Academic grading in Canada
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)(Learn how and when to remove this template message)
Academic grading in Canada varies by province, level of education (e.g., high school or university), institution (e.g., Wilfrid Laurier University), and faculty. The following are commonly used conversions from percentage grades to letter grades, however, this is not necessarily meaningful, since there is not a uniform scheme for assigning percentage grades either.
This is the system of grading used by grade schools and highschools in BC. Each University has its own way of marking.
I = Incomplete- Missing assignments
F = Fail- Received grade under 50%
W = The student has withdrawn from this course
P = The student has passed this course though a grade is not available ( usally occurs when switching schools/grading systems ie. moving from the US)
In Alberta, academic grading follows a scale of letter grades (A through D), sentences to describe how well one's performance is to the curricular tasks expected of them, and percentages which are typically reserved for high school, college, and university students. These percentages vary from faculty to faculty in universities, as well as among different universities. In most post-secondary institutions, percentages are mainly a suggestion, and not a hard grading system, and even some individual classes can have large deviations from the norm (such as anything below an 80 being a C+ or lower). Letter grades are not used at all in francophone schools; only percentages are used. In francophone schools, from grades 1–9, as well as kindergarten, an alternative grading system is used instead of percentages and letter grades: numbers 1 to 4 are used, with 4 being excellent, 3 being good, 2 being acceptable, and 1 being poor.
Note: not all schools utilize a +/- system when giving grades. Some just give the generic grade.
A: 80%–100% (student has demonstrated exemplary performance related to learning outcomes)
B: 65%–79% (student has demonstrated a proficient performance related to learning outcomes)
C: 50%–64% (student has demonstrated an adequate performance related to learning outcomes )
D: 0%-49% (student has demonstrated a limited performance related to learning outcomes)
IEA: Insufficient Evidence Available: indicates that the teacher of a particular course has not gathered enough evidence of a student's learning and thus, cannot give a grade for said student.
WDR: Withdrawal: indicted the student has withdrew from a particular course and thus, is given no grade because of it.
AMP: Academic Malpractice: Indicates that the student was placed in an incorrect class, whether it be by not having the pre-requiste or did not request the class upon registration. No mark is given.
P: Pass: indicates that the student has achieved the bare minimum grade to pass the class granted by a teacher due to reasons beyond the students control. A grade of P translates into a 50% when used to calculate averages for university or college admission.
A mark of 0%–49%, or a D and under, is a failure for a class and is typically given for high school and post-secondary students only, but can be given to junior high students too, but isn't typically done. A failing grade will also result in not earning credits for an Alberta High School Diploma or for any subject taken in post-secondary, and typically means the student will more than likely repeat the course.
 Letter Grade Interpretation:
A = The student demonstrates excellent or outstanding performance in relation to expected learning outcomes for the course or subject and grade.
B = The student demonstrates very good performance in relation to expected learning outcomes for the course or subject and grade.
C+ = The student demonstrates good performance in relation to expected learning outcomes for the course or subject and grade.
C = The student demonstrates satisfactory performance in relation to expected learning outcomes for the course or subject and grade.
C- = The student demonstrates minimally acceptable performance in relation to expected learning outcomes for the course or subject and grade.
I = (In Progress or Incomplete) The student, for a variety of reasons, is not demonstrating minimally acceptable performance in relation to the expected learning outcomes. An "I" letter grade may only be assigned in accordance with section 3.
F = (Failed) The student has not demonstrated the minimally acceptable performance in relation to the expected learning outcomes for the course or subject and grade. F (Failed) may only be used as a final letter grade if an "I" (In Progress) letter grade has been previously assigned or the "F" is assigned as a result of failing a provincially examinable course.
W = (Withdrawal) According to the policy of the board, and upon request of the parent of the student or, when appropriate, the student, the principal, vice principal or director of instruction in charge of a school may grant permission to a student to withdraw from a course or subject.
SG = (Standing Granted) Although completion of normal requirements is not possible, a sufficient level of performance has been attained to warrant, consistent with the best interests of the student, the granting of standing for the course or subject and grade. Standing Granted may be used in cases of serious illness, hospitalization, late entry or early leaving, but may only be granted by an adjudication process authorized by the principal, vice principal or director of instruction in charge of the school. Standing Granted may not be used for a course with a Required Graduation Program Examination. Standing Granted may not be used for Graduation Transitions.
(TS = Transfer Standing) May be granted by the principal, vice principal or director of instruction in charge of a school on the basis of an examination of records from an institution other than a school as defined in the School Act. Alternatively, the principal, vice principal or director of instruction in charge of a school may assign a letter grade on the basis of an examination of those records.
Many school districts in British Columbia have switched the reporting method from percentages to letter grades for Grades 8–9.
The grading standards for A-letter grades changed in September 2010 to coincide with a new academic year. The new changes require a higher percentage grade by two or five points to obtain an A or A+ respectively.
- A (Level 4, beyond government standards) 80% and above
- B (Level 3, at government standards) 70–79%
- C (Level 2, approaching government standards) 60–69%
- D (Level 1, well below government standards) 50–59%
- R (Remedial standards, used from grades 1 to 8)
- F(Failing standards—used in high schools), below 50%.
(until August 2010)
(since September 2010)
- A+: 100 (Outstanding)
- A: 95 (Better than Most)
- A-: 90 (Excellent)
- B+: 85 (Very Good)
- B: 80 (Good)
- B-: 75 (Fairly Good)
- C+: 70 (Satisfactory)
- C: 65 (Pass)
- C-: 60 (Marginal pass)
- D+: 55 (Marginal fail)
At a high school level, most subjects are separated in three competencies. On report cards, marks are normally shown as numbers and an average of the two marks associated to the subject will be calculated. For example, if a student achieves A, A- and B+ in a subject, teachers will calculate an average of the three marks (in this case, 85%).
Quebec passing mark is 60% and not 50% as compared to some other provinces. Note that it is common practice for students to pass with grades in the range of 55% to 59% at the teacher's discretion. Also worth note the military pass mark is also generally 60%.
Note: Most schools in Quebec have now switched to percentages. The mark the students receives is the mark that is shown. The 60% passing mark remains.