Convection is the transfer of heat due to the bulk movement of molecules within fluids (gases and liquids), including molten rock (rheid). Convection includes sub-mechanisms of advection (directional bulk-flow transfer of heat), and diffusion (non-directional transfer of energy or mass particles along a concentration gradient).
Convection cannot take place in most solids because neither bulk current flows nor significant diffusion of matter can take place. Diffusion of heat takes place in rigid solids, but that is called heat conduction. Convection, additionally may take place in soft solids or mixtures where solid particles can move past each other.
Thermal convection can be demonstrated by placing a heat source (e.g. a Bunsen burner) at the side of a glass filled with a liquid, and observing the changes in temperature in the glass caused by the warmer fluid circulating into cooler areas.
Convective heat transfer is one of the major types of heat transfer, and convection is also a major mode of mass transfer in fluids. Convective heat and mass transfer takes place both by diffusion – the random Brownian motion of individual particles in the fluid – and by advection, in which matter or heat is transported by the larger-scale motion of currents in the fluid. In the context of heat and mass transfer, the term "convection" is used to refer to the combined effects of advective and diffusive transfer. Sometimes the term "convection" is used to refer specifically to "free heat convection" (natural heat convection) where bulk-flow in a fluid is due to temperature-induced differences in buoyancy, as opposed to "forced heat convection" where forces other than buoyancy (such as pump or fan) move the fluid. However, in mechanics, the correct use of the word "convection" is the more general sense, and different types of convection should be further qualified, for clarity.
Convection can be qualified in terms of being natural, forced, gravitational, granular, or thermomagnetic. It may also be said to be due to combustion, capillary action, or Marangoni and Weissenberg effects. Heat transfer by natural convection plays a role in the structure of Earth's atmosphere, its oceans, and its mantle. Discrete convective cells in the atmosphere can be seen as clouds, with stronger convection resulting in thunderstorms. Natural convection also plays a role in stellar physics.
The word convection may have slightly different but related usages in different scientific or engineering contexts or applications. The broader sense is in fluid mechanics, where convection refers to the motion of fluid regardless of cause. However, in thermodynamics "convection" often refers specifically to heat transfer by convection.
Examples and applicationsEdit
Convection occurs on a large scale in atmospheres, oceans, planetary mantles, and it provides the mechanism of heat transfer for a large fraction of the outermost interiors of our sun and all stars. Fluid movement during convection may be invisibly slow, or it may be obvious and rapid, as in a hurricane. On astronomical scales, convection of gas and dust is thought to occur in the accretion disks of black holes, at speeds which may closely approach that of light.
Convective heat transfer is a mechanism of heat transfer occurring because of bulk motion (observable movement) of fluids. Heat is the entity of interest being advected (carried), and diffused (dispersed). This can be contrasted with conductive heat transfer, which is the transfer of energy by vibrations at a molecular level through a solid or fluid, and radiative heat transfer, the transfer of energy through electromagnetic waves.
Heat is transferred by convection in numerous examples of naturally occurring fluid flow, such as wind, oceanic currents, and movements within the Earth's mantle. Convection is also used in engineering practices of homes, industrial processes, cooling of equipment, etc.
The rate of convective heat transfer may be improved by the use of a heat sink, often in conjunction with a fan. For instance, a typical computer CPU will have a purpose-made fan to ensure its operating temperature is kept within tolerable limits.
A convection cell, also known as a Bénard cell is a characteristic fluid flow pattern in many convection systems. A rising body of fluid typically loses heat because it encounters a colder surface. In liquid, this occurs because it exchanges heat with colder liquid through direct exchange. In the example of the Earth's atmosphere, this occurs because it radiates heat. Because of this heat loss the fluid becomes denser than the fluid underneath it, which is still rising. Since it cannot descend through the rising fluid, it moves to one side. At some distance, its downward force overcomes the rising force beneath it, and the fluid begins to descend. As it descends, it warms again and the cycle repeats itself.
Atmospheric circulation is the large-scale movement of air, and is a means by which thermal energy is distributed on the surface of the Earth, together with the much slower (lagged) ocean circulation system. The large-scale structure of the atmospheric circulation varies from year to year, but the basic climatological structure remains fairly constant.
Latitudinal circulation occurs because incident solar radiation per unit area is highest at the heat equator, and decreases as the latitude increases, reaching minima at the poles. It consists of two primary convection cells, the Hadley cell and the polar vortex, with the Hadley cell experiencing stronger convection due to the release of latent heat energy by condensation of water vapor at higher altitudes during cloud formation.
Longitudinal circulation, on the other hand, comes about because the ocean has a higher specific heat capacity than land (and also thermal conductivity, allowing the heat to penetrate further beneath the surface ) and thereby absorbs and releases more heat, but the temperature changes less than land. This brings the sea breeze, air cooled by the water, ashore in the day, and carries the land breeze, air cooled by contact with the ground, out to sea during the night. Longitudinal circulation consists of two cells, the Walker circulation and El Niño / Southern Oscillation.
Some more localized phenomena than global atmospheric movement are also due to convection, including wind and some of the hydrologic cycle. For example, a foehn wind is a down-slope wind which occurs on the downwind side of a mountain range. It results from the adiabatic warming of air which has dropped most of its moisture on windward slopes. Because of the different adiabatic lapse rates of moist and dry air, the air on the leeward slopes becomes warmer than at the same height on the windward slopes.
A thermal column (or thermal) is a vertical section of rising air in the lower altitudes of the Earth's atmosphere. Thermals are created by the uneven heating of the Earth's surface from solar radiation. The Sun warms the ground, which in turn warms the air directly above it. The warmer air expands, becoming less dense than the surrounding air mass, and creating a thermal low. The mass of lighter air rises, and as it does, it cools by expansion at lower air pressures. It stops rising when it has cooled to the same temperature as the surrounding air. Associated with a thermal is a downward flow surrounding the thermal column. The downward moving exterior is caused by colder air being displaced at the top of the thermal. Another convection-driven weather effect is the sea breeze.
Warm air has a lower density than cool air, so warm air rises within cooler air, similar to hot air balloons. Clouds form as relatively warmer air carrying moisture rises within cooler air. As the moist air rises, it cools, causing some of the water vapor in the rising packet of air to condense. When the moisture condenses, it releases energy known as latent heat of condensation which allows the rising packet of air to cool less than its surrounding air, continuing the cloud's ascension. If enough instability is present in the atmosphere, this process will continue long enough for cumulonimbus clouds to form, which support lightning and thunder. Generally, thunderstorms require three conditions to form: moisture, an unstable airmass, and a lifting force (heat).
All thunderstorms, regardless of type, go through three stages: the developing stage, the mature stage, and the dissipation stage. The average thunderstorm has a 24 km (15 mi) diameter. Depending on the conditions present in the atmosphere, these three stages take an average of 30 minutes to go through.
Solar radiation affects the oceans: warm water from the Equator tends to circulate toward the poles, while cold polar water heads towards the Equator. The surface currents are initially dictated by surface wind conditions. The trade winds blow westward in the tropics, and the westerlies blow eastward at mid-latitudes. This wind pattern applies a stress to the subtropical ocean surface with negative curl across the Northern Hemisphere, and the reverse across the Southern Hemisphere. The resulting Sverdrup transport is equatorward. Because of conservation of potential vorticity caused by the poleward-moving winds on the subtropical ridge's western periphery and the increased relative vorticity of poleward moving water, transport is balanced by a narrow, accelerating poleward current, which flows along the western boundary of the ocean basin, outweighing the effects of friction with the cold western boundary current which originates from high latitudes. The overall process, known as western intensification, causes currents on the western boundary of an ocean basin to be stronger than those on the eastern boundary.
As it travels poleward, warm water transported by strong warm water current undergoes evaporative cooling. The cooling is wind driven: wind moving over water cools the water and also causes evaporation, leaving a saltier brine. In this process, the water becomes saltier and denser. and decreases in temperature. Once sea ice forms, salts are left out of the ice, a process known as brine exclusion. These two processes produce water that is denser and colder. The water across the northern Atlantic ocean becomes so dense that it begins to sink down through less salty and less dense water. (The convective action is not unlike that of a lava lamp.) This downdraft of heavy, cold and dense water becomes a part of the North Atlantic Deep Water, a southgoing stream.
Mantle convection is the slow creeping motion of Earth's rocky mantle caused by convection currents carrying heat from the interior of the earth to the surface. It is one of 3 driving forces that causes tectonic plates to move around the Earth's surface.
The Earth's surface is divided into a number of tectonic plates that are continuously being created and consumed at their opposite plate boundaries. Creation (accretion) occurs as mantle is added to the growing edges of a plate. This hot added material cools down by conduction and convection of heat. At the consumption edges of the plate, the material has thermally contracted to become dense, and it sinks under its own weight in the process of subduction at an ocean trench. This subducted material sinks to some depth in the Earth's interior where it is prohibited from sinking further. The subducted oceanic crust triggers volcanism.
The Stack effect or chimney effect is the movement of air into and out of buildings, chimneys, flue gas stacks, or other containers due to buoyancy. Buoyancy occurs due to a difference in indoor-to-outdoor air density resulting from temperature and moisture differences. The greater the thermal difference and the height of the structure, the greater the buoyancy force, and thus the stack effect. The stack effect helps drive natural ventilation and infiltration. Some cooling towers operate on this principle; similarly the solar updraft tower is a proposed device to generate electricity based on the stack effect.
The convection zone of a star is the range of radii in which energy is transported primarily by convection.
Granules on the photosphere of the Sun are the visible tops of convection cells in the photosphere, caused by convection of plasma in the photosphere. The rising part of the granules is located in the center where the plasma is hotter. The outer edge of the granules is darker due to the cooler descending plasma. A typical granule has a diameter on the order of 1,000 kilometers and each lasts 8 to 20 minutes before dissipating. Below the photosphere is a layer of much larger "supergranules" up to 30,000 kilometers in diameter, with lifespans of up to 24 hours.
A convection oven is an oven that has fans to circulate air around food, using the convection mechanism to cook food faster than a conventional oven. Convection ovens distribute heat evenly around the food, removing the blanket of cooler air that surrounds food when it is first placed in an oven and allowing food to cook more evenly in less time and at a lower temperature than in a conventional oven. A convection oven has a fan with a heating element around it. A small fan circulates the air in the cooking chamber.
Convection may happen in fluids at all scales larger than a few atoms. There are a variety of circumstances in which the forces required for natural and forced convection arise, leading to different types of convection, described below. In broad terms, convection arises because of body forces acting within the fluid, such as gravity.
The causes of convection are generally described as one of either "natural" ("free") or "forced", although other mechanisms also exist (discussed below). However, the distinction between natural and forced convection is particularly important for convective heat transfer.
Natural convection, or free convection, occurs due to temperature differences which affect the density, and thus relative buoyancy, of the fluid. Heavier (denser) components will fall, while lighter (less dense) components rise, leading to bulk fluid movement. Natural convection can only occur, therefore, in a gravitational field. A common example of natural convection is the rise of smoke from a fire. It can be seen in a pot of boiling water in which the hot and less-dense water on the bottom layer moves upwards in plumes, and the cool and more dense water near the top of the pot likewise sinks.
Natural convection will be more likely and more rapid with a greater variation in density between the two fluids, a larger acceleration due to gravity that drives the convection or a larger distance through the convecting medium. Natural convection will be less likely and less rapid with more rapid diffusion (thereby diffusing away the thermal gradient that is causing the convection) or a more viscous (sticky) fluid.
The onset of natural convection can be determined by the Rayleigh number (Ra).
Note that differences in buoyancy within a fluid can arise for reasons other than temperature variations, in which case the fluid motion is called gravitational convection (see below). However, all types of buoyant convection, including natural convection, do not occur in microgravity environments. All require the presence of an environment which experiences g-force (proper acceleration).
In forced convection, also called heat advection, fluid movement results from external surface forces such as a fan or pump. Forced convection is typically used to increase the rate of heat exchange. Many types of mixing also utilize forced convection to distribute one substance within another. Forced convection also occurs as a by-product to other processes, such as the action of a propeller in a fluid or aerodynamic heating. Fluid radiator systems, and also heating and cooling of parts of the body by blood circulation, are other familiar examples of forced convection.
Forced convection may happen by natural means, such as when the heat of a fire causes expansion of air and bulk air flow by this means. In microgravity, such flow (which happens in all directions) along with diffusion is the only means by which fires are able to draw in fresh oxygen to maintain themselves. The shock wave that transfers heat and mass out of explosions is also a type of forced convection.
Although forced convection from thermal gas expansion in zero-g does not fuel a fire as well as natural convection in a gravity field, some types of artificial forced convection are far more efficient than free convection, as they are not limited by natural mechanisms. For instance, a convection oven works by forced convection, as a fan which rapidly circulates hot air forces heat into food faster than would naturally happen due to simple heating without the fan.
Gravitational or buoyant convectionEdit
Gravitational convection is a type of natural convection induced by buoyancy variations resulting from material properties other than temperature. Typically this is caused by a variable composition of the fluid. If the varying property is a concentration gradient, it is known as solutal convection. For example, gravitational convection can be seen in the diffusion of a source of dry salt downward into wet soil due to the buoyancy of fresh water in saline.
Variable salinity in water and variable water content in air masses are frequent causes of convection in the oceans and atmosphere which do not involve heat, or else involve additional compositional density factors other than the density changes from thermal expansion (see thermohaline circulation). Similarly, variable composition within the Earth's interior which has not yet achieved maximal stability and minimal energy (in other words, with densest parts deepest) continues to cause a fraction of the convection of fluid rock and molten metal within the Earth's interior (see below).
Gravitational convection, like natural thermal convection, also requires a g-force environment in order to occur.
Vibration-induced convection occurs in powders and granulated materials in containers subject to vibration where an axis of vibration is parallel to the force of gravity. When the container accelerates upward, the bottom of the container pushes the entire contents upward. In contrast, when the container accelerates downward, the sides of the container push the adjacent material downward by friction, but the material more remote from the sides is less affected. The net result is a slow circulation of particles downward at the sides, and upward in the middle.
If the container contains particles of different sizes, the downward-moving region at the sides is often narrower than the largest particles. Thus, larger particles tend to become sorted to the top of such a mixture. This is one possible explanation of the Brazil nut effect.
Solid-state convection in iceEdit
Thermomagnetic convection can occur when an external magnetic field is imposed on a ferrofluid with varying magnetic susceptibility. In the presence of a temperature gradient this results in a nonuniform magnetic body force, which leads to fluid movement. A ferrofluid is a liquid which becomes strongly magnetized in the presence of a magnetic field.
This form of heat transfer can be useful for cases where conventional convection fails to provide adequate heat transfer, e.g., in miniature microscale devices or under reduced gravity conditions.
Capillary action is a phenomenon where liquid spontaneously rises in a narrow space such as a thin tube, or in porous materials. This effect can cause liquids to flow against the force of gravity. It occurs because of inter-molecular attractive forces between the liquid and solid surrounding surfaces; If the diameter of the tube is sufficiently small, then the combination of surface tension and forces of adhesion between the liquid and container act to lift the liquid.
The Marangoni effect is the convection of fluid along an interface between dissimilar substances because of variations in surface tension. Surface tension can vary because of inhomogeneous composition of the substances or the temperature-dependence of surface tension forces. In the latter case the effect is known as thermo-capillary convection.
A well-known phenomenon exhibiting this type of convection is the "tears of wine".
The Weissenberg effect is a phenomenon that occurs when a spinning rod is placed into a solution of liquid polymer. Entanglements cause the polymer chains to be drawn towards the rod instead of being thrown outward as would happen with an ordinary fluid (i.e., water).
In a zero-gravity environment, there can be no buoyancy forces, and thus no natural (free) convection possible, so flames in many circumstances without gravity smother in their own waste gases. However, flames may be maintained with any type of forced convection (breeze); or (in high oxygen environments in "still" gas environments) entirely from the minimal forced convection that occurs as heat-induced expansion (not buoyancy) of gases allows for ventilation of the flame, as waste gases move outward and cool, and fresh high-oxygen gas moves in to take up the low pressure zones created when flame-exhaust water condenses.
Mathematical models of convectionEdit
Quantifying natural versus forced convectionEdit
In cases of mixed convection (natural and forced occurring together) one would often like to know how much of the convection is due to external constraints, such as the fluid velocity in the pump, and how much is due to natural convection occurring in the system.
The relative magnitudes of the Grashof number and the square of the Reynolds number determine which form of convection dominates. If , forced convection may be neglected, whereas if , natural convection may be neglected. If the ratio, known as the Richardson number, is approximately one, then both forced and natural convection need to be taken into account.
- Bénard cells
- Convection oven
- Churchill–Bernstein equation
- Combined forced and natural convection
- Double diffusive convection
- Fluid dynamics
- Heat transfer
- Radiation properties
- Heat pipe
- Laser-heated pedestal growth
- Nusselt number
- Thermomagnetic convection
- Vortex tube
- Incropera, Frank P.; DeWitt, David P. (1990). Fundamentals of Heat and Mass Transfer (3rd ed.). John Wiley & Sons. p. 28. ISBN 978-0-471-51729-0. See Table 1.5
- Munson, Bruce R. (1990). Fundamentals of Fluid Mechanics. John Wiley & Sons. ISBN 978-0-471-85526-2.
- Falkovich, G. (2011). Fluid Mechanics, a short course for physicists. Cambridge University Press. ISBN 978-1-107-00575-4. Archived from the original on 2012-01-20.
- Çengel, Yunus A.; Boles, Michael A. Thermodynamics:An Engineering Approach. McGraw-Hill Education. ISBN 978-0-07-121688-3.
- Çengel, Yunus A. (2003). Heat transfer-A Practical Approach (2nd ed.). McGraw Hill Professional. p. 26. ISBN 978-0-07-245893-0.
- Pidwirny, Michael (2008). "CHAPTER 8: Introduction to the Hydrosphere (e). Cloud Formation Processes". Physical Geography. Archived from the original on 2008-12-20. Retrieved 2009-01-01.
- "What is a monsoon?". National Weather Service Western Region Headquarters. National Weather Service Forecast Office in Tucson, Arizona. 2008. Archived from the original on 2012-06-23. Retrieved 2009-03-08.
- Hahn, Douglas G.; Manabe, Syukuro (1975). <1515:TROMIT>2.0.CO;2 "The Role of Mountains in the South Asian Monsoon Circulation". Journal of the Atmospheric Sciences. 32 (8): 1515–1541. Bibcode:1975JAtS...32.1515H. doi:10.1175/1520-0469(1975)032<1515:TROMIT>2.0.CO;2. ISSN 1520-0469.
- University of Wisconsin. Sea and Land Breezes. Archived 2012-07-04 at the Wayback Machine Retrieved on 2006-10-24.
- JetStream: An Online School For Weather (2008). The Sea Breeze. Archived 2006-09-23 at the Wayback Machine National Weather Service. Retrieved on 2006-10-24.
- Frye, Albert Irvin (1913). Civil engineers' pocket book: a reference-book for engineers, contractors. D. Van Nostrand Company. p. 462. Retrieved 2009-08-31.
- Deng, Yikne (2005). Ancient Chinese Inventions. Chinese International Press. pp. 112–13. ISBN 978-7-5085-0837-5. Retrieved 2009-06-18.
- "Fog And Stratus – Meteorological Physical Background". Zentralanstalt für Meteorologie und Geodynamik. FMI. 2007. Archived from the original on 2011-07-06. Retrieved 2009-02-07.
- Mooney, Chris C. (2007). Storm world: hurricanes, politics, and the battle over global warming. Houghton Mifflin Harcourt. p. 20. ISBN 978-0-15-101287-9. Retrieved 2009-08-31.
- Mogil, Michael H. (2007). Extreme Weather. New York: Black Dog & Leventhal Publisher. pp. 210–211. ISBN 978-1-57912-743-5.
- "A Severe Weather Primer: Questions and Answers about Thunderstorms". National Oceanic and Atmospheric Administration. National Severe Storms Laboratory. 2006-10-15. Archived from the original on 2009-08-25. Retrieved 2009-09-01.
- "trade winds". Glossary of Meteorology. American Meteorological Society. 2009. Archived from the original on 2008-12-11. Retrieved 2008-09-08.
- Glossary of Meteorology (2009). Westerlies. Archived 2010-06-22 at the Wayback Machine American Meteorological Society. Retrieved on 2009-04-15.
- Matthias Tomczak and J. Stuart Godfrey (2001). Regional Oceanography: an Introduction. Archived 2009-09-14 at the Wayback Machine Matthias Tomczak, pp. 42. ISBN 81-7035-306-8. Retrieved on 2009-05-06.
- Earthguide (2007). Lesson 6: Unraveling the Gulf Stream Puzzle - On a Warm Current Running North. Archived 2008-07-23 at the Wayback Machine University of California at San Diego. Retrieved on 2009-05-06.
- Angela Colling (2001). Ocean circulation. Archived 2018-03-02 at the Wayback Machine Butterworth-Heinemann, pp. 96. Retrieved on 2009-05-07.
- National Environmental Satellite, Data, and Information Service (2009). Investigating the Gulf Stream. Archived 2010-05-03 at the Wayback Machine North Carolina State University. Retrieved on 2009-05-06.
- Russel, Randy. "Thermohaline Ocean Circulation". University Corporation for Atmospheric Research. Archived from the original on 2009-03-25. Retrieved 2009-01-06.
- Behl, R. "Atlantic Ocean water masses". California State University Long Beach. Archived from the original on May 23, 2008. Retrieved 2009-01-06.
- Kobes, Randy; Kunstatter, Gabor (2002-12-16). "Mantle Convection". Physics Department, University of Winnipeg. Archived from the original on 2011-01-14. Retrieved 2010-01-03.
- Condie, Kent C. (1997). Plate tectonics and crustal evolution (4th ed.). Butterworth-Heinemann. p. 5. ISBN 978-0-7506-3386-4. Archived from the original on 2013-10-29.
- "Definition of CONVECTION OVEN". www.merriam-webster.com.
- Ojakangas, Beatrice. Cooking with Convection" Everything You Need to Know to Get the Most from Your Convection Oven, 2009.
- http://www.smeg.com/faq/ovens/what-s-the-difference-between-fan-and-fan-assisted-ovens/ Archived 2013-05-07 at the Wayback Machine What's the difference between fan and convection ovens? Retrieved on 20 July 2013
- http://service.hoover.co.uk/advice-centre/built-in-appliances/ovens/troubleshooting/ Ovens Advice Centre Retrieved on 20 July 2013
- Cartwright, Julyan H. E.; Piro, Oreste; Villacampa, Ana I. (2002). "Pattern Formation in Solutal Convection: Vermiculated Rolls and Isolated Cells". Physica A: Statistical Mechanics and Its Applications. 314 (1): 291. Bibcode:2002PhyA..314..291C. CiteSeerX 10.1.1.15.8288. doi:10.1016/S0378-4371(02)01080-4.
- Raats, P. A. C. (1969). "Steady Gravitational Convection Induced by a Line Source of Salt in a Soil". Soil Science Society of America Proceedings. 33 (4): 483–487. Bibcode:1969SSASJ..33..483R. doi:10.2136/sssaj1969.03615995003300040005x.
- McKinnon, William B. (2006). "On convection in ice I shells of outer Solar System bodies, with detailed application to Callisto". Icarus. 183 (2): 435–450. Bibcode:2006Icar..183..435M. doi:10.1016/j.icarus.2006.03.004.
- McKinnon, William B. (2006). "On convection in ice I shells of outer Solar System bodies, with detailed application to Callisto". Icarus. 183 (2): 435–450. Bibcode:2006Icar..183..435M. doi:10.1016/j.icarus.2006.03.004.
- Does a candle burn in zero-g? Archived 2008-03-17 at the Wayback Machine
|Wikimedia Commons has media related to Convection.|