments with it. As the speed of the water decreases, so does its capacity to carry objects in suspension. The water thus gradually deposits the sediment as it runs, creating an alluvial plain. When this phenomenon occurs in a valley, it is called a valley train. When the deposition is in an estuary, the sediments are known as bay mud.
Outwash plains and valley trains are usually accompanied by basins known as "kettles". These are small lakes formed when large ice blocks that are trapped in alluvium melt and produce water-filled depressions. Kettle diameters range from 5 m to 13 km, with depths of up to 45 meters. Most are circular in shape because the blocks of ice that formed them were rounded as they melted.
When a glacier's size shrinks below a critical point, its flow stops and it becomes stationary. Meanwhile, meltwater within and beneath the ice leaves stratified alluvial deposits. These deposits, in the forms of columns, terraces and clusters, remain after the glacier melts and are known as "glacial deposits".
Glacial deposits that take the shape of hills or mounds are called kames. Some kames form when meltwater deposits sediments through openings in the interior of the ice. Others are produced by fans or deltas created by meltwater. When the glacial ice occupies a valley, it can form terraces or kames along the sides of the valley.
Long, sinuous glacial deposits are called eskers. Eskers are composed of sand and gravel that was deposited by meltwater streams that flowed through ice tunnels within or beneath a glacier. They remain after the ice melts, with heights exceeding 100 meters and lengths of as long as 100 km.
Very fine glacial sediments or rock flour is often picked up by wind blowing over the bare surface and may be deposited great distances from the original fluvial deposition site. These eolian loess deposits may be very deep, even hundreds of meters, as in areas of China and the Midwestern United States of America. Katabatic winds can be important in this process.
Large masses, such as ice sheets or glaciers, can depress the crust of the Earth into the mantle. The depression usually totals a third of the ice sheet or glacier's thickness. After the ice sheet or glacier melts, the mantle begins to flow back to its original position, pushing the crust back up. This post-glacial rebound, which proceeds very slowly after the melting of the ice sheet or glacier, is currently occurring in measurable amounts in Scandinavia and the Great Lakes region of North America.
A geomorphological feature created by the same process on a smaller scale is known as dilation-faulting. It occurs where previously compressed rock is allowed to return to its original shape more rapidly than can be maintained without faulting. This leads to an effect similar to what would be seen if the rock were hit by a large hammer. Dilation faulting can be observed in recently de-glaciated parts of Iceland and Cumbria.
The polar ice caps of Mars show geologic evidence of glacial deposits. The south polar cap is especially comparable to glaciers on Earth. Topographical features and computer models indicate the existence of more glaciers in Mars' past.
At mid-latitudes, between 35° and 65° north or south, Martian glaciers are affected by the thin Martian atmosphere. Because of the low atmospheric pressure, ablation near the surface is solely due to sublimation, not melting. As on Earth, many glaciers are covered with a layer of rocks which insulates the ice. A radar instrument on board the Mars Reconnaissance Orbiter found ice under a thin layer of rocks in formations called lobate debris aprons (LDAs).
The pictures below illustrate how landscape features on Mars closely resemble those on the Earth.
Romer Lake's Elephant Foot Glacier in the Earth's Arctic, as seen by Landsat 8. This picture shows several glaciers that have the same shape as many features on Mars that are believed to also be glaciers. The next three images from Mars show shapes similar to the Elephant Foot Glacier.
Glacier as seen by HiRISE under the HiWish program. Area in the rectangle is enlarged in the next photo. Zone of accumulation of snow at the top. Glacier is moving down valley, then spreading out on plain. Evidence for flow comes from the many lines on surface. Location is in Protonilus Mensae in Ismenius Lacus quadrangle.
Enlargement of area in rectangle of the previous image. On Earth, the ridge would be called the terminal moraine of an alpine glacier. Picture taken with HiRISE under the HiWish program. Image from Ismenius Lacus quadrangle.
- Post, Austin; LaChapelle, Edward R (2000). Glacier ice. Seattle: University of Washington Press. ISBN 978-0-295-97910-6.
- National Geographic Almanac of Geography, 2005, ISBN 0-7922-3877-X, p. 149.
- "170'000 km cube d'eau dans les glaciers du monde". ArcInfo. Aug 6, 2015. Archived from the original on August 17, 2017.
- Brown, Molly Elizabeth; Ouyang, Hua; Habib, Shahid; Shrestha, Basanta; Shrestha, Mandira; Panday, Prajjwal; Tzortziou, Maria; Policelli, Frederick; Artan, Guleid; Giriraj, Amarnath; Bajracharya, Sagar R.; Racoviteanu, Adina. "HIMALA: Climate Impacts on Glaciers, Snow, and Hydrology in the Himalayan Region". Mountain Research and Development. International Mountain Society. hdl:2060/20110015312.
- Simpson, D.P. (1979). Cassell's Latin Dictionary (5 ed.). London: Cassell Ltd. p. 883. ISBN 978-0-304-52257-6.
- "Glossary of Glacier Terminology". USGS. Retrieved 2017-03-13.
- "Retreat of Alaskan glacier Juneau icefield". Nichols.edu. Retrieved 2009-01-05.
- "Glossary of Meteorology". American Meteorological Society. Archived from the original on 2012-06-23. Retrieved 2013-01-04.
- Department of Geography and Geology, University of Wisconsin (2015). "Morphological Classification of Glaciers" (PDF). www.uwsp.edu/Pages/default.aspx.
- "Sea Level and Climate". USGS FS 002-00. USGS. 2000-01-31. Retrieved 2009-01-05.
- "Types of Glaciers". National Snow and Ice Data Center. Archived from the original on 2010-04-17.
- Bindschadler, R.A.; Scambos, T.A. (1991). "Satellite-image-derived velocity field of an Antarctic ice stream". Science. 252 (5003): 242–46. Bibcode:1991Sci...252..242B. doi:10.1126/science.252.5003.242. PMID 17769268.
- "Description of Ice Streams". British Antarctic Survey. Archived from the original on 2009-02-11. Retrieved 2009-01-26.
- "What types of glaciers are there? | National Snow and Ice Data Center". nsidc.org. Retrieved 2017-08-12.
- Lorrain, Reginald D.; Fitzsimons, Sean J. (2017). "Cold-Based Glaciers". In Singh, Vijay P.; Singh, Pratap; Haritashya, Umesh K. (eds.). Encyclopedia of Snow, Ice and Glaciers. Encyclopedia of Earth Sciences Series. Springer Netherlands. pp. 157–161. doi:10.1007/978-90-481-2642-2_72. ISBN 978-90-481-2641-5.
- Boulton, G.S.  "Processes and patterns of glacial erosion", (In Coates, D.R. ed., Glacial Geomorphology. A Proceedings Volume of the Fifth Annual Geomorphology Symposia Series, held at Binghamton, New York, September 26–28, 1974. Binghamton, NY, State University of New York, pp. 41–87. (Publications in Geomorphology))
- "What causes the blue color that sometimes appears in snow and ice?". Webexhibits.org. Retrieved 2013-01-04.
- Benson, C.S., 1961, "Stratigraphic studies in the snow and firn of the Greenland Ice Sheet", Res. Rep. 70, U.S. Army Snow, Ice and Permafrost Res Establ., Corps of Eng., 120 pp.
- "Glacier change and related hazards in Switzerland". UNEP. Archived from the original on 2012-09-25. Retrieved 2009-01-05.
- Paul, Frank; Kääb, Andreas; Maisch, Max; Kellenberger, Tobias; Haeberli, Wilfried (2004). "Rapid disintegration of Alpine glaciers observed with satellite data" (PDF). Geophysical Research Letters. 31 (21): L21402. Bibcode:2004GeoRL..3121402P. doi:10.1029/2004GL020816.
- "Recent Global Glacier Retreat Overview" (PDF). Retrieved 2013-01-04.
- Greve, R.; Blatter, H. (2009). Dynamics of Ice Sheets and Glaciers. Springer. doi:10.1007/978-3-642-03415-2. ISBN 978-3-642-03414-5.
- W.S.B. Paterson, Physics of ice
- Clarke, Garry K.C. (1987). "A short history of scientific investigations on glaciers". Journal of Glaciology. Special issue (S1): 4–5. Bibcode:1987JGlac..33S...4C. doi:10.3189/S0022143000215785.
- "Moulin 'Blanc': NASA Expedition Probes Deep Within a Greenland Glacier". NASA. 2006-12-11. Retrieved 2009-01-05.
- "Glaciers". www.geo.hunter.cuny.edu. Archived from the original on 2014-02-22. Retrieved 2014-02-06.
- T. Strozzi et al.: The Evolution of a Glacier Surge Observed with the ERS Satellites (pdf, 1.3 Mb)
- "The Brúarjökull Project: Sedimentary environments of a surging glacier. The Brúarjökull Project research idea". Hi.is. Retrieved 2013-01-04.
- Meier & Post (1969)
- "Seasonality and Increasing Frequency of Greenland Glacial Earthquakes" Archived 2008-10-07 at the Wayback Machine, Ekström, G., M. Nettles, and V.C. Tsai (2006) Science, 311, 5768, 1756–1758, doi:10.1126/science.1122112
- "Analysis of Glacial Earthquakes" Archived 2008-10-07 at the Wayback Machine Tsai, V. C. and G. Ekström (2007). J. Geophys. Res., 112, F03S22, doi:10.1029/2006JF000596
- Summerfield, Michael A. (1991). Global Geomorphology. p. 269.
- Easterbrook, D.J. (1999). Surface Processes and Landforms (2 ed.). New Jersey: Prentice-Hall, Inc. p. 546. ISBN 978-0-13-860958-0.
- "Glossary of Glacier Terminology". Pubs.usgs.gov. 2012-06-20. Retrieved 2013-01-04.
- Grunewald, p. 129.
- "C.D. Ollier: Australian Landforms and their History, National Mapping Fab, Geoscience Australia". Ga.gov.au. 2010-11-18. Archived from the original on 2008-08-08. Retrieved 2013-01-04.
- Kincaid, Joni L.; Klein, Andrew G. (2004). Retreat of the Irian Jaya Glaciers from 2000 to 2002 as Measured from IKONOS Satellite Images (PDF). Portland, Maine, USA. pp. 147–157. Retrieved 2009-01-05.
- "Hawaiian Glaciers Reveal Clues to Global Climate Change". Geology.com. 2007-01-26. Archived from the original on 2013-01-27. Retrieved 2013-01-04.
- "French Colonies – Crozet Archipelago". Discoverfrance.net. 2010-12-09. Retrieved 2013-01-04.
- Collins, Henry Hill; Europe and the USSR; p. 263. OCLC 1573476
- "Yukon Beringia Interpretive Center". Beringia.com. 1999-04-12. Archived from the original on 2012-10-31. Retrieved 2013-01-04.
- "Earth History 2001" (PDF). July 28, 2017. p. 15. Archived from the original (PDF) on March 3, 2016. Retrieved July 28, 2017.
- "On the Zoogeography of the Holarctic Region". Wku.edu. Retrieved 2013-01-04.
- Dühnforth, Miriam; Anderson, Robert S.; Ward, Dylan; Stock, Greg M. (2010-05-01). "Bedrock fracture control of glacial erosion processes and rates". Geology. 38 (5): 423–426. Bibcode:2010Geo....38..423D. doi:10.1130/G30576.1. ISSN 0091-7613.
- Koppes, Michéle; Hallet, Bernard; Rignot, Eric; Mouginot, Jérémie; Wellner, Julia Smith; Boldt, Katherine (2015). "Observed latitudinal variations in erosion as a function of glacier dynamics". Nature. 526 (7571): 100–103. Bibcode:2015Natur.526..100K. doi:10.1038/nature15385. PMID 26432248.
-  Glacial Landforms: Trough
- 'Glaciers & Glaciation' (Arnold, London 1998) Douglas Benn and David Evans, pp324-326
- "Kettle geology". Britannica Online. Retrieved 2009-03-12.
- Casper, Julie Kerr (2010). Global Warming Cycles: Ice Ages and Glacial Retreat. Infobase Publishing. ISBN 978-0-8160-7262-0.
- "Kargel, J.S. et al.:Martian Polar Ice Sheets and Mid-Latitude Debris-Rich Glaciers, and Terrestrial Analogs, Third International Conference on Mars Polar Science and Exploration, Alberta, Canada, October 13–17, 2003 (pdf 970 Kb)" (PDF). Retrieved 2013-01-04.
- "Martian glaciers: did they originate from the atmosphere? ESA Mars Express, 20 January 2006". Esa.int. 2006-01-20. Retrieved 2013-01-04.
- Head, J. et al. 2005. Tropical to mid-latitude snow and ice accumulation, flow and glaciation on Mars. Nature: 434. 346–350
- Source: Brown University Posted Monday, October 17, 2005 (2005-10-17). "Mars' climate in flux: Mid-latitude glaciers | SpaceRef – Your Space Reference". Marstoday.com. Archived from the original on December 5, 2012. Retrieved 2013-01-04.CS1 maint: multiple names: authors list (link)
- Richard Lewis (2008-04-23). "Glaciers Reveal Martian Climate Has Been Recently Active | Brown University News and Events". News.brown.edu. Retrieved 2013-01-04.
- Plaut, J. et al. 2008. Radar Evidence for Ice in Lobate Debris Aprons in the Mid-Northern Latitudes of Mars. Lunar and Planetary Science XXXIX. 2290.pdf
- Holt, J. et al. 2008. Radar Sounding Evidence for Ice within Lobate Debris Aprons near Hellas Basin, Mid-Southern Latitudes of Mars. Lunar and Planetary Science XXXIX. 2441.pdf
- This article draws heavily on the corresponding article in the Spanish-language Wikipedia, which was accessed in the version of 24 July 2005.
- Hambrey, Michael; Alean, Jürg (2004). Glaciers (2nd ed.). Cambridge University Press. ISBN 978-0-521-82808-6. OCLC 54371738. An excellent less-technical treatment of all aspects, with superb photographs and firsthand accounts of glaciologists' experiences. All images of this book can be found online (see Weblinks: Glaciers-online)
- Benn, Douglas I.; Evans, David J.A. (1999). Glaciers and Glaciation. Arnold. ISBN 978-0-470-23651-2. OCLC 38329570.
- Bennett, M.R.; Glasser, N.F. (1996). Glacial Geology: Ice Sheets and Landforms. John Wiley & Sons. ISBN 978-0-471-96344-8. OCLC 33359888.
- Hambrey, Michael (1994). Glacial Environments. University of British Columbia Press, UCL Press. ISBN 978-0-7748-0510-0. OCLC 30512475. An undergraduate-level textbook.
- Knight, Peter G (1999). Glaciers. Cheltenham: Nelson Thornes. ISBN 978-0-7487-4000-0. OCLC 42656957. A textbook for undergraduates avoiding mathematical complexities
- Walley, Robert (1992). Introduction to Physical Geography. Wm. C. Brown Publishers. A textbook devoted to explaining the geography of our planet.
- W.S.B. Paterson (1994). Physics of Glaciers (3rd ed.). Pergamon Press. ISBN 978-0-08-013972-2. OCLC 26188. A comprehensive reference on the physical principles underlying formation and behavior.
|The Wikibook Historical Geology has a page on the topic of: Glaciers|
|Wikimedia Commons has media related to Glacier.|
|Look up glacier in Wiktionary, the free dictionary.|
- "Global Glacier Changes: Facts and Figures". United Nations Environment Programme (UNEP). 2008. Archived from the original on 2018-12-25. Retrieved 2014-11-10., a report in the Global Environment Outlook (GEO) series.
- Glacial structures – photo atlas
- NOW on PBS "On Thin Ice"
- Photo project tracks changes in Himalayan glaciers since 1921
- Short radio episode California Glaciers from The Mountains of California by John Muir, 1894. California Legacy Project
- Dyanamics of Glaciers
- GletscherVergleiche.ch – Before/After Images by Simon Oberli