The AMD Bulldozer Family 15h is a microprocessor microarchitecture for the FX and Opteron line of processors, developed by AMD for the desktop and server markets. Bulldozer is the codename for this family of microarchitectures. It was released on October 12, 2011, as the successor to the K10 microarchitecture.
|Architecture and classification|
|Min. feature size||32 nm|
|Products, models, variants|
|Predecessor||Family 10h (K10)|
|Successor||Piledriver - Family 15h (2nd-gen)|
Bulldozer is designed from scratch, not a development of earlier processors. The core is specifically aimed at computing products with TDPs of 10 to 125 watts. AMD claims dramatic performance-per-watt efficiency improvements in high-performance computing (HPC) applications with Bulldozer cores.
The Bulldozer cores support most of the instruction sets implemented by Intel processors (Sandy Bridge) available at its introduction (including SSE4.1, SSE4.2, AES, CLMUL, and AVX) as well as new instruction sets proposed by AMD; ABM, XOP, FMA4 and F16C. Only Bulldozer GEN4 (Excavator) supports AVX2 instruction sets.
According to AMD, Bulldozer-based CPUs are based on GlobalFoundries' 32 nm Silicon on insulator (SOI) process technology and reuses the approach of DEC for multitasking computer performance with the arguments that it, according to press notes, "balances dedicated and shared computer resources to provide a highly compact, high units count design that is easily replicated on a chip for performance scaling." In other words, by eliminating some of the "redundant" elements that naturally creep into multicore designs, AMD has hoped to take better advantage of its hardware capabilities, while using less power.
Bulldozer-based implementations built on 32nm SOI with HKMG arrived in October 2011 for both servers and desktops. The server segment included the dual chip (16-core) Opteron processor codenamed Interlagos (for Socket G34) and single chip (4, 6 or 8 cores) Valencia (for Socket C32), while the Zambezi (4, 6 and 8 cores) targeted desktops on Socket AM3+.
Bulldozer is the first major redesign of AMD’s processor architecture since 2003, when the firm launched its K8 processors, and also features two 128-bit FMA-capable FPUs which can be combined into one 256-bit FPU. This design is accompanied by two integer clusters, each with 4 pipelines (the fetch/decode stage is shared). Bulldozer also introduced shared L2 cache in the new architecture. AMD calls this design a "Module". A 16-core processor design would feature eight of these "modules", but the operating system will recognize each "module" as two logical cores.
The modular architecture consists of multithreaded shared L2 cache and FlexFPU, which uses simultaneous multithreading. Each physical integer core, two per module, is single threaded, in contrast with Intel's Hyperthreading, where two virtual simultaneous threads share the resources of a single physical core.
Bulldozer made use of "Clustered Multithreading" (CMT), a technique where some parts of the processor are shared between two threads and some parts are unique for each thread. Prior examples of such an approach to unconventional multithreading can be traced way back to the 2005 Sun Microsystems' UltraSPARC T1 CPU. In terms of hardware complexity and functionality, a Bulldozer CMT module is equal to a dual-core processor in its integer calculation capabilities, and to either a single-core processor or a handicapped dual-core in terms of floating-point computational power, depending on whether the code is saturated in floating point instructions in both threads running on the same CMT module, and whether the FPU is performing 128-bit or 256-bit floating point operations. The reason for this is that for each two integer cores, that is, within the same module, there is a single floating-point unit consisting of a pair of 128-bit FMAC execution units.
CMT is in some way a simpler but similar design philosophy to SMT; both designs try to utilize execution units efficiently; in either method, when two threads compete for some execution pipelines, there is a loss in performance in one or more of the threads. Due to dedicated integer cores, the Bulldozer family modules performed roughly like a dual-core, dual-threaded processor during sections of code that were either wholly integer or a mix of integer and floating-point calculations; yet, due to the SMT use of the shared floating-point pipelines, the module would perform similarly to a single-core, dual-threaded SMT processor (SMT2) for a pair of threads saturated with floating-point instructions. (Both of these last two comparisons make the assumption that the processor possesses an equally wide and capable execution core, integer-wise and floating-point-wise, respectively.)
Both CMT and SMT are at peak effectiveness while running integer and floating point code on a pair of threads. CMT stays at peak effectiveness while working on a pair of threads consisting both of integer code, while under SMT, one or both threads will underperform due to competition for integer execution units. The disadvantage for CMT is a greater number of idle integer execution units in a single threaded case. In the single threaded case, CMT is limited to use at most half of the integer execution units in its module, while SMT imposes no such limit. A large SMT core with integer circuitry as wide and fast as two CMT cores could in theory have momentarily up to twice an integer performance in a single thread case. (More realistically for general code as a whole, Pollack's Rule estimates a speedup factor of , or approximately 40% increase in performance.)
CMT processors and a typical SMT processor are similar in their efficient shared use of the L2 cache between a pair of threads.
- A module consists of a coupling of two "conventional" x86 out of order processing cores. The processing core shares the early pipeline stages (e.g. L1i, fetch, decode), the FPUs, and the L2 cache with the rest of the module.
- Each module has the following independent hardware resources:
- 16 KB 4-way of L1d (way-predicted) per core and 2-way 64 KB of L1i per module, one way for each of the two cores
- 2 MB of L2 cache per module (shared between the two integer cores)
- Write Coalescing Cache is a special cache that is part of L2 cache in Bulldozer microarchitecture. Stores from both L1D caches in the module go through the WCC, where they are buffered and coalesced. The WCC's task is reducing number of writes to the L2 cache.
- Two dedicated integer cores
- – each one includes two ALU and two AGU which are capable of a total of four independent arithmetic and memory operations per clock and per core
- – duplicating integer schedulers and execution pipelines offers dedicated hardware to each of two threads which double performance for multi-threaded integer loads
- – the second integer core in the module increases the Bulldozer module die by around 12%, which at chip level adds about 5% of total die space
- Two symmetrical 128-bit FMAC (fused multiply–add capability) floating-point pipelines per module that can be unified into one large 256-bit-wide unit if one of the integer cores dispatches AVX instruction and two symmetrical x87/MMX/SSE capable FPPs for backward compatibility with SSE2 non-optimized software. Each FMAC unit is also capable of division and square root operations with variable latency.
- All modules present share the L3 cache as well as an Advanced Dual-Channel Memory Sub-System (IMC – Integrated Memory Controller).
- A module has 213 million transistors in an area of 30.9 mm² (including the 2 MB shared L2 cache) on an Orochi die.
- The pipeline depth of Bulldozer (as well as Piledriver and Steamroller) is 20 cycles, compared to 12 cycles of the K10 core predecessor.
The longer pipeline allowed the Bulldozer family of processors to achieve a much higher clock frequency compared to its K10 predecessors. While this increased frequencies and throughput, the longer pipeline also increased latencies and increased branch misprediction penalties.
- The width of the Bulldozer integer core, four (2 ALU, 2 AGU), is somewhat less than the width of the K10 core, six (3 ALU, 3 AGU). Bobcat and Jaguar also used a four wide integer core, yet with lighter execution units: 1 ALU, 1 simple ALU, 1 load AGU, 1 store AGU.
The issue widths (and peak instruction executions per cycle) of a Jaguar, K10, and Bulldozer core are 2, 3, and 4 respectively. This made Bulldozer a more superscalar design compared to Jaguar/Bobcat. However, due to K10's somewhat wider core (in addition to the lack of refinements and optimizations in a first generation design) the Bulldozer architecture typically performed with somewhat lower IPC compared to its K10 predecessors. It was not until the refinements made in Piledriver and Steamroller, that the IPC of the Bulldozer family distinctly began to exceed that of K10 processors such as Phenom II.
- Two-level Branch Target Buffer(BTB)
- Hybrid predictor for conditionals
- Indirect predictor
Instruction set extensionsEdit
- Support for Intel's Advanced Vector Extensions (AVX) instruction set, which supports 256-Bit floating point operations, and SSE4.1, SSE4.2, AES, CLMUL, as well as future 128-bit instruction sets proposed by AMD (XOP, FMA4, and F16C), which have the same functionality as the SSE5 instruction set formerly proposed by AMD, but with compatibility to the AVX coding scheme.
- Bulldozer GEN4 (Excavator) supports AVX2 instruction sets.
Process technology and clock frequencyEdit
- 11-metal layer 32 nm SOI process with implemented first generation GlobalFoundries's High-K Metal Gate (HKMG)
- Turbo Core 2 performance boost to increase clock frequency up to 500 MHz with all threads active (for most workloads) and up to 1 GHz with the half of the thread active, within the TDP limit.
- The chip operates at 0.775 to 1.425 V, achieving clock frequencies of 3.6 GHz or more
- Min-Max TDP: 25 – 140 watts
Cache and memory interfaceEdit
- Up to 8 MB of L3 shared among all cores on the same silicon die (8 MB for 4 cores in Desktop segment and 16 MB for 8 cores in the Server segment), divided into four subcaches of 2 MB each, capable of operating at 2.2 GHz at 1.1125 V
- Native DDR3 memory support up to DDR3-1866
- Dual Channel DDR3 integrated memory controller for Desktop and Server/Workstation Opteron 42xx "Valencia"; Quad Channel DDR3 Integrated Memory Controller for Server/Workstation Opteron 62xx "Interlagos"
- AMD claims support for two DIMMs of DDR3-1600 per channel. Two DIMMs of DDR3-1866 on a single channel will be down-clocked to 1600.
I/O and socket interfaceEdit
- HyperTransport Technology rev. 3.1 (3.20 GHz, 6.4 GT/s, 25.6 GB/s & 16-bit wide link) [first implemented into HY-D1 revision "Magny-Cours" on the socket G34 Opteron platform in March 2010 and "Lisbon" on the socket C32 Opteron platform in June 2010]
- Socket AM3+ (AM3r2)
- For the server segment, the existing socket G34 (LGA1974) and socket C32 (LGA1207) will be used.
The first revenue shipments of Bulldozer-based Opteron processors was announced on September 7, 2011. The FX-4100, FX-6100, FX-8120 and FX-8150 were released in October 2011; with remaining FX series AMD processors released at the end of the first quarter of 2012.
|Model||Cores/Modules||Frequency||Max. turbo||L2 cache||L3 cache||TDP||Memory||Turbo Core||Socket|
|Full load||Half load|
|FX-8100||8/4||2.8 GHz||3.1 GHz||3.7 GHz||4 × 2 MB||8 MB||95 W||DDR3
|FX-8120||3.1 GHz||3.4 GHz||4.0 GHz||125 W|
|FX-8140||3.2 GHz||3.6 GHz||4.1 GHz||95 W|
|FX-8150||3.6 GHz||3.9 GHz||4.2 GHz||125 W|
|FX-8170||3.9 GHz||4.2 GHz||4.5 GHz|
|FX-6100||6/3||3.3 GHz||3.6 GHz||3.9 GHz||3 × 2 MB||95 W|
|FX-6120||3.6 GHz||3.9 GHz||4.2 GHz|
|FX-6130||3.6 GHz||3.8 GHz||3.9 GHz|
|FX-6200||3.8 GHz||4.0 GHz||4.1 GHz||125 W|
|FX-4100||4/2||3.6 GHz||3.7 GHz||3.8 GHz||2 x 2 MB||95 W|
|FX-4120||3.9 GHz||4.0 GHz||4.1 GHz|
|FX-4130||3.8 GHz||3.9 GHz||4.0 GHz||4 MB||125 W|
|FX-4150||3.8 GHz||3.9 GHz||4.0 GHz||8 MB||95/125 W|
|FX-4170||4.2 GHz||4.3 GHz||4.3 GHz||125 W|
There are two series of Bulldozer-based processors for servers: Opteron 4200 series (Socket C32, code named Valencia, with up to four modules) and Opteron 6200 series (Socket G34, code named Interlagos, with up to 8 modules).
False advertising lawsuitEdit
In November 2015, AMD was sued under the California Consumers Legal Remedies Act and Unfair Competition Law for allegedly misrepresenting the specifications of Bulldozer chips. The class-action lawsuit, filed on 26 October in the US District Court for the Northern District of California, claims that each Bulldozer module is in fact a single CPU core with a few dual-core traits, rather than a true dual-core design. In August 2019, AMD agreed to settle the suit for $12.1M.
Performance on LinuxEdit
On 24 October 2011, the first generation tests done by Phoronix confirmed that the performance of Bulldozer CPU was somewhat less than expected. In many tests the CPU has performed on same level as older generation Phenom 1060T.
Performance on WindowsEdit
The first Bulldozer CPUs were met with a mixed response. It was discovered that the FX-8150 performed poorly in benchmarks that were not highly threaded, falling behind the second-generation Intel Core i* series processors and being matched or even outperformed by AMD's own Phenom II X6 at lower clock speeds. In highly threaded benchmarks, the FX-8150 performed on par with the Phenom II X6, and the Intel Core i7 2600K, depending on the benchmark. Given the overall more consistent performance of the Intel Core i5 2500K at a lower price, these results left many reviewers underwhelmed. The processor was found to be extremely power-hungry under load, especially when overclocked, compared to Intel's Sandy Bridge.
On 13 October 2011, AMD stated on its blog that "there are some in our community who feel the product performance did not meet their expectations", but showed benchmarks on actual applications where it outperformed the Sandy Bridge i7 2600k and AMD X6 1100T.
In January 2012, Microsoft released two hotfixes for Windows 7 and Server 2008 R2 that marginally improve the performance of Bulldozer CPUs by addressing the thread scheduling concerns raised after the release of Bulldozer.
On 6 March 2012, AMD posted a knowledge base article stating that there was a compatibility problem with FX processors, and certain games on the widely used digital game distribution platform, Steam. AMD stated that they had provided a BIOS update to several motherboard manufacturers (namely: Asus, Gigabyte Technology, MSI, and ASRock) that would fix the problem.
In September 2014, AMD CEO Rory Read conceded the Bulldozer design had not been a "game-changing part", and that AMD had to live with the design for four years.
On 31 August 2011, AMD and a group of well-known overclockers including Brian McLachlan, Sami Mäkinen, Aaron Schradin, and Simon Solotko managed to set a new world record for CPU frequency using the unreleased and overclocked FX-8150 Bulldozer processor. Before that day, the record sat at 8.309 GHz, but the Bulldozer combined with liquid helium cooling reached a new high of 8.429 GHz. The record has since been overtaken at 8.58 GHz by Andre Yang using liquid nitrogen. On August 22, 2014 and using an FX-8370 (Piledriver), The Stilt from Team Finland achieved a maximum CPU frequency of 8.722 GHz.
Piledriver is the AMD codename for its improved second-generation microarchitecture based on Bulldozer. AMD Piledriver cores are found in Socket FM2 Trinity and Richland based series of APUs and CPUs and the Socket AM3+ Vishera based FX-series of CPUs. Piledriver was the last generation in the Bulldozer family to be available for socket AM3+ and to be available with an L3 cache. The Piledriver processors available for FM2 (and its mobile variant) sockets did not come with a L3 cache, as the L2 cache is the last-level cache for all FM2/FM2+ processors.
Steamroller is the AMD codename for its third-generation microarchitecture based on an improved version of Piledriver. Steamroller cores are found in the Socket FM2+ Kaveri based series of APUs and CPUs.
- "FX Processors". AMD. 24 February 2016. Retrieved 24 February 2016.
- "AMD ships 16 core bulldozer powered Opteron 6200". Engadget. 14 November 2011. Retrieved 24 February 2016.
- Bulldozer 50% Faster than Core i7 and Phenom II, techPowerUp, retrieved 2012-01-23
- AMD64 Architecture Programmer’s Manual Volume 6: 128-Bit and 256-Bit XOP, and FMA4 Instructions (PDF), AMD, May 1, 2009, retrieved 2009-05-08
- Striking a balance, Dave Christie, AMD Developer blogs, 7 May 2009, retrieved 2009-05-08
- AMD Sets New Mark in x86 Innovation with First Detailed Disclosures of Two New Core Designs, AMD, August 24, 2011, p. 1, retrieved September 18, 2011
- Analyst Day 2009 Summary, AMD, November 11, 2009, retrieved 2009-11-14
- AMD bestätigt: "Zambezi" ist inkompatibel zum Sockel AM3, Planet3dnow.de, retrieved 2012-01-23
- Analyst Day 2009 Presentations, AMD, November 11, 2009, retrieved 2009-11-14
- "AMD unveils Flex FP - bit-tech.net". bit-tech.net.
- Bulldozer microarchitecture block, AnandTech, August 24, 2010
- Bulldozer module functional schematic, AMD, August 24, 2010
- More On Bulldozer, Tomshardware.com, 2010-08-24, retrieved 2012-01-23
- AMD Reveals Details About Bulldozer Microprocessors, AMD Reveals Details About Bulldozer Microprocessors, Xbitlabs.com, retrieved 2012-01-23
- Real World Technologies (2010-08-26), AMD's Bulldozer Microarchitecture, Realworldtech.com, retrieved 2012-01-23
- David Kanter (August 26, 2010). "AMD's Bulldozer Microarchitecture Memory Subsystem Continued". Real World Technologies.
- Bulldozer design power efficiency, AMD, August 24, 2010
- AP (PDF), retrieved 2012-01-23
- Johan De Gelas, The Bulldozer Aftermath: Delving Even Deeper
- Anand Lal Shimpi, AMD’s Jaguar Architecture: The CPU Powering Xbox One, PlayStation 4, Kabini & Temash
- XOP and FMA4 Instruction set in SSE5, Techreport.com, 2009-05-06, retrieved 2012-01-23
- AMD Financial Analyst Day 2010, Server Platforms Presentation, Ir.amd.com, 2010-11-09, retrieved 2012-01-23
- AMD Roadmap, retrieved 2012-01-23
- AMD (2012-05-14), AMD Opteron 4200 Series Processor Quick Reference Guide (PDF), www.amd.com, retrieved 2012-08-15
- AMD (2012-05-14), AMD Opteron 6200 Series Processor Quick Reference Guide (PDF), www.amd.com, retrieved 2012-08-15
- ASUS confirms AM3+ compatibility on AM3 boards, Event.asus.com, retrieved 2012-01-23
- MSI confirms AM3+ compatibility on AM3 boards, Event.msi.com, retrieved 2012-01-23
- AM3 processors will work in the AM3+ socket, but Bulldozer chips will not work in non-AM3+ motherboards Archived December 10, 2010, at the Wayback Machine
- AMD Ships First "Bulldozer" Processors
- AMD FX-Series processor families, Cpu-world.com, 2012-10-02, retrieved 2012-10-21
- Shilov, Anton (2012-09-21). "AMD Sets the FX "Vishera" Launch Date". X-bit laboratories. X-bit labs. Archived from the original on 2012-09-24. Retrieved 2012-09-23.
- What Is Bulldozer?, 2010-08-02, archived from the original on August 6, 2010
- AMD Opteron 6200 series microprocessor family, cpu-world.com
- "AMD sued over allegedly misleading Bulldozer core count". Ars Technica. Retrieved 8 November 2015.
- "AMD Bulldozer 'Core' Lawsuit: AMD Settles for $12.1m, Payouts for Some". AnandTech. Retrieved 24 September 2020.
- "Tony Dickey and Paul Parmer, et al. v. Advanced Micro Devices". Archived from the original on 19 October 2019. Retrieved 24 September 2020.
- AMD FX-8150 Bulldozer On Ubuntu Linux, phoronix.com, 2011-10-24, retrieved 2012-12-13
- AMD Bulldozer Cache Aliasing Issue Fix, phoronix.com
- AMD's FX-8150 Bulldozer Benefits From New Compilers, Tuning, phoronix.com
- Bulldozer Has Arrived: AMD FX-8150 Processor Review, X-bit labs, 2011-10-11, p. 13, retrieved 2012-01-23
- Bulldozer Has Arrived: AMD FX-8150 Processor Review, X-bit labs, 2011-10-11, p. 14, archived from the original on 2012-01-16, retrieved 2012-01-23
- Our Take on AMD FX, 'akozak' on behalf of AMD Blogs, 2011-10-13, archived from the original on 15 October 2011, retrieved 23 January 2012
- An update is available for computers that have an AMD FX, AMD Opteron 4200, AMD Opteron 6200, or AMD Bulldozer series processor installed and that are running Windows 7 or Windows Server 2008 R2, support.microsoft.com, January 2012, retrieved 2014-02-11
- An update that selectively disables the Core Parking feature in Windows 7 or in Windows Server 2008 R2 is available, support.microsoft.com, January 2012, retrieved 2014-02-11
- "AMD's FX-8150 After Two Windows 7 Hotfixes And UEFI Updates". tomshardware.com. 24 January 2012.
- STEAM Games on AMD FX platforms, support.amd.com, 2012-06-12, retrieved 2012-10-11
- "AMD: next-generation microarchitecture will make up for muted Bulldozer reception". pcgamer.com.
- AMD Bulldozer CPU beats world record again achieving 8.461GHz, geek.com, 2011-11-01, retrieved 2012-10-16
- "AMD Bulldozer Speed Record Broken Again at 8.58GHz". tomshardware.com. 5 November 2011.
- Samuel D. "CPU-Z Validator 4.0". Retrieved 23 September 2014.
- The Bulldozer Review: AMD FX-8150 Tested, AnandTech, 2011-10-12, retrieved 2012-01-23
- Cutress, Ian (2016-02-02). "AMD launches excavator on desktop: the 65w athlon x4 845 for $70". anandtech. Retrieved 2017-03-28.