# Closure (mathematics)

A set is **closed** under an operation if performance of that operation on members of the set always produces a member of that set. For example, the positive integers are closed under addition, but not under subtraction: is not a positive integer even though both 1 and 2 are positive integers. Another example is the set containing only zero, which is closed under addition, subtraction and multiplication (because , , and ).

Similarly, a set is said to be **closed under a collection of operations** if it is closed under each of the operations individually.

## Basic propertiesEdit

A set that is closed under an operation or collection of operations is said to satisfy a **closure property**. Often a closure property is introduced as an axiom, which is then usually called the **axiom of closure**. Modern set-theoretic definitions usually define operations as maps between sets, so adding closure to a structure as an axiom is superfluous; however in practice operations are often defined initially on a superset of the set in question and a closure proof is required to establish that the operation applied to pairs from that set only produces members of that set. For example, the set of even integers is closed under addition, but the set of odd integers is not.

When a set *S* is not closed under some operations, one can usually find the smallest set containing *S* that is closed. This smallest closed set is called the **closure** of *S* (with respect to these operations).^{[1]} For example, the closure under subtraction of the set of natural numbers, viewed as a subset of the real numbers, is the set of integers. An important example is that of topological closure. The notion of closure is generalized by Galois connection, and further by monads.

The set *S* must be a subset of a closed set in order for the closure operator to be defined. In the preceding example, it is important that the reals are closed under subtraction; in the domain of the natural numbers subtraction is not always defined.

The two uses of the word "closure" should not be confused. The former usage refers to the property of being closed, and the latter refers to the smallest closed set containing one that may not be closed. In short, the closure of a set satisfies a closure property.

## Closed setsEdit

A set is closed under an operation if the operation returns a member of the set when evaluated on members of the set.^{[2]} Sometimes the requirement that the operation be valued in a set is explicitly stated, in which case it is known as the **axiom of closure**. For example, one may define a group as a set with a binary product operator obeying several axioms, including an axiom that the product of any two elements of the group is again an element. However the modern definition of an operation makes this axiom superfluous; an *n*-ary operation on *S* is just a subset of *S*^{n+1}. By its very definition, an operator on a set cannot have values outside the set.

Nevertheless, the closure property of an operator on a set still has some utility. Closure on a set does not necessarily imply closure on all subsets. Thus a subgroup of a group is a subset on which the binary product and the unary operation of inversion satisfy the closure axiom.

An operation of a different sort is that of finding the limit points of a subset of a topological space. A set that is closed under this operation is usually referred to as a closed set in the context of topology. Without any further qualification, the phrase usually means closed in this sense. Closed intervals like [1,2] = {*x* : 1 ≤ *x* ≤ 2} are closed in this sense.

A subset of a partially ordered set is a **downward closed set** (also called a lower set) if for every element of the subset, all smaller elements are also in the subset. This applies for example to the real intervals (−∞, *p*) and (−∞, *p*], and for an ordinal number *p* represented as interval [0, *p*). Every downward closed set of ordinal numbers is itself an ordinal number. **Upward closed sets** (also called upper sets) are defined similarly.

## ExamplesEdit

- In topology and related branches, the relevant operation is taking limits. The topological closure of a set is the corresponding closure operator. The Kuratowski closure axioms characterize this operator.
- In linear algebra, the linear span of a set
*X*of vectors is the**closure**of that set; it is the smallest subset of the vector space that includes*X*and is closed under the operation of linear combination. This subset is a subspace. - In matroid theory, the closure of
*X*is the largest superset of*X*that has the same rank as*X*. - In set theory, the transitive closure of a set.
^{[3]} - In set theory, the transitive closure of a binary relation.
^{[3]} - In algebra, the algebraic closure of a field.
^{[4]} - In commutative algebra, closure operations for ideals, as integral closure and tight closure.
- In geometry, the convex hull of a set
*S*of points is the smallest convex set of which*S*is a subset.^{[5]} - In formal languages, the Kleene closure of a language can be described as the set of strings that can be made by concatenating zero or more strings from that language.
- In group theory, the conjugate closure or normal closure of a set of group elements is the smallest normal subgroup containing the set.
- In mathematical analysis and in probability theory, the closure of a collection of subsets of
*X*under countably many set operations is called the σ-algebra generated by the collection.

## Closure operatorEdit

Given an operation on a set *X*, one can define the closure *C*(*S*) of a subset *S* of *X* to be the smallest subset closed under that operation that contains *S* as a subset, if any such subsets exist. Consequently, *C*(*S*) is the intersection of all closed sets containing *S*. For example, the closure of a subset of a group is the subgroup generated by that set.

The closure of sets with respect to some operation defines a **closure operator** on the subsets of *X*. The closed sets can be determined from the closure operator; a set is closed if it is equal to its own closure. Typical structural properties of all closure operations are: ^{[6]}

- The closure is
**increasing**or**extensive**: the closure of an object contains the object. - The closure is
**idempotent**: the closure of the closure equals the closure. - The closure is
**monotone**, that is, if*X*is contained in*Y*, then also*C*(*X*) is contained in*C*(*Y*).

An object that is its own closure is called **closed**. By idempotency, an object is closed if and only if it is the closure of some object.

These three properties define an **abstract closure operator**. Typically, an abstract closure acts on the class of all subsets of a set.

If *X* is contained in a set closed under the operation then every subset of *X* has a closure.

## Binary relation closuresEdit

Consider first homogeneous relations *R* ⊆ *A* × *A*. If a relation *S* satisfies *aSb* ⇒ *bSa*, then it is a symmetric relation. An arbitrary homogeneous relation *R* may not be symmetric but it is always contained in some symmetric relation: *R* ⊆ *S*. The operation of finding the *smallest* such *S* corresponds to a closure operator called symmetric closure.

A transitive relation *T* satisfies *aTb* ∧ *bTc* ⇒ *aTc*. An arbitrary homogeneous relation *R* may not be transitive but it is always contained in some transitive relation: *R* ⊆ *T*. The operation of finding the *smallest* such *T* corresponds to a closure operator called transitive closure.

Among heterogeneous relations there are properties of *difunctionality* and *contact* which lead to **difunctional closure** and **contact closure**.^{[7]} The presence of these closure operators in binary relations leads to topology since open-set axioms may be replaced by Kuratowski closure axioms. Thus each property *P*, symmetry, transitivity, difunctionality, or contact corresponds to a relational topology.^{[8]}

In the theory of rewriting systems, one often uses more wordy notions such as the **reflexive transitive closure** *R ^{*}*—the smallest preorder containing

*R*, or the

**reflexive transitive symmetric closure**

*R*

^{≡}—the smallest equivalence relation containing

*R*, and therefore also known as the

**equivalence closure**. When considering a particular term algebra, an equivalence relation that is compatible with all operations of the algebra

^{[note 1]}is called a congruence relation. The

**congruence closure**of

*R*is defined as the smallest congruence relation containing

*R*.

For arbitrary *P* and *R*, the *P* closure of *R* need not exist. In the above examples, these exist because reflexivity, transitivity and symmetry are closed under arbitrary intersections. In such cases, the *P* closure can be directly defined as the intersection of all sets with property *P* containing *R*.^{[9]}

Some important particular closures can be constructively obtained as follows:

*cl*_{ref}(*R*) =*R*∪ { ⟨*x*,*x*⟩ :*x*∈*S*} is the reflexive closure of*R*,*cl*_{sym}(*R*) =*R*∪ { ⟨*y*,*x*⟩ : ⟨*x*,*y*⟩ ∈*R*} is its symmetric closure,*cl*_{trn}(*R*) =*R*∪ { ⟨*x*_{1},*x*_{n}⟩ :*n*>1 ∧ ⟨*x*_{1},*x*_{2}⟩, ..., ⟨*x*_{n-1},*x*_{n}⟩ ∈*R*} is its transitive closure,*cl*_{emb,Σ}(*R*) =*R*∪ { ⟨*f*(*x*_{1},…,*x*_{i-1},*x*_{i},*x*_{i+1},…,*x*_{n}),*f*(*x*_{1},…,*x*_{i-1},*y*,*x*_{i+1},…,*x*_{n})⟩ : ⟨*x*_{i},*y*⟩ ∈*R*∧*f*∈ Σ*n*-ary ∧ 1 ≤*i*≤*n*∧*x*_{1},...,*x*_{n}∈*S*} is its embedding closure with respect to a given set Σ of operations on*S*, each with a fixed arity.

The relation *R* is said to have closure under some *cl*_{xxx}, if *R* = *cl*_{xxx}(*R*); for example *R* is called symmetric if *R* = *cl*_{sym}(*R*).

Any of these four closures preserves symmetry, i.e., if *R* is symmetric, so is any *cl*_{xxx}(*R*). ^{[note 2]}
Similarly, all four preserve reflexivity.
Moreover, *cl*_{trn} preserves closure under *cl*_{emb,Σ} for arbitrary Σ.
As a consequence, the equivalence closure of an arbitrary binary relation *R* can be obtained as *cl*_{trn}(*cl*_{sym}(*cl*_{ref}(*R*))), and the congruence closure with respect to some Σ can be obtained as *cl*_{trn}(*cl*_{emb,Σ}(*cl*_{sym}(*cl*_{ref}(*R*)))). In the latter case, the nesting order does matter; e.g. if *S* is the set of terms over Σ = { *a*, *b*, *c*, *f* } and *R* = { ⟨*a*,*b*⟩, ⟨*f*(*b*),*c*⟩ }, then the pair ⟨*f*(*a*),*c*⟩ is contained in the congruence closure *cl*_{trn}(*cl*_{emb,Σ}(*cl*_{sym}(*cl*_{ref}(*R*)))) of *R*, but not in the relation *cl*_{emb,Σ}(*cl*_{trn}(*cl*_{sym}(*cl*_{ref}(*R*)))).

## See alsoEdit

## NotesEdit

## ReferencesEdit

**^**Weisstein, Eric W. "Set Closure".*mathworld.wolfram.com*. Retrieved 2020-07-25.The closure of a set A is the smallest closed set containing A

**^**Weisstein, Eric W. "Set Closure".*mathworld.wolfram.com*. Retrieved 2020-07-25.A set S and a binary operator * are said to exhibit closure if applying the binary operator to two elements S returns a value which is itself a member of S.

- ^
^{a}^{b}Weisstein, Eric W. "Transitive Closure".*mathworld.wolfram.com*. Retrieved 2020-07-25. **^**Weisstein, Eric W. "Algebraic Closure".*mathworld.wolfram.com*. Retrieved 2020-07-25.**^**Bernstein, Dennis S. (2005).*Matrix Mathematics: Theory, Facts, and Formulas with Application to Linear Systems Theory*. Princeton University Press. p. 25. ISBN 978-0-691-11802-4....convex hull of S, denoted by coS, is the smallest convex set containing S.

**^**Birkhoff, Garrett (1967).*Lattice Theory*. Colloquium Publications.**25**. Am. Math. Soc. p. 111. ISBN 9780821889534.**^**Schmidt, Gunter (2011). "Relational Mathematics".*Encyclopedia of Mathematics and its Applications*.**132**. Cambridge University Press. pp. 169, 227. ISBN 978-0-521-76268-7.**^**Schmidt, Gunter; Winter, M. (2018).*Relational Topology*. Lecture Notes in Mathematics.**2208**. Springer Verlag. ISBN 978-3-319-74451-3.**^**Baader, Franz; Nipkow, Tobias (1998).*Term Rewriting and All That*. Cambridge University Press. pp. 8–9. ISBN 9780521779203.